AutoCAD Civil 3D :: How To Get The Pipe Material To Import From GIS
Jan 27, 2012
I am able to easily import sanitary sewer pipe and structure information from existing GIS information using the import wizard. I do have one issue that I can't figure out how to fix: even though I match the material field in the GIS shapefile to the material field in the import wizard, the material for the imported pipe network defaults to concrete pipe. I have tried updating the shapefile and the part in Part Builder so that the material information matches exactly, but it still happens. I can work around this by selecting "Swap Part" for each pipe and then selecting the correct pipe material and diameter, but this can be tedious when dealing with a lot of pipes.
how to get the pipe material to import correctly?
View 2 Replies
ADVERTISEMENT
Dec 11, 2012
Version Civil 3D 2013....
A pipe network has been created & labeled. All pipes labeled correctly except one. The material for 15", 18", 24" RCP pipes labeled "RCP" but all the 12" pipes labeled "Reinforced Concrete Pipe". So I know I need to change the Material of the 12" pipe to read "RCP". I was hoping to just go to Pipe Properties & change it there for this dwg but it doesn't change.
I was thinking it might be in the part xml file but why would some label "RCP" and the 12" didn't? The Parts Catolog used in this dwg is the default from Autodesk. Also, in the Part List, Material is greyed out. That's the first place I went to change the Material.
View 9 Replies
View Related
Aug 13, 2013
I want to make a pipe label for a plan view that shows the inner dia and pipe material. Howver, material is no one of the choices it gives me for a label part. Is labeling material possible?
Civil 3D 2012 SP4.0 Windows 7 Enterprise 64-bit
C3D 2014 SP1
Dell M6600, Core i7 @ 2.3GHz, 16 GB ram
Dell T3500 workstation, too much ram to post
View 4 Replies
View Related
Aug 5, 2011
I created a pipe network using Civil 3D 2011 and we upgraded to 2012 in the middle of the process.
I've always been able to edit the MATERIAL of the pipe for (I like to add class and type in this column)
It worked fine in 2011 as you can see in the first image.
But in 2012, the material changes that I added in 2011 chow up, but I can't edit them or revise them.
it causes me to have to label my pipes in the label editor instead of assigning the material property in the pipe properties with-in my pipe network.
Currently operating Autodesk Civil 3D 2012, AutoCAD 2012, Bentley MicroStation V8i
View 9 Replies
View Related
Sep 11, 2013
I am designing pressure pipe network for water supply line in civil 3d 2013.In that ,I am not able to insert 90 degree bends,change pipe properties know that there is default bends available in civil 3d but I need more fittings and different dia pipe. I asl know that in C:program dataAutodeskenupressure pipe fittings in that all fittings are available and SSL there is .*sqlite file available. But I Don't know to how to import this pipe fittings in civil 3d 2013.
View 3 Replies
View Related
Nov 20, 2013
Pipe network storm pipes: Fairly new to Civil3D and trying to set up parts list for the storm sewer pipe and would like the plan view to appear as it does currently. We use a polyline for centerline of pipe, similar to dashed linetype but line and space are the same, width set to pipe width.
View 1 Replies
View Related
Sep 25, 2012
I created pipe network for my storm drain project. I have located all the structures (manhole) to all angle point of my alignment as required. Also I "insert" manhole every 400' per local code requirements using the command "network layout tools; structures only. My problem is I couldn't find the tools how to trim the pipe that pass through the manhole. Please see attached pdf file.
View 1 Replies
View Related
Jan 8, 2014
One of the things I seem to struggle with is being able to depict a single pipe when it needs to be shown in one profile as a crossing pipe, and another profile where you you show a lenghwise slice through the pipe. I end up tracing the pipe with eliptical objects where I'm cutting across the pipe and setting up more for the lengthwise/sideview of the pipe. Is there a way to have two different styles for the same pipe, one for a cross cut and one for a lengthwise slice?
View 1 Replies
View Related
Nov 26, 2013
is there a way to include the pipe min/max cover as part of the str/pipe label?
Civil 3D 2013 SP1, Win 7-64 bit
12GB RAM
View 3 Replies
View Related
Jun 20, 2012
Using Network Layout Tools, can you attach a pipe to a structure in a different Pipe Network? 2013 Civil 3D
View 6 Replies
View Related
Oct 5, 2012
Where to find/import alternative material styles
egg. AISI 301? EN 1,4310?
Working white sheet metal parts an missing a lot of materials. I know how change the existing materials, but would rather import them from the web.
View 6 Replies
View Related
Jan 30, 2013
There is import button which is import column schema (xml file) from file on Bill of Material window... Is it possible to make this within API, VB Express 2010.
View 2 Replies
View Related
May 25, 2011
I opened a new 3dsMax file and Import/Merge an object in it. When I opened the "Material Editor" Window of the new file, it is empty.
How can I get the material of the merged object? Is there a way to import/merge an object and their materials as well?
View 2 Replies
View Related
Aug 29, 2012
I have a .3ds file I import
After the import it shows the differnt meshes, but underneath each mesh it has the same material name.
If i click on the material tab, it show a whole bunh of materials, but when i click them nothing gets selected, only when i click the 'default' material the whole model gets selected
is there away to change the individual mesh's materials manually,
View 2 Replies
View Related
May 26, 2013
I am usually fine with changin the materials by going to visibility settings- imports and changing the materials.
However I have a file where I cannot change the material no matter what I do. I tried importing it as a family, I tried exploding the dwg, I tried setting the layers to 'color by layer'. It is beyond me
There is another file where I can only change some layers but not the others.
View 1 Replies
View Related
Jun 21, 2012
We work with prototype buildings that can have material color variations from site to site. For example, a brick version of a prototype can have several different brick palettes from which to choose.
I'm thinking fo creating generically-named materials in the prototype set - Brick-Base and Brick-Accent, for example - with the idea that the specific material data for the function can be changed for each site-specific building.
While this certainly can be done manually, is there a way to import material data - and not just rendering appearance data but all of the data - into a model, either from another model or better yet, from some sort of data file? Ideally you would only import the materials for which you need to change the data.
View 3 Replies
View Related
Feb 24, 2014
I have a problem trying to import objects to load their correct material properties. The textures are all there but I have to reset there specular properties everytime. Even if I import the same object straight after I export it with the materials properly set, I still have to reset them all over again. Is there a setting somewhere like in Customize that I can change to make the objects maintain their properties on import?
View 4 Replies
View Related
Jun 8, 2011
I can export from Revit to 3ds, and the materials come in, but all the material links are broken. How can I import the textures in to 3ds Max? I am trying to do an architectural walkthrough, btw.
View 1 Replies
View Related
Nov 22, 2013
Setting up my first press parts list and already I'm regretting it...
How do we report material? Lower case letters spelling ductile iron is not acceptable in this office. How to I edit this to be 'DI' or anything else? I have looked in the press part catalog editor or whatever it's called and did not see a way to add to the list of all lower case materials.
Do I have to rely sole on part description for material in labels? ....and why do they still think that no one needs to use the " symbol with these parts? Freakin crashing all morning tring to get this going...
IDSP 2014
Win 7 64, Xeon ES165@3.2Ghz,
64 GB RAM, Quadro K4000 (x2)
View 2 Replies
View Related
Mar 28, 2012
Specifically to Subassembly.LinkWidthAndSlope / I only have Top or Datum options for that sub and if I assign either one in the code set it seems to overwrite all the other subassembly materials such as asphalt, curbs etc...with none set my realisic view has a gap between the back of curb and slope to existing.
Civil 3D 2012 SP1 on Win 7 64-bit SP1
Intel i7-2600kcpu @ 3.4ghz 16mb ram
ATI FirePro V4800
View 3 Replies
View Related
Sep 4, 2012
Trying to get the cut/fill quantities by computing the materials & I'm getting confused.
I imported another criteria & for ground removed it has existing as below & my datum as above. For fill, it has the datum below & existing above. The cut/fill matches a comparison between the 2 surfaces, but I just want to make sure I'm doing it right. Explain why for cut the datum's set to above & for fill it's set to below,
View 1 Replies
View Related
Oct 18, 2012
“Datum” in the “compute material”,
I’m not sure about the correct choice for the “datum” to proceed in plotting “mass haul diagram”
What might be the proper selection for the “datum”?
Software: AutoCAD 2014, AutoCAD C3D, AutoCAD M3D, Revit
Windows 7 (Ultimate 64 bits),
Firefox 20.0,
Kaspersky 2013.
View 4 Replies
View Related
Apr 23, 2013
How to get material section length with vb.net ? i need sample code with vb.net not vb.6?
View 1 Replies
View Related
Mar 3, 2013
when I import PNEZD format .csv using import wizard the coordinates get transformed. all points are shifted about 20' in northing and 5 feet in easting. I have to use the import wizard w/ survey database in order to process linework codes.
View 5 Replies
View Related
Nov 1, 2013
I created a pipe rule and applied it to my 6" HDPE pipe in my parts list. The rule is followed close but not exact. Here it is:
I created a "cover only" rule for my 6" HDPE pipe. I have the maximum and minimum cover set to 3.50'. I have it the same so it will draw my pipe 3.50' deep. I don't want it to vary. It for drawing in existing underground power so when we cut profiles and sections the existing power shows up. We want it to show up 3.50' deep. I created a label style for my pipe that tells me start cover and end cover of the pipe so I can see it right there on the screen. The numbers range from 3.50' deep to 4.70' deep.
Why does the pipe not get drawn in exactly 3.50' deep?
View 4 Replies
View Related
Dec 19, 2012
I've created sections and set up Materials List with Shapes Defined (Edit Material List.jpg) but the View Group Properties do not reflect this and have to be edited to suit.
IDSP Premium 2014 (mainly Civil 3D 2014 UKIE SP1 & Infraworks with some limited 3ds Max Design)
Win 7 Pro x64, 256Gb SSD, 300Gb 15,000 rpm HDD
16Gb Ram Intel Xeon CPU E5-1607 0 @ 3.00GHz (4 CPUs), ~3.0GHz
NVIDIA Quadro 4000, Dual 27" Monitor, Dell T3600
View 2 Replies
View Related
Mar 20, 2012
If there is any reference material out there that is useful with regards to naming conventions within Civil 3d. I am getting better at naming everything, When you have a busy drawing with lots of feature lines, alignments, assemblies, corridors etc, it can get pretty confusing sometimes.
View 1 Replies
View Related
Apr 20, 2013
When I create a new pressure network in 2014 - I have only Tees & Elbows available - Where are crosses? I need a 4-way cross at an intersection, C3D seems to include just the other two types I listed.
View 3 Replies
View Related
Jul 31, 2012
I have this block called gate valve. The base point is at the middle of the block. When I use this block as a style and insert it in profile it always places itself down low on the pipe. As you can see the grip is way above the top of the block and I have to move it into place anytime I use one. If I change the pipe inverts the gate valve block style lowers itself once again and I have to move it up into place. I have changed the base of the block but it makes no difference.
This is how the structure look in the object viewer. Notice the one on the right is the block that needs to be raised, however in the viewer it shows placed correctly.
View 7 Replies
View Related
Sep 26, 2013
Any way to label a pipe part way between structures? I would like to be able to label a sanitary line where a service ties in with the main line invert.
C3D 2013
View 7 Replies
View Related
Feb 1, 2013
My boss has designed a gravity project that has 21" PVC. Civil 3D 2010 only has 20" PVC, not 21". He basically said 21" PVC exists (JM Eagle) so make it happen. So how exactly can I add a new size to the Parts Catalog under PVC?
Windows 7 Prof w/ SP1, 64bit, Xeon 3Ghz, 16GB
Civil 3D 2013
View 1 Replies
View Related
