I like the new(ish) feature where you can drag a section plane through a component, but is it possible to program a moving section and record it to an avi file? Is this something I can do in 3ds, Studio or Showcase? IV2013
View 1 RepliesI have a section view base map that has labeling at the grade breaks of a corridor section. (see correct labels image)
I made a minor change to the alignment the corridor is using and when I opened my section base, most of the section view labels were messed up. (see messed up labels image)
Some views were missing labels and in others, they were grouped together in a lump.
The settings I am using are in the third image. If I checked either the start or end offset box, then unchecked it and closed the dialog, the labels would fix themselves.For reference, there are about 300 section views in this base drawing.
Civil3D 2014 SP1
Win 7 Professional - 64-bit
HP Z400
Xeon W3550 @ 3.07Ghz
24GB of RAM
Nvidia GeForce GTX 760
my issue is I have created a style for cross sections that work well in one drawing, and need to copy them to our template. I have been able to copy the styles for the section view, section plot, and some section labels that I needed. However, I cannot find out how to copy over the style that labels my corridor section in the cross section view. When I go to look at what type of object style it is, all I get is a "Obect Style" dialog box. I have been trying to open every setting to find it and have had no luck. I have attached three screen shots. The first is what I want the cross-section to look like, the second is what it currently looks like in the template, and the third is the dialog box I am getting.
View 2 Replies View RelatedI am trying to verify the bending strength of a solid part. Need to calculate the section modulus on certain cross section. Don't know how to do it using inventor.
View 7 Replies View RelatedThe section view behaves strangely with the ‘section participation: none’ components
Invertor2012 sp2
Win7 x64
why my section is not parallel with my section line. I did constrain my section line in the section line sketch.
View 2 Replies View RelatedIn the drawing view below, I want to section the green assembly only within the red section. I've tried this with a breakout and it doesn't work. There doesn't seem to be a way to exclude the green from the section and yet include it in the breakout.
Infrastructure DSP '14 / Product DSP '14 / Vault Professional 2014
Dell Precision T1650
Windows 7 Professional SP1 64-bit
Intel E3-1270 V2 3.5GHz / 32G RAM
Nvidia Quadro 2000, Driver 331.82
Space Navigator, Driver Version 6.17.7
How can I revolve the top section to blend into the bottom section.
View 2 Replies View RelatedI am designing a baseball uniform using paint.net. The player's name on the back of the jersey is not centered. I need to somehow move the name and only the name to the right. I know nothing about paint and the move tools don't do anything except shade the entire drawing.
View 12 Replies View RelatedI'm working on a project where I need to animate some dots exactly the same way as the attached youtube video.
View 2 Replies View RelatedI'm simply trying to animate the y axis of a symbol with code. When I rollover one symbol, I'd like it to move the symbol it's inside a certain distance. Never seems to work. I've tried looking up the simple jquery syntax to change an image's y position, but it's hard to find!
This is what I have so far:
sym.$("grouped_image").animate({"top" : "+=50px"}, 500);
I'd like to batch crop all while moving the cropped section with each file. This is for time lapse, so it will consist of about 500 files. I'm hoping it will give the effect of panning. I can do this in vegas but I have to zoom and pan AFTER the file is made. The zoom reduces the quality bad. My thinking is that if I can do this with picture files prior to making the video, the quality will be much better.
View 3 Replies View RelatedThere is an element that I don't want to move (x and y co-ordinates) but I want to add effects to it (like bounce effects). How do I do this?
View 1 Replies View Relatedi have a school project, which is making website. i need a tutorial on how to make moving interactive pattern like this http:[url]....
View 1 Replies View RelatedI have a continuously moving looping slide show that has back and next buttons. When you press the next button it should move forward one where ever it is on the timeline every time you click it and the same for the back button.
This is the code I am using but the the problem is that it goes to else {sym.play("one");} when the button is clicked. No matter where in the timeline the next button is clicked, it goes back to number one. I don't know much about coding and I have tried everything to fix this but I am stuck.
var pos = sym.getPosition()
if (pos <= "one"){
sym.play("twenty");
}
else if (pos <= "two"){
sym.play("three");
}
[code]....
I have a cylindrical tube that I need to animate moving 180 degrees around a central axis remote from the cylinder. I also want to create a circular motion locally for the cylindrical tube as it follows the 180 degree arc.I planned on creating the 180 degree rotation first and then the local circular motion second.
When I created the first motion I tried to use an object (another cylinder) as the transform centre for the rotation. As soon as I click on "Auto-key" the "Use transform centre" option is greyed out. I therefore moved the cylindrical tubes own pivot to the required position for centre of rotation. After I created the 180 degree rotation I moved the pivot back so that I could create the local rotation. At this point I find that the original motion has now changed to suit the new pivot point.
how I can get the "Use transform centre" option to work in this instance?
How to do image moving based on mouse movement in adobe edge animate 1.0?Just like drag and drop option in flash
View 3 Replies View RelatedI want to select part of an image with just one layer. Say I just flattened the image and have to move one part of. I select it with the rectangular select tool. It seems intuitive that I could then just move what I selected, but when I drag the selection, the selection itself moves without moving what is inside the selection.
If I then remember to click the move tool and try to move what's in the selection (seems to work sometimes, maybe when there's multiple layers?) the entire image moves.
The only way I can move part of the image over is if I make a selection and then cut it (ctrl X) then paste it.
How am I supposed to move part of the flattened image, is there a way I can set it to default to "When I select something, I can immediately drag that selected area around."
I'm looking to basically do what this video shows:
[URL]........
I just want to create a section from the point cloud, but the point cloud won't allow me to select it as an object in the 'Generate 2D/3D section' dialogue as it's not a solid/surface.
On an unrelated note, I find snapping to the point cloud impossible - is there an option in OSNAP that I'm missing? I've tried this with attached PCGs and RCP point clouds, no difference.
I have lots of section views with some surfaces and pipes. Unfortunately, in a number of section views pipes are not shown in full height because the section view level range is too little. What I am wondering is - is it possible to automatically adjust section level ranges so that they fully include pipe sections? Please see also the image in the attachment.
View 2 Replies View RelatedC3D 2012...but this feature has probably been in C3D for sometime
1-What is a 'Line Marker in Section' Section component of an Alignment Style?
2-How is it used (example )?
When i am creating section sheets from multiple section views ,section sheet view port scale changes.I did set it correctly in my template.
For example it changs from 1:150 to 1:150_1
Then in section sheets scetions views are not displaying correctly.
When i change view port scale manually it shows correctly.But it should do to all sheets.
What should I do?
In model spacr multiple section views are showing correctly.
AutoCAD Civil 3D 2012 SP 2
Sri Lanka
Is it possible to add additional cross sections (sample lines added after views were created) to an existing Section View Group?
C3D 2012 SP3 & C3D 2014 SP1
Win 7 Professional 64 Bit
In my section editor my labels show up correctly and in all the locations I want. But then, in my cross section file, I look in my section views and they are completely different. When I try to label more points under the Code Set Styles, they won't even show up on my section views.
View 6 Replies View RelatedI think I just haven't done this in a while and can't find the right setting.
I have existing sections.
I have section views.
I created a corridor.
How do I add the corridor section to my existing cross-section in the section views?
I can view them in the corridor section editor. But I should also be able to add the corridor section to my section views, right?
To plot them, do I NEED to do this through Sheets Sets? I don't have experience with sheet sets yet.
I don't use Civil 3D often enough anymore. Still learning much about the new interface and pulling a design together.
I've got a corridor where the section editor does not show a section that the corridor has created. My frequency is set to 25' with high/low points along curves. At station 22+75, in the model space the corridor shows a section being created (image #2). However, I cannot edit or even see that section in the section editor (image #1). The first screen shot shows the list of stations for the corridor in the editor while the second screenshot shows the model space at the problem station. This is in the middle of a region, so there shouldn't be any issues with other assemblies or regions.
In the section editor, Sta 22+74.91 is listed, skips 22+75, then lists 23+00. I am needing to manually adjust the cross slopes of my lanes. If I view the surface there is a weird dip because at station 22+75 the default slope of my lane is -2%. I cannot edit station 22+75, so I cannot adjust the cross slope of the lanes.
What is causing the section editor to not even recognize a section? How can I edit the cross slope at station 22+75 if the editor doesn't even display that section?
Infrastructure Design Suite Premium 2014
Civil 3D 2014 x64
Windows 7 64-bit
6GB RAM
I am working in Civil3d and have a 3d polyline that i want to generate a 2d section line of i.e the path of the section plane is along the 3d line
View 1 Replies View RelatedSo I am trying to create section views that detail the correct assembly of two parts.
These parts are welded on top of each other so its important to have clear understanding of how they fit together.
So imagine a pipe bent in the shape of a circle, in the horizontal plane, then holes drilled into the top (vertically) and then another pipe fitting in the holes and being welded together. This is what is happening.
So I am trying to create a section view of one of the holes with the welding information.
When I go to create the section view, I draw a line that would pass through the center of the large horizontal circle (but doesnt) and the center of the hole I am trying to detail and through to the outside of the horizontal pipe.
Now with this line I should get a view of the assembly exactly perpendicular to the line from that point. This is what is called "Aligned" in Inventor and what I was taught as a "Section View". However, this is not the case at all. I get what is called a projected section view.
find a way to get an "Aligned" view of this without sectioning the entire assembly. I just want the small bit necessary to show the relevant information.
how do i trim away the section on RevolutionSrf1 underneath features RevolutionSrf2 and LoftSrf1 ?
Inventor 2012
I need to divide a bridge deck section (sort of trapezoidal shape with circular hollow section inside) but I need to keep the centroid level of each section to be at the same height. is there any simple way of doing it using Autocad 2014?
View 0 Replies View RelatedSo, I we were taught autocad at hour school but not autocad architecture because apparently autocad architecture is too "advanced" for us. so now I need to draw window details (thermally broken aluminum frame window with insulating glass unit) but it is so much work in autocad however I was told that I can just draw a window in autocad architecture and just cut a section and just make a few adjustments to get the window detail.
View 6 Replies View Related