Encountered crash during work with Inventor 2013?it happens only when viewing 3D part/assembly (not during 2D drawings), sometimes after few hours of work, sometime after only few minutes system and program were reinstalled many times etc. everything that can be change was changed to new parts (ram, etc.)
situation is still the same after crash computer needs to be reeboted with hard reset
I just purchased a new Lenonvo Thinkpad w520 and bluetooth laser mouse and am running auotcad 2012. I can not seem to get the scroll wheel to zoom in/out. A regular corded USB mouse works fine..tried scrollwheel setting, mouse is set to middle button....? Lenovo says it is an application issue
I'm considering buying the Lenovo X300 as I want an ultraportable laptop. As a freelance reporter I occasionally use my computer for basic photoediting and I have Photoshop Cs3. I'm not sure whether the Lenovo X300 will be able to ensure a smooth operation of Cs3. Does anyone have any experience with this or any advice? These are the specs of the X300:Processor: Intel Core 2 Duo 1,2Ghz (SL7100)3 gb RAM (upgradable to 4)64 GB solid-state harddiskGraphics card: Intel GMA X3100
I currently have a Lenovo X61T Tablet PC and I am testing out Photoshop CS4.When I try to set the brush to be pressure sensitive I get the little "!" icon displayed saying that I must have a tablet installed for this feature to work.I also have the FREE program of “Paint.net” installed on this tablet pc and that is able to detect the pressure sensitivity perfectly. So I would have thought this would rule out any driver issue as the functionality is working its just that Photoshop doesn’t seem to detect it and enable it.
I am running LR 4.2 attempting to shoot in tethered mode to my Nikon D300. The laptop is a Lenovo W510 running windows 7 pro x64 with Intel i7 processor with all microsoft and lenovo updates installed.
When I plug in the camera via the USB port and start LR, the tethered mode shows 'No Camera Detected". If I unplug the cable from my laptop and plug it into my Dell Desktop running the same version of windows and the same version of LR, it recognized the camera and will shoot tethered mode just fine. However, the real need is to shoot tethered to my laptop.
I have been through the idiot troubleshoot list on Adobe's website and tried every combination of restarting known to man. I know the camera is in the right USB mode since it works just fine when plugged into my desktop. So, I can eliminate any problem with Nikon, USB cables, LR versions/camera compatibility. The only variable is the Lenovo vs. Dell and possible USB driver issues. Windows does recognize the camera when it is plugged into the laptop, but LR doesn't see it.
I'm working on some vb.net code which updates the sizes of parts within sub assemblies and then selects the correct sub assemblies to place and constrain into a larger assembly.
When I run my software all the sub-assemblies should open, resize and then get placed into the larger assembly.
This code works up to a point. However I'm having some trouble when one of my sub assemblies is placed and constrained into the larger assembly - Inventor crashes.
If I step through my code line by line, it works fine. I think that this is because Inventor has more 'time to think' about what it is doing between placing the sub assembly and constraining it (updating the parts i guess).
After discovering this I wrote a line in my code which uses the vb.net stopwatch class to wait 20 seconds between installing the part and constraining it, this allows everything to work without Inventor crashing.
What I'd like to know is if there is a command i could use in vb.net which would allow me to wait for the sub-assembly to be ready to be constrained rather than waiting 20 seconds? Although this works I don't think it's the 'correct' method of doing things.
I have some large files that I get from a customer in the form of .iges. They give me the .iges because they use CATIA. My problem is that when I try to open the .iges file, it will sit there and try to open in Inventor for about 5 mintues and then the program will just end. It doesn't give me any sort of error message before crashing, it just dissapears. I can open the files in Mastercam just fine. I tried to open the file in Mastercam and save it as a .stp. The same thing happened when opening the .stp in Inventor. I tried to change some of the options that are available when opening these files in Inventor and that doesn't seem to work. I need to get these files open in Inventor desperately.
i got a good one, just installed 2013 and vault upgrades, and all WAS fine until we found a issue. If i trying opening a MODEL (ASSEM OR PART) from the vault server, (not locally), it ill work...yeah....NOW if i do the same thing BUT browser down 3 sub folders, it will crash....fo example, if i browse to ....Railpower ProjectsNew NomenclatureHARDWARE CATALOGCATALOG BB007. choose any part...poof.. good bye inventor. This happens at any folder at 3 levels deep...with any part or assembly. we have do this with about 100+ senerios - different parts - different assemblies. the only thing constant is after going 3 folders deep (or more) it will crash
New installation on a new computer. First was crashing when I adjusted som Applicatin Options. Ran Service Pack 1. That seemed to work. But now I cannot even open up one *.ipt file without it crashing.
we've just migrated to the 2014 release of the inventor suite and use vault basic. With the 2014 version of inventor the program immediately crashes when attempting to open an autocad dwg. Inventor dwg files open fine. We never experienced this issue in our previous release. We only use the dwg format and because the preview is not always available it often happens that we open an autocad dwg in inventor and vice versa. Crash is reproduced on multiple maches.
I'm having a problem with Inventor 2011 professional on a 64Bit machine. I can make any size assembly with no problem but as soon as I go to make an idw the program crashes and shuts down. It doesn't matter if the base view is one part or 1000 parts as soon as I go to place the view inventor shuts down and I get an error.
I've got a recurring problem with using hatch patterns on 2013. Importing a new hatch pattern more than often than not results in Inventor winding up the memory usage on the PC to bursting point as it runs through "Calculating containment of profile areas" that seems to be called when previewing a hatch pattern.
The problem seems to be with more complex patterns (I'm using a stone wall type hatch - mountainledge.PAT is a prime example) and I think the issue is related to the scaling factor used. IF you remember to wind the scale up BEFORE trying to preview the pattern you can get away with a few minutes of down time, but if you leave the scale at 1 its goodnight!
It would be nice if Inventor could warn you (a bit like it does if you foolishly opt for a huge part array) becasue not only do you lose your inventor files but also any other unsaved app data as in my case my Dell M6500 PC just dies as all available memeory just gets swallowed up.
Perhaps I should try multiplying the co-ords in the PAT file by 25.4 as it could be that we use the poorer cousin of the good old inch system. metric???
I am using a DELL M6600 with Nvidia Quadro 3000M (311.10)
I have most Autodesk PDSU software loaded for 2013 & 2014 plus the CFD and Sim software.
Windows 7 x64
This is my demo machine and I find that Inventor 2014 is randomly crashing. (Bad news in front of a customer)!
This happens when I am working in another application whilst Inventor is in the background with a model open.
Inventor will then randomly crash. I don't get the Autodesk crash report - I get the window that states - do I want to close the app , debug or whatever.
This happens almost evertime I go to a .ipn to update changes and save. It freezes w/ no cahnce of coming back. Two other things that is troubling me about the .ipn is that sometimes it will rearange itself w/ all the parts at 0,0,0 and or won't let me ballon any parts. After closing the file and opening it again it either does the same exact thing or takes the balloons but throws the pick points of into space......
Inventor 2010 SP4 Windows 7 Pro SP1 Dell Precision T3500: Xeon W3550 @ 3.07GHz Quadro 600 12GB ram
I am using Inventor 2010 and I want to drag out the Format section of the Annotation ribbon to my desktop so it's always there. I have it like that on my PC but it will not co-operate on my Laptop. Everytime I pull it out, my Inventor crashes. I have the most recent update (version 14.4.0000.28400) and I am running Win7 64 bit. why I keep crashing Inventor?
I'm trying to migrate our styles library from Inventor 2011 to 2013 using the style library manager. I have the current (2013) library loaded in the first slot, and my old 2011 library loaded in the second slot. Under the 2011 library, the Migrate button is active.
I click Migrate, and after telling me it can take up to 2 minutes to migrate the library, it proceeds. After about two minutes, I get a progress box generated by Inventor (not the style library manager) that indicates it is copying some 1300 files from one location, to another. I can't tell if it is the same location or not, as the filepaths are truncated in the progress box.
As it finishes, usually with one file remaining, I get the "Autodesk Inventor 2013 Has stopped working" error. A problem caused the program to stop working correctly etc. etc.
I do not relish having to go back and manually define all my styles.
Context: Product Design Suite Ultimate 2013, Win 7 Pro, 12 GB ram. I've tried both with and without my antivirus realtime scan on.
.My Inventor2009 keep crashing everytime i'm trying to traslate/import Mech. Desktop2009 files....Windows7 is my os platform. Done all latest SP both for Inventor & Mech Desktop.
So 2011 had some issue and I though 2012 would get those fixed. I was wrong. More problems occur. With 2011 I was able to open assemblies directly through vault. Now with 2012, since the vault issue updates as it opens, I crash on any sizeable model or assembly. So now just to open a file, I must get it, then go to inventor and open it, and hit no when the refresh window come up. If I hit yes, it crashes. If I hit no it open, then if i hit local/global update it crashes. So technically I cant do any new work with any of my larger assemblies (2000+ parts) I have sent out numerous error reposrt, only for autodesk to say that they can replicate the problem. I have SP1 installed, and this is happening with other users at my company as well.
System:
Windows 7 64 Bit Solid State HD 24GB RAM Xenon Processor Nvidia Quadro FX 580
cleaned up the fonts and its still crashing by simply scrolling thru to find a file to open and to make matters worse, my CS2 which hardly ever crashed now crashes just opening it. I am rather beside myself, I have an iMac running 10.6.8 with 4GB of memory. I would love to copy and paste the crash report but it's not letting me do that.
I am running AutoCad 2013 LT on a Windows 7 O.S. , 32-Bit, 4gb ram,. After I installed Service Pack (2), getting memory error and crash. Tash manager shows a Acbrowserhost.exe--memory consumption thatcontinuously increases. A co-worker can open the same drawing in AutoCad 2011 LT with no issues. Before the Service Pack was installed, I wasn't having any issues.
I have installed Autocad 2012 LT on Windows XP sp3. The program opened and worked fine after the install. The user was not sure they wanted this version so I did not activate the program right away. After the user decided they wanted to keep this version I activated the program with a license and now the program will not open. Crashes and does not give an error message.
I have tried to uninstall and re-install. I uninstalled netframework 3.5 sp1 and re-installed, still will not open.
I using a 27inch iMAC and running boot camp (WIN 7 Pro 64bit). 16GB RAM. Using NAS network storage.Graphic card. but still slow and crash it is the win 7 aero theme will affect the autocad?
I have just started using 2013, and everything works just fine, with the exception of trying to plot. I am able to plot to PDF, but if I try to send a job to any of my network printers/plotters, AutoCAD crashes.
I am on a Dell Optiplex 990, Windows 7 Pro, 32bit, Intel Core i7 proc, 8GB RAM
i have a couple of grouped dimensions. the second i click on them autocad crashes. i can work on everything else with no problem, but as soon as i click on that group it crashes immediately. is there like 'safe mode' or something i can get into so i can ungroup the dimensions and get things back to normal?
How come I cannot make a legend without AutoCAD crashing?
This video shows that the recover saved the legend that was made but just moving my cursor over it makes AutoCAD crash. It also crashed making a legend in the tutorial.
[URL]
I'm using a Dell Precision T3600 with an Intel Xeon E5-1603 2.80 Ghz + 2.80 Ghz...
