AutoCAD Inventor :: ILogic Coding To Create Automated Drawing?
Feb 14, 2012
I'm attempting to create a model that autmotaically derives ready-to-go drawings. I've gotten pretty far in doing so but have a few issues with regards to dimensioning. As I'm sure you're aware, when the model changes, a dimension to that feature, which has been removed, is also deleted and some those dimensions do not return once the model is changed back.
I have looked into using different view representations, but have found that they do not accommodate feature supression.
My questions are:
Is there a way to program in the dimensioning of a view
Create center points for of of the holes and center lines
And for a feature note such as "Hole and Thread" dimensioning, when the model expands, the leader and text length do not change and proceed into the view. Is there a way to fix or anchor the text to a certain spot on the drawing, and have the leader length expand and change accordingly to that point.
View 2 Replies
ADVERTISEMENT
Feb 14, 2012
I'm attempting to create a model that autmotaically derives ready-to-go drawings. I've gotten pretty far in doing so but have a few issues with regards to dimensioning. As I'm sure you're aware, when the model changes, a dimension to that feature, which has been removed, is also deleted and some those dimensions do not return once the model is changed back.
I have looked into using different view representations, but have found that they do not accommodate feature supression.
Is there a way to program in the dimensioning of a view.
Create center points for of the holes and center lines.
And for a feature note such as "Hole and Thread" dimensioning, when the model expands, the leader and text length do not change and proceed into the view. Is there a way to fix or anchor the text to a certain spot on the drawing, and have the leader length expand and change accordingly to that point.
View 9 Replies
View Related
Apr 12, 2013
I am setting up template .ipts and .idw for my company, and i run Adept to save and store my files. Now i have a code to automatically make a .idw after i save an .ipt. but then after every save (adept saves the .ipt a lot of times) it will ask to make a drawing for the .ipt. well i was wondering if there is a code to put in a rule to disable the event triggers, and place that rule on the trigger after close document. so that the next time i open the document no event triggers will work.
View 1 Replies
View Related
Jun 12, 2013
I am mechanical drawing and search a better way for the drawing generation. I have to learn some of VBA (or VBS?) for use Ilogic rules. My questions are:
1.- How learn or search more easily and faster the inventor objects for drawings and how to use this objects, undestanding the relationship between its function names and another properties for writing the correct mode in VB? I know some of VB buti see that the library objects from Inventor are "a lot of stuff".
2.- Is there a rule that can get, automatically, the centerlines from a drawing, when the drawings is generated in a idw file? (10 drawing in one idw file ).
Intel i7 2630 processor
6 Gb Ram
Nvidia GT350
View 4 Replies
View Related
Sep 26, 2012
I'm currently trying to make an automated fence generator with Inventor 2012 driven by iLogic rules.
My model is done now, and my BOM information (description & part number) is set correctly.
Now is my problem some parts are not supposed to be in the BOM at a certain moment.
Example.
If fence_type = 1 Then
Beam-001 = default
Else If fence_type = 2 Then
Beam-001 = reference
Else If fence_type = 3 Then
Beam-001 = reference
End If
But what do write to set BOM status of a part?
Inventor 2013
View 5 Replies
View Related
Aug 17, 2012
I am trying to generate automated drawing for my assembly and iam trying to run the following code
Imports Inventor.ViewOrientationTypeEnum
Imports Inventor.DrawingViewStyleEnum
dim oDrawingDoc as DrawingDocument
dim oPartDoc as Document
dim oSheet as sheet
dim oTG as TransientGeometry
dim oView1 as DrawingView
[code]....
but when i run the code its asks me whether you want to generate the drawings, but when i say yes shows runtime argument error as show below
Error in rule: Rule0, in document: pin
The parameter is incorrect. (Exception from HRESULT: 0x80070057 (E_INVALIDARG))
when i ask for more info it shows the following error
System.ArgumentException: The parameter is incorrect. (Exception from HRESULT: 0x80070057 (E_INVALIDARG))
at System.RuntimeType.ForwardCallToInvokeMember(String memberName, BindingFlags flags, Object target, Int32[] aWrapperTypes, MessageData& msgData)
at Inventor.Documents.Add(DocumentTypeEnum DocumentType, String TemplateFileName, Boolean CreateVisible)
at LmiRuleScript.Main()
at Autodesk.iLogic.Exec.AppDomExec.ExecRuleInAssembly(Assembly assem)
at iLogic.RuleEvalContainer.ExecRuleEval(String execRule)
View 5 Replies
View Related
Jan 23, 2013
creating a named sketch block (in an ipt) containing entities that I have created in the same sub? I'm doing this from Excel, in Inventor 2010.
What I have:
Function CreateUncutTagSketchBlock()Dim IVApp As Inventor.ApplicationDim oDoc As DocumentDim oCompDef As ComponentDefinitionDim oSketch As SketchDim oTG As TransientGeometryDim FileName As StringDim Coords(1 To 10) As Point2dDim oSketchCircle As Circle2dDim oSketchArcs(1 To 2)
[code]....
note that i've also taken a shortcut with the arcs, and the circle. I did try to create them using the same naming convention as the lines, but... I failed to implement it successfully.Also, I can not quite figure out how to constrain all the start/end points together.
View 2 Replies
View Related
Mar 7, 2012
pdf drawings are king at our company. When we creat a product, pdfs (and sometimes stp files) are generated and placed in folders organized numerically by part number.
Our challenge is that finding all the current pdfs for an assembly is not automated. Thus, to get all the current drawing pdfs, someone has to open up the top level pdf, read all the part numbers, go get/print the pdfs of the parts, subassemblies, subassembly parts, etc. This is time consuming and error prone and getting worse as the number of parts we always increasing.
I'd like to automate the process. I'm thinking about a program/script that: Extract parts list from pdf of Inventor assembly drawingCopy pdf of individual parts/subassemblies to a directoryMerge all pdf for that assembly into single pdf.
INV 2013
View 4 Replies
View Related
Sep 30, 2013
I'm trying to figure out how to create an iLogic rule that would create a Custom iProperties and put in what version of Inventor the file was last updated with.
View 8 Replies
View Related
Jul 4, 2013
I would like to automate drawing process for certain data. Using some LISP codes User will be asked to provide some data and using that data an automatic drawing needed to be developed at Drawing editor of AutoCAD. For example;
Enter the width of Sheet: 50 mm
enter the length of Sheet: 200 mm
Enter the sheet thickness: 5mm
Enter type of feed: Automatic
Are there holes in Strip: Yes/No
Specify nu of holes: 5
Position of holes Centre: 5,5
Distance between the holes: At an interval of 20mm each
I just need a LISP code for such program.
View 9 Replies
View Related
Sep 18, 2013
I have a few assemblies setup that are controlled with a bunch of iLogic rules to modify all related parts when parameters are changed at the assembly level. I also have an opening message that pops up when the assembly model is opened (After Open Document trigger) to tell people how to use the parameters to make modifications.
Now, when this assembly model is placed into a drawing I am getting random pop ups of the opening message when placing views of additional models in the same drawing. If you open the drawing and try to place a base view of another model, Inventor stops to think for a minute or so before having the opening message of the iLogic controlled model pop up. The only event trigger for this message is "After Open Document" and the model is not being opened; why it is being triggered in the drawing and/or how to make it stop?
View 4 Replies
View Related
Apr 24, 2012
Is there a way in an inventor drawing rule to do a "save as" which saves the drawing as an Inventor dwg file rather than an AutoCAD dwg file?
The below saves as AutoCAD which is ok but I need the outputted drawing to be linked to the model. I don't want the code to save the entire assembly as this is done further down the line. I also don't want to save the current inventor dwg drawing from which the rule is run as this is just a template drawing.
ThisDoc.Document.SaveAs(ThisDoc.Path&"2D_DRAWINGS"&iProperties.Value("Custom", "Drawing No.")&" (Rev "&Parameter("BEAUFORT_ARRANGEMENT_3.iam.DRAWING_REVISION_NO")&")"&".DWG", True)
View 1 Replies
View Related
Apr 19, 2013
have 2 questions
1.) If you look at the attached screenshot in the Edit Sheet form there is a sheet "Revision" input field is it possible to fill this out via iLogic?
2.) We have some custom E size sheets (height always 34in width varies 5ft, 6ft, and 8ft) when we select on of these sheet sizes that we created it will display "Custom Size (inch)" when using the sheet property <sheet size> in the title block not the name of that we gave these sheets (Which creatively enough is "E-5ft", "E-6ft", and "E-8ft"). I thought I had this solved by doing this:
Dim oSheetSize As String
oSheetSize = ActiveSheet.Size
If oSheetSize = "Custom" Then
iProperties.Value("Custom", "SheetSize") = "E"
Else iProperties.Value("Custom", "SheetSize") = oSheetSize
End If
then change the titleblock sheet size field from sheet property <sheet size> to custom drawing properties <SheetSize> this all works great if there is only 1 sheet in the IDW where it fails is if there is more then one sheet.
View 2 Replies
View Related
Jul 4, 2012
I recently start to use ilogic in inventor and discover this powerfull tool for all the daily task to be done...
I would like to add an autocad block in a drawing with some ilogic coding. Through this forum i found how to insert a sketched symbol but no how to insert a block. And convert my block into a sketch would be quite difficult...
where could i found a list of all the ilogic command??
Autodesk Product Design Suite Ultimate 2013
Win 7 Pro 64 bits SP1
Bi-Xeon E5520 (2x Quad-core @2.27GHz)
Quadro Fx 1800 768Mo GDDR3
6Go Ram DDR3 667MHz ECC
View 1 Replies
View Related
Jul 18, 2013
I have a rule setup for drawings. I need the rule to first determine if the there is a flat pattern view present. In other words, if there is no flat patter view, I want to the rule to stop.
I am very green to ilogic and VB. Running Inventor 2013.
View 2 Replies
View Related
Sep 17, 2013
Is there a way to add a revision row with I-logic?
Inventor 2013
View 2 Replies
View Related
Jul 11, 2013
Is it possible to rotate a drawing view using iLogic?
View 2 Replies
View Related
Apr 18, 2013
I'm trying to put together some iLogic code to either check all the drawing views within a drawing sheet are all the same scale, or make the views all the same scale. These drawing sheets consist of a number of individual parts (they aren't projected views from a single part).
This is for welded assemblies. We are required to generate a profile drawing sheet outlining each part that makes up the assembly. We send these out as dwg files for laser cutting so its important that the views are all the same scale.
View 7 Replies
View Related
Jan 8, 2014
I'm wondering if it is possible to check-in drawing into vault using i-logic?
If you check-in a drawing into our vault, it automaticly exports a .dwf to a storage server. We also have a simple button for making .pdf of the drawing to sent to the customer.
What i want to ensure is that the .dwf file and the .pdf file are the same. So when i press "make a .pdf" the rule will save my document, make a .pdf and (if possible) check it into vault. So from that point the .pdf for the client and the .dwf on the server are the same.
Inventor 2013
View 2 Replies
View Related
Oct 8, 2013
I made iLogic for assembly and drawing, now i want to update drawing template parameters thru ilogic, as i already linked Fx(parameters) & iProperties to Template, but for updating template i need to close file and open again that file,
currently m using this method.
What is the solution for updating drawing template (like Model Description, Drawing no.).
View 3 Replies
View Related
Nov 27, 2012
I need to connect the ribs on the drawing. Here are some images to transactions automatically.
ILogic code must perform all operations possible, and impossible to ignore cases.
View 1 Replies
View Related
May 17, 2012
So my problem is that I need to include a line on a part drawing that isn't related to the part itself. I need to be able to override the dimension of the line I sketched so that I can include it in my drawing and update the dimension without having to change anything else on the part.
Basically, I want an iLogic rule to overide a dimension, and I don't know how to do that.
View 1 Replies
View Related
May 4, 2012
If I draw a flat square, and then a flat circle next to it, can I do things using iLogic that will make the two seperate parts interact? such as say 'if the circle contacts the square, then make the square become a circle too' or something like that?
View 3 Replies
View Related
Jul 23, 2012
I am looking to use iLogic to create feature suppression in individual drawing views, i.e for simplicity, in view 1 part has a hole in view 2 part does not have a hole it has been suppressed
I am aware this can be done with iParts but im trying to avoid using iparts.
View 1 Replies
View Related
Aug 6, 2013
Is there a way in iLogic to iterate through all curves on a drawing. We manually apply radii labels to each drawing view but would like to automate the process with iLogic. How could I reference and cycle through all the radii on my drawing view?
View 2 Replies
View Related
Apr 10, 2013
I want to be able to change the header on a PL in a drawing using iLogic.
I'm able to "find" the PL(s) on a drawing but can't seem to figure out how to access the header property My goal to to change the header to show the P/N of the assembly/part it's created from.
My Current code is below:
doc=ThisDrawing.Document
oBOMs=doc.DrawingBOMs
For Each oBOM In oBOMs
MessageBox.Show("Found a PL", "Title")
Next oBom
In between the for/next loop is where I want to access the current BOM and change it's header depending on the related .iam/.ipt.
View 2 Replies
View Related
Jun 7, 2012
Any way, using iLogic, to get the K-Factor from a flat pattern sheet metal view on an idw drawing and add it as a note.
I'd like a rule that would access the flat pattern on the drawing, get the K-Factor value and then create a note that says, for example, "K-Factor Value = 44".
I see in the iLogic Snippets there's a Get Active KFactor under the Sheet Metal section, but I don't know where to start.
View 2 Replies
View Related
Nov 16, 2010
I have a piece of equipment that changes from 24" to 96" with 5 discrete sizes. I am using ilogic to make all the changes required to the part. Any way that I can change the scale of a drawing using iLogic so that it fits better on my drawing and be adjusted every time. I have multiple pages that most of the drawing views need to be changed every time.
View 9 Replies
View Related
Oct 8, 2012
I want to retrieve dimensions in a drawing with ilogic. I found some code but how to translate it into a ilogic code.
I always use assembly models in these drawing and all the parameters have unique names. So in my drawing i want to retrieve some specific dimensions in a view.
View 9 Replies
View Related
Jul 31, 2013
Like the title says I am looking to place views (and dimensions) on drawings using ilogic. I am new to both inventor and ilogic, most of my training came in SolidWorks. It needs to pull the part from an ipart that pulls the information from an excel file.
View 1 Replies
View Related
Apr 18, 2013
how could I synchronize my drawing with the referenced part?
I have a "User Defined Propertie" called "RBMATNO" in the part and in the drawing.
View 3 Replies
View Related
