a powerpoint presentation, for a software package that I have designed, and written, for use with AutoDesk Inventor.Could I ask you if you could spare just 2 minutes of your time to look at the presentation, so that I can gauge your impressions of the software, and the power point presentation itself.
The powerpoint presentation will give you a brief description of the software's capabilities
I am attempting to reduce the poly count of a 3D model using the Batch ProOptimizer utility. However, the tool uses Predefined 'Vertex' % and not Predefined Polygon %. I need to reduce the polygon count by 60% 40% and 18%. /how this could be achieved?
View 1 Replies View RelatedI have a batch program which I want to launch from a LISP program.
First this is an attempt at an automated process whereby user input is extremely restricted. Other than the first click of the mouse on the menu item to save a copy of the file to a very restricted folder, no other user input is allowed.
AutoCAD, like most commercial apps writes a temporary file and then renames it when you choose save or saveas. And due to the restrictions in this folder that will not work. Crazy, I know but it's the parameters I must work within.
The batch file I'm launching calls another batch program in it's execution and I'm wondering if that could be where control is lost. But the thing is I can type this at the command line in AutoCAD:
(startapp "//a_very_long/novell_server_path/my_folder/vlisp/mybatchfile.bat")
The whole process works great. The command window flashes briefly AutoCAD closes the active drawing window just like I want it to. And when I check that the dwg file has been copied to the restricted folder it's there and done. But when I place that same command within my LISP program or one like this:
(command "._STARTAPP" "CMD //a_very_long/novell_server_path/my_folder/vlisp/mybatchfile.bat")or(command "._STARTAPP" "CMD ""//a_very_long/novell_server_path/my_folder/vlisp/mybatchfile.bat"")
or just about anything else I try it fails to run. Perhaps I've been looking at this problem too long. I think I may move on to a VB.NET process to do this but I am really baffled why it will run from the command line but not within the program.
I've got a number of images that are 300dpi which I need to save for the web. I've been able to take one image and change the dpi to 72 and then go into Image Ready and shrink the size some more. I've tried to automate the process but after I run a batch I actually get the files back double their original size. What might I be doing wrong here? I'm using PS 7 and, while in no way a professional, I can get by... except for this bit obviously! So, what's the best way to automate the process of turning my files into nice, lean web-ready images?
View 2 Replies View RelatedI have been having this issue with autocad generated color PDF printouts having "fuzzy" fonts and some other black objects. What I have traced it to is that the PDF created by the stock Autodesk PDF ePlot renderer/driver is printing those fonts (and other things like lines with global width) in rich or enhanced black. 75,68,67,90 CMYK to be precise. When this is done without some sort of 100% K border (and sometimes even with) it leads to a blurring of the edges because the registration is never perfect. There is often even some ghosting due to the sheer amount of toner.
Some printer drivers have a way of forcing or selecting this "Enhanced Black" but I see nothing in the settings. I wonder if this can be externalized. It seems that at least fonts should almost never have this turned on.
I am trying to batch print a series of Inventor dwg's (2012) thru task scheduler.
However, if I try to select any files that have a "-" in the filename it get teh following error: "....... The above filename is invalid."
Filename example: XXXXXX-XXXX.dwg
I have tried files without the "-" and they appear to work just fine from the same folder.
Is Task Scheduler limited on characters? If so what are the limitations on filenames that Task Scheduler will work?
Win 7 64 bit.
Inventor Pro 2012
I have version 2002. How can I print to a pdf file so I can e-mail those files to customers?
View 5 Replies View RelatedWe just started in 2014 last week. When we batch plot to PDF using the DWG to PDF driver we get multi-page files no matter which is selected in the Publish Options. Any way to allow single sheet PDF creation?
View 9 Replies View RelatedHere are my current steps for getting prints to shop floor;
1. download a list of drawings required from as/400 into Excel.
2. saveas .csv file
3. print mfg labels using label program reading .csv file
4. using labels, open .dwg from ACAD one at a time and print ea
5. apply labels to prints
6. give to mfg
I want to do this;
1. download a list of drawings required from as/400 into Excel
2. run macro to concanteate file location, name and .dwg to new column
3. run macro to print each drawing either from Excel or Acad - not sure which is better;
- Each drawing will have all label data incorporated in the drawing
- currently nothing is in the drawing for label data, I'll need to create it.
- should I insert a block that updates with the excel row data
4. give to mfg
My first goal is to be able to batch print with the same list that I use to create the labels, then I'll focus on getting the label data incorporated on the drawing.
How I can put in VBA the Automated centerlines. Because I looked for and not find nothing that can do this.
View 4 Replies View RelatedI have an assembly that is a general model with different modules that all are iAssemblies.
With this model I can speed up the design process at the company I am working for.
In the model I only choose the correct member for the iAssemblies and the assembly updates correctly and just with a couple of clicks I have made a configuration of all the modules.
Now, I would like to take it a step further and have the drawing, for the specific configuration, generated automatically.
In the drawing I would like to have the master assembly presented in sheet 1 and the modules presented separately in different sheets, all sheets with BOM lists.
Is this possible to do?
(Next step is to export all the BOM lists to an excel document that can be sent to the product co-ordinator to build up the database system)
I would like to introduce a macro to handle the skeletal method.
[URL].........
I am mechanical drawing and search a better way for the drawing generation. I have to learn some of VBA (or VBS?) for use Ilogic rules. My questions are:
1.- How learn or search more easily and faster the inventor objects for drawings and how to use this objects, undestanding the relationship between its function names and another properties for writing the correct mode in VB? I know some of VB buti see that the library objects from Inventor are "a lot of stuff".
2.- Is there a rule that can get, automatically, the centerlines from a drawing, when the drawings is generated in a idw file? (10 drawing in one idw file ).
Intel i7 2630 processor
6 Gb Ram
Nvidia GT350
creating a named sketch block (in an ipt) containing entities that I have created in the same sub? I'm doing this from Excel, in Inventor 2010.
What I have:
Function CreateUncutTagSketchBlock()Dim IVApp As Inventor.ApplicationDim oDoc As DocumentDim oCompDef As ComponentDefinitionDim oSketch As SketchDim oTG As TransientGeometryDim FileName As StringDim Coords(1 To 10) As Point2dDim oSketchCircle As Circle2dDim oSketchArcs(1 To 2)
[code]....
note that i've also taken a shortcut with the arcs, and the circle. I did try to create them using the same naming convention as the lines, but... I failed to implement it successfully.Also, I can not quite figure out how to constrain all the start/end points together.
Is there a reason a sheet metal "cut" isn't an option for the automated centerlines tool? Am I overlooking something? When I make holes in sheet metal parts, I draw the circle then "cut" it into the sheet metal. For some reason I can't find how to give those automatic centerlines on drawings.
View 6 Replies View RelatedWhen I click to to automated centerlines, it usually places a vertical/hozional centerline on all the circles in the drawing like in the first attachment. But, sometimes it will make the centerline to angle around the center like in the second attachement.
What you have to do so that the centerline come off at angles like in the second picture?
Otherwise I end up using the centerline feature and drawing them all in which is a real hassel!
I am trying to generate automated drawing for my assembly and iam trying to run the following code
Imports Inventor.ViewOrientationTypeEnum
Imports Inventor.DrawingViewStyleEnum
dim oDrawingDoc as DrawingDocument
dim oPartDoc as Document
dim oSheet as sheet
dim oTG as TransientGeometry
dim oView1 as DrawingView
[code]....
but when i run the code its asks me whether you want to generate the drawings, but when i say yes shows runtime argument error as show below
Error in rule: Rule0, in document: pin
The parameter is incorrect. (Exception from HRESULT: 0x80070057 (E_INVALIDARG))
when i ask for more info it shows the following error
System.ArgumentException: The parameter is incorrect. (Exception from HRESULT: 0x80070057 (E_INVALIDARG))
at System.RuntimeType.ForwardCallToInvokeMember(String memberName, BindingFlags flags, Object target, Int32[] aWrapperTypes, MessageData& msgData)
at Inventor.Documents.Add(DocumentTypeEnum DocumentType, String TemplateFileName, Boolean CreateVisible)
at LmiRuleScript.Main()
at Autodesk.iLogic.Exec.AppDomExec.ExecRuleInAssembly(Assembly assem)
at iLogic.RuleEvalContainer.ExecRuleEval(String execRule)
I have an issue where 2 users need to work in an .idw file on sepearate pages, however it appears that not all the changes carry over whenr the repective users save and update.
View 4 Replies View RelatedHow do I batch print several exposures at one time that differ in orientation (Landscape, Portrait) or print size (4X6 - 8 X10) or both orientation and print size? I currently have Lightroom 2.3 installed on a XP SP3 machine.
I have been unable to find any documentation on this subject.
I'm trying to setup an assembly based on a complex 3D sketch. In simplest terms, if I have a sketch for the perimeter of a house, I'd like to add instances of a 2x4.ipt at specified locations automatically. That's not necessarily every 16", but rather wherever I put a specific geometry. I'm imagining two work axis or sketch lines, one along the perimeter to determine the location of the 2x4 and one perpendicular to determine the direction the 2x4 points.
In actuality my sketch won't be a rectangle, but rather a complex 3D spline, that's why I'm hoping to get some sort of automated process. And the current design involves somewhere on the order of 1500-1800 2x4s. Making the sketches and geometry will be nightmarish enough, I'd prefer to be able to breeze through the assembly portion.
I'm attempting to create a model that autmotaically derives ready-to-go drawings. I've gotten pretty far in doing so but have a few issues with regards to dimensioning. As I'm sure you're aware, when the model changes, a dimension to that feature, which has been removed, is also deleted and some those dimensions do not return once the model is changed back.
I have looked into using different view representations, but have found that they do not accommodate feature supression.
Is there a way to program in the dimensioning of a view.
Create center points for of the holes and center lines.
And for a feature note such as "Hole and Thread" dimensioning, when the model expands, the leader and text length do not change and proceed into the view. Is there a way to fix or anchor the text to a certain spot on the drawing, and have the leader length expand and change accordingly to that point.
I'm attempting to create a model that autmotaically derives ready-to-go drawings. I've gotten pretty far in doing so but have a few issues with regards to dimensioning. As I'm sure you're aware, when the model changes, a dimension to that feature, which has been removed, is also deleted and some those dimensions do not return once the model is changed back.
I have looked into using different view representations, but have found that they do not accommodate feature supression.
My questions are:
Is there a way to program in the dimensioning of a view
Create center points for of of the holes and center lines
And for a feature note such as "Hole and Thread" dimensioning, when the model expands, the leader and text length do not change and proceed into the view. Is there a way to fix or anchor the text to a certain spot on the drawing, and have the leader length expand and change accordingly to that point.
How can I force all users in a domain to load the same add-ins with Inventor Professional 2012?
View 3 Replies View RelatedI recently created some iLogic based components. I wonder how difficult it is to protect the iLogic code, similar as VBA code which can be password protected.
The reason being:
1. Of course, to hide & protect the creator's modeling logic;
2. To avoid the relation between parameters being messed up by the end user unintensionally.
I did have the opportunity to raise the question during the Portathon event and the answer was that the protection not directly available, though the workaround could be mixing with some Inventor API coding in .NET.
However, this might defeat one of the benefits of iLogic, simple and ease to use, gentlr learning curve, especially for users with VBA experience. .NET might not be so easy for a lot of engineers from mechanical or other disciplines.
1 Disable the "Edit" button for iLogic components, including rules, forms, etc.;
2. Put all code that are to be protected in an external file, and then make that file unreadable (password protected, or other protection) to un-intended user, however, readable to those who have proper access privelege.
We are using Autodesk Inventor for our 3D modelling and we are working together with a group of scientists.
Those people would like to see our models, rotate them, take measurements, change the visibility of parts or subassemblies and maybe even make cross sections.
It works quite well with the Design Review program, but unfortunately our scientists mostly use Mac OS or Linux. Running Design Review under a windows emulation is not an option for our big models.
We are currently using Inventor 2013 without Vault and I discovered that multiple users can open the same IPT file at the same time with no warning message or read only access like we get in Autocad. We have 6 designers all using the same Project that is a single user project. We normally don't have more than no person working on the same part or assembly, but it did happen. Two designers opened the same file to make separate changes not knowing that the other was in the file. Not until one of them went to save the file did he know someone else was also in the file. When he went to save the file he then got a warning - "A later version of this file has been saved by (user). Saving the file would overwrite changes, which is not allowed. If you wish to preserve your changes, use the Save Copy As command." In Autocad if you try to open a file that someone else has open you get the warning right away and are forced to open it read only or not at all. Is there a way to set Inventor to do the same thing? Other than using Vault and having to checkin/checkout every file. Our six designers work on an average of 50+ parts per week and many times have multiple files open at the same time to use as reference. Also the shop floor opens our files to use for programming and asking them to checkin/checkout files would not be received well. The shop floor has "read only" rights as determined by our network. Does our network settings determine if more than one person can open the same file?
View 9 Replies View RelatedI'm currently trying to make an automated fence generator with Inventor 2012 driven by iLogic rules.
My model is done now, and my BOM information (description & part number) is set correctly.
Now is my problem some parts are not supposed to be in the BOM at a certain moment.
Example.
If fence_type = 1 Then
Beam-001 = default
Else If fence_type = 2 Then
Beam-001 = reference
Else If fence_type = 3 Then
Beam-001 = reference
End If
But what do write to set BOM status of a part?
Inventor 2013
pdf drawings are king at our company. When we creat a product, pdfs (and sometimes stp files) are generated and placed in folders organized numerically by part number.
Our challenge is that finding all the current pdfs for an assembly is not automated. Thus, to get all the current drawing pdfs, someone has to open up the top level pdf, read all the part numbers, go get/print the pdfs of the parts, subassemblies, subassembly parts, etc. This is time consuming and error prone and getting worse as the number of parts we always increasing.
I'd like to automate the process. I'm thinking about a program/script that: Extract parts list from pdf of Inventor assembly drawingCopy pdf of individual parts/subassemblies to a directoryMerge all pdf for that assembly into single pdf.
INV 2013
We have a number of remote users who must have access to our files via Inventor Viewer. When reviewing the system requirements for Inventor Viewer 2014, I noticed that it lists only Windows 7 and Windows 8. Was XP omitted by mistake, or will Inv Viewer truly not work on machines running XP?
View 6 Replies View RelatedWithin my InventorAddin in vb.net we are trying to force users to a particular folder when they save 3D Parts, Drawings etc.
This 'SaveAs' form does indeed fire, but after the 'Inventor' own 'SaveAs' form window. Can we suppress 'Inventors' window or even change that so it points to our preferred location.?
If we do not do this we are goinf to have 3D Drawings in the Parts folder etc etc.
PrivateSub applicationEvents_OnSaveDocument(DocumentObject As Inventor._Document, BeforeOrAfter As Inventor.EventTimingEnum, Context As Inventor.NameValueMap, ByRef HandlingCode As Inventor.HandlingCodeEnum) Handles applicationEvents.OnSaveDocument
If iApplication.ActiveEditDocument.FileSaveCounter = 0 Then
[Code].....
Is the command "exportPDF" and various options available in .NET or VB.Interop?
Goal: To batch print (publish) drawings from our master database so we always have PDF's on hand in our shared drive.
I'm using Autocad 2011 with the included PDF feature.