I am using Inventor 2010 and I want to drag out the Format section of the Annotation ribbon to my desktop so it's always there. I have it like that on my PC but it will not co-operate on my Laptop. Everytime I pull it out, my Inventor crashes. I have the most recent update (version 14.4.0000.28400) and I am running Win7 64 bit. why I keep crashing Inventor?
View 8 Replies
Is there a way, in my drawing template, to set one field as "Part Number iProperty from parent assembly on sheet 1 base view"? I want every single sheet in my .idw to reference the same "Part Number" iProperty from the assembly in the base view of sheet 1.
View 2 Replies View RelatedI’m looking to do a drawing of a content center file that has a table associated with it. I’m looking to do a table much like the general table option that pulls in parameters of a std. part. I understand that content center files have no intelligence to thread data but If there is no easy way of doing that I may need to pull in an excel sheet that has the data I need.
Ultimately I would like a table that has the part #, “Dim A”, “Dim B”, etc. that links to text dimensions on the content center part view in the drawing.
The reason I want it to be a content center file is that I have a couple hundred parts that only differ by one or two dimensions and don't want to have to go through that many drawings to update and make changes to.
I am using Inventor 2012 Pro
I am trying to verify the bending strength of a solid part. Need to calculate the section modulus on certain cross section. Don't know how to do it using inventor.
View 7 Replies View RelatedThe section view behaves strangely with the ‘section participation: none’ components
Invertor2012 sp2
Win7 x64
why my section is not parallel with my section line. I did constrain my section line in the section line sketch.
View 2 Replies View RelatedIn the drawing view below, I want to section the green assembly only within the red section. I've tried this with a breakout and it doesn't work. There doesn't seem to be a way to exclude the green from the section and yet include it in the breakout.
Infrastructure DSP '14 / Product DSP '14 / Vault Professional 2014
Dell Precision T1650
Windows 7 Professional SP1 64-bit
Intel E3-1270 V2 3.5GHz / 32G RAM
Nvidia Quadro 2000, Driver 331.82
Space Navigator, Driver Version 6.17.7
How can I revolve the top section to blend into the bottom section.
View 2 Replies View RelatedI am trying to customize Autocad 2012 ribbon tab. I can't seem to find how to mimic the small arrow that appears in several of the standard menus. For example, in the 3D Solids - Home Tab, the second panel from the left is "3D Solids Home - Mesh" It has a small arrow in the corner that opens up a preferences dialogue box.
How can I add that arrow to a custom panel with that little arrow so that I can add my command to it?
Where are the bits of the Ribbon API to add a slide out to a ribbon panel?
Autodesk.Windows.RibbonControl ribbonControl = Autodesk.Windows.ComponentManager.Ribbon; RibbonTab Tab = new RibbonTab(); ribbonControl.Tabs.Add(Tab); // create Ribbon panels Autodesk.Windows.RibbonPanelSource panel1Panel = new RibbonPanelSource(); panel1Panel.Title = "Panel1"; RibbonPanel Panel1 = new RibbonPanel(); Panel1.Source = panel1Panel; Tab.Panels.Add(Panel1);
I saw some source that hinted you could use panel1Panel.AddSlideout() but in the search I do not see any Ribbon API that allows for any slideout functionality?Do you *have* to use the CUI API for this?
I'm not really sure what this is called. But i've seen pictures where the edge of the image is stretched. It's stretched so that only the pixel on the edge of the image is duplicated and it sort of forms streaks of different colors.
View 3 Replies View RelatedIs there some way I can make a picture look like it's going away from you? Similar to what Bulge does, but on a horizon, and affecting the whole picture, or affecting in a gradient-like manor.
View 6 Replies View RelatedI made a circle and used the direct selection tool (AICS5). I clicked on the bottom point thinking I would pull down and make the shape into a sort of ballon shape, or an upside down teardrop. but I got the shape below. It was very cool, as if I was pulling outward on both handles of the bottom point. But I was unable to repeat it. It reminds me of the time YEARS ago - when by accident, I pulled a milliion copies of a shape and had no idea how I did it. Just last week I found out about the tilde key trick and realized that's what happened!
View 6 Replies View RelatedI installed Elements 9 on my MacBook Pro & set IPhoto to edit in Elements. However, when I click on a Edit, the computer opens Elements but does not bring the chosen photo into the program.
View 1 Replies View RelatedI am currently in the process of testing LR4 and use a LR3 library that I converted to LR4.
If I rotate an image from (or to) landscape/portrait I cannot use the crop/rotate tool anymore by pulling the edges. The control sliders work, but not the active corners. If I put the image back to the original position, things work like a charm.
Running Lion/16GB/i7
In the Default.ivb I have created a function that creates a new panel and adds some buttons in the panel.
I see the panel and the buttons, but nothing happens when I click on them.
The documentation says that in order to listen to the events of my buttons I should declare a "Private WithEvents ButDef As ButtonDefinition", but it when I try I get an error message "Only valid in object module"
Another question, still related to the events, I would expect to find a _StartUp event where I should run my function, but I can't find that event.
How to activate specific Tab on the Ribbon by VB.Net code? Exist any way how to "bring to front" my own Ribbon Tab?
View 4 Replies View Relatedis it possible to add a textbox to the ribbons in Inventor 2013?
View 5 Replies View RelatedDim icon_Main As IPictureDisp icon_Main = PictureDispConverter.ToIPictureDisp(My.Resources.Garant)Dim controlDefs As ControlDefinitions = m_ inventorApplication.CommandManager.ControlDefinitionsbt_main = controlDefs.AddButtonDefinition("Projektmanager", "int_projekt", Command TypesEnum.kFilePropertyEditCmdType, app_guid, "beschreibung blabla", "tooltip", icon_Main, icon_Main, ButtonDisplayEnum.kAlwaysDisplayText).
[code]...
When i start this code, a nice tab shows up when i open an assembly, good!But Now i want to show the same tab with the same button in Part Ribbon.
how I can get a form onto the ribbon or create a custom Icon to run it.
I have read up on afew forums that VB needs to be used in order to achive this but I want to double check.
I dont have VB but if it is the only way to get this to work I will download it.
I have just installed Inventor 2013. How can I fix the UI Ribbon cutting off button text? I have attached a photo demonstrating the problem. I cropped the screen shot to only show the ribbon to cut down on excessive image size.
View 9 Replies View RelatedI am new to the ribbon and am having trouble putting more than one button on the same ribbon. I have two addins that both have buttons that need to go on the drawing>Place View tab but I can only see one button. If I put them on different tabs they both appear, what is my problem?
View 1 Replies View RelatedI am having PDS Ultimate 2012 and working on inventor. when i open a file or open a new template ribbon freezes means menu bar doesn't work properly,if i change the ribbon appearance it doesn't update also i cannot switch between the menu bar tabs and if i turn on the visibility of the datum planes it doesn't show on the screen.But when i refresh the windows everything works sometimes. i have installed SP1 and even repaired inventor.
System Config:
OS Name Microsoft Windows 7 Professional
System Manufacturer LENOVO
System Model 20079
System Type x64-based PC
Processor Intel(R) Core(TM) i3-2350M CPU @ 2.30GHz, 2300 Mhz, 2 Core(s), 4 Logical Processor(s)
Name AMD Radeon HD 6370M
Adapter Type ATI display adapter (0x68E4), ATI Technologies Inc. compatible
Adapter Description AMD Radeon HD 6370M
Adapter RAM 1.00 GB
Can I disable ribbon in 2013?
View 1 Replies View RelatedHow to create a ribbon with a button. I am creating an add-in for Inventor. I am trying to put this code in the Activate Sub but it's not adding the ribbon once I open a drawing. Just trying to use this example to get me started.
public void AddParallelEnvironment(){ Application oApp = ThisApplication; // Get the Environments collection Environments oEnvironments = oApp.UserInterfaceManager.Environments; // Create a new environment Inventor.Environment oNewEnv = oEnvironments.Add("Some Analysis", "SomeAnalysis", null, null, null); // Get the ribbon associated with the assembly environment
[Code] ..........
If you make alterations to a model, and then switch to vault menu, your model is red with an asterix (requires saving). If you click check in on this, you get the message that it needs saving, click ok. It appears that it has worked but all the buttons on the toolbar are frozen. if you click the big I all the ribbon greys out and you need to restart Inventor. The only button that still works is Suite Workflows.
I have SP1.1 installed as well as the vault hot fix.
I have switched computers from my laptop to my workstation. My laptop has an Nvidia card FX2500M, and my workstation has an ATI Fire V5600.
I work with the ribbon minimised to tabs. On my laptop, when I click a tab the ribbon opens directly below the tab (i.e. justified to the left of the screen); but on my workstation, the ribbon opens below the tab but justified to the right of the screen. This means I have to move the cursor back and forth across the screen.
Is there a Reg setting to change the justified back to the left of the screen?
When the ribbon minimise is on other settings (e.g. minimise to panel tiles) the ribbon is justified to the left side of the screen.
Inventor Pro 2012 with SP1.
All of a sudden I see that within my Inventor the vault Collaboration ribbon has disappeared. How do I bring this back?
C1
Inventor Professional 2013
Vault Collaboration 2013
When I start Inventor2011 with classic UI only first start set in my addin FirstTime on true, every oder run of inventor FirstTime is false - everythink is OK.
But when I change UI on Ribbon FirstTIme is always True, and every time UI is reloaded -there is bed.
I have problem visualization icon ribbon in PDS 2012.How can restore ?
View 1 Replies View RelatedWhen I open up Inventor 2014 the Vault tab is visible in the ribbon; however, when I create a new file (of any type) the vault tab disappears from the ribbon. I can retrieve it by right clicking on the ribbon, clicking ribbon appearance and selecting reset ribbon. This fix is only temporary because if I close out Inventor and re-open it I must go through the same steps to retrieve the Vault tab in the ribbon. Any way to make it stay in the ribbon so I don't have to reset the ribbon every time?
After digging a bit more I came across the answer: [URL]....
