Can I turn off the begin and end vertical grid of a profile? Currently it can be turned off using the GRID AT VERTICAL MAJOR, even though I'm starting/ending my profile view at stations that are neither major (100') nor minor (50').
Civil 3D 2010.
I attached a pdf to show the vertical line at 19+90 that I want turned off.
If you can see it in the image below, I am showing my minor grids with a dot linetype. I have a total of 6 profiles all of which appear to have the dots double up in random areas, they also print like this.
Civil 3D 2013
HP Z400 Workstation
6GB of RAM
296GB HDD
ATI FirePro V5700(FireGL)
Win 7 Home Professional
the vertical grid is not showing up even though is turned on in view style! tried different things but nothing seems to work, and the horizontal grid doesn't clip to the profile even though i select the option! it goes way up until profile frame!
Windows 7, intel I7, 8 MB RAM, civil3d 2013.
I received a file from another office which had a split profile. The only issue that my project manager and I have with it is that the profile lines themselves run from station limit to station limit, and therefore the profile lines run through the vertical (elevation) numbers. Is there a way to adjust the vertical (elevation) grid marks to clean this up?
I've attached a picture of how it looks now.
I've attached two screenshots of my issue. I simply need to change my major station from 1000' interval to 500' interval. As you can see from the screen caps, I can manage to get the band details on the stations I want, through a workaround, but the vertical gridlines get all messed up.
Windows 7 x 64 bit
NVidia Quadro 2000 Dual Monitor
6.00 GB RAM
Intel Xeon W3550 @ 3.07 GHz
Civil 3D 2013 SP 2, Civil 3D 2012 SP2, Civil 3D 2011 V3, Civil 3D 2010 V3
Is it possible to have a profile view grid line at a Profile Vertical Geometry point?
Civil 3D 2011 & 2013
ArcGIS 10.1
I want a grid where a grid line is drawn every 10mm, with division lines every 1mm.
When I set this up in illustrator the grid lines (major) render fine but I am not seeing any division (minor) lines at all. Is this the defauld behaviour in illustrator?
How to "NOT" label the top elevation in a profile view? (see attached pic)
I can live with the far right and left vertical labels if I could turn the top elevation off.
Civil3D 2014 SP1
Win 7 Professional - 64-bit
HP Z400
Xeon W3550 @ 3.07Ghz
24GB of RAM
Nvidia GeForce GTX 760
Seems like a bug on Autocad Civil 3D 2013. I followed all the tutorials to design a circular vertical curve on a profile and it just dont work. I put circular on settings, click on circular curve by PVI button, the software even ask the radius and it end up designing a parabolic curve.
View 2 Replies View RelatedI just created a profile by choosing my PVIs and linking them together with tangent curves. How do I add labels to show the vertical curve properties (K value, curve length, station of PVI, elevation of PVI...)? I'm guessing I have to edit the label style?
View 2 Replies View RelatedI did a grading, created surface with it and draw a profile view. Everything seems to be good, except with the vertical geometry band. I need to fix slope and length only at break point, means PI (blue line), but aligment has created more PI with each surface tringular line at intersection (us i note). Is there any why to specify PI only at a break points?
I can erase PI manually on static profile view mode, but i desire to do it in dynamic mode..., in case when conditions changes.
I am working on a corridor. I have a proposal profile, and now i wanted to add a vertial curve between the new profile and exsiting. (see attached.) but i have not done before.
View 4 Replies View RelatedWhen making a profile the actual scale of the profile does not match the vertical text. The scale is 1"=40' hor and 1"=4' ver with a 10:1 exageration.
See sketch below
When I make profile sheets the vertical scale (text) if off by 4' (below). I checked all the settings and they appear to be correct. When I make a profile the scale is correctly shown.
View 1 Replies View RelatedHow do i correct the veritical profile for a given vertical gradient of 1 in 150 of 1200 etc and so on.
View 3 Replies View RelatedHow I have come to this question is through the process of trying to realistically show a hydrant in profile view. First off it it possible to create a completely vertical pipe in C3D? Also if you can, is it possible to show that in profile view? Basically, what I am trying to avoid is representing a fire hydrant pipe by creating some sort of custom cyclinder part in partbuilder. I have done this, but do not like the results.
Civil 3D 2013 SP2 | Win 7 64-bit SP1
Intel Core i5-2500 @ 3.30GHz, 8GB Ram | ATI Radeon HD 5450
Is there a way to get the vertical scale property of a profile view and not use COM?
View 4 Replies View RelatedOn our road profiles, we have to show that low points and high points are adjusted to maintain a minimum of 0.6%. see attached screen shot. Currently, I am calculating the adjusted low point and editing the profile label. Since I can't figure out how to edit one label in a data band, I've been wiping out the old elevation and typing in the new elevation over it.
Is there a way to get C3D to do the calculation for me and populate the labels with the adjusted elevation?
Civil3D 2013
Windows 7
I'm creating finished roadway profiles by setting the PVIs then going back and inserting vertical curves (Free Vertical Parabola, PVI Based). When I insert the vertical curve, it displays as 1-5 tangents depending on length (not a smooth parabola). I've changed the curve tessellation distance under the Edit Profile Style - Design tab, but it doesn't smooth it out. What am I missing here. I don't have this problem in other drawings and I'm using the same template/drawing settings.
View 2 Replies View RelatedI have a large scale industrial project with multiple road profiles and sections sheets. I find that when I plot my drawings manually by opening the drawing everything comes out fine. But when I publish the drawings manually or thru Sheet Set Manager, it shifts my vertical curve labels on my profiles down, which then conflicts with the profile linework (see attached image). Unfortunately manually plotting these drawings is not an option. Because of the amount of information in each drawing it takes 3-4 mins to open and we have 200+ drawings in a single set of drawings, which we have multiple sets of drawings for the project.
View 2 Replies View RelatedHow do I turn off the elevation grid in the section editor when looking at the cross-sections of my corridor?
View 1 Replies View RelatedWhen I open my profile file in civil 3d 2014 the grid disappears so I regenerate it and they are back. The problem I am having is when I run my cursor over the grid, it will give me a fatal error.
View 5 Replies View RelatedI am setting up plans and profiles for utilities. Most of the profiles are working fine. I have one that the horizontal grids stick out about 50 feet left of the profile view. why one is squirrely and the other are good.
I'm using C3D 2012 on 64 bit system.
I have the profiles grid to display as my company has displayed them for several years and it worked perfect in 2009. Then we switched to 2011 and now the grid is overlapping back on itself (see attached).
I am working with my reseller and I have done everything that I can think of to get this to not show with no luck. This needs to be fixed by Autodesk in my opinion since we pay for the product to work and it did before. This is apparently an issue in 2012 as well.
How to get it back to the way it was before?
Im currently having problems with my profiles showing vertical curve data on a superimposed profile. The data shows on the normal profile however when i superimpose it to another profile i cant get the program to show it.
View 4 Replies View RelatedWhen I create a profile, then explode it, none of the text or lines are bylayer. My company wants everything to be bylayer. I can't figure out which style controls the profile to make everything bylayer after it is exploded.
View 2 Replies View RelatedI created a road centerline profile and corridor and then created a profile of the two curb lines from the corridor. The road profile that I made has a vertical curve in it but the curb profiles do not show that information, just grade breaks every 25 feet based on the corridor sampling distance.
I would like to have the vertical curve information on the curb profiles.
Im having an issue where the horizontal grid lines in my profile are projecting out past my last specified station (see attached) My profile begins at sta: 1+00 and ends at 1+12. My user specified station range is sta: 0+80 to 1+30. I didn't have this issue in release 11 (im currently using release 12) with this profile view style and i did hundreds of profiles with this very same style.
AutoCAD Civil3D R12 SP2
Windows 7 Pro 64 bit
Intel Core i7-2600 3.4GHz
8.0 GB RAM
Nvidia Quadro 600
I want to create a stroke profile with a modified brush stroke. Is that possible? Or do I have to begin with a shape?This is what I am trying to assign, but the option to save as a variable width profile is greyed out.
View 3 Replies View RelatedAfter upgrading from 2013 to 2014 we have a few drawings that had profiles created in 2013 and now when we open the drawing in 2014 the profile view disappears and so we regen and then we get a fatal error. I ran an audit and there are no errors, I re-sycronized the surfaces, i also ran an audit on all the xreferences.
View 1 Replies View RelatedWe are having an issue with profile grid shooting off to the left of 0+00 rather than starting at 0+00 and stopping at the end of the profile. There is nothing in the settings that I can find that is telling the grid to extend close to 2000' to the left. Three of the four profiles are doing this. One of them displays correctly, but there are no differences that we can find in the settings.
View 7 Replies View Related