AutoCAD Civil 3D :: Temporary File (As XREF) Slows Drawing
May 9, 2013
I'm working on a rather large subdivision (not uncommon, certainly used to a longer-than-normal load time) but have found one of our XREF files to be bringing drawing loads to a screeching halt. We have XLOADCTL set to 2, which explains the creation of the temporary file.
I have previously gone into the file and reset the scale list, which speed things up by about 50%, but today it appears to be doing the same thing.
Is there anything I can do to prevent this from becoming a more serious problem? Can I add some sort of SCALELISTEDIT reset command to the acaddoc.lsp file?
Civil 3D 2014
Windows 7 Professional
Intel Xeon E31270 @ 3.4 GHz
8 GB, 64-bit
View 2 Replies
ADVERTISEMENT
Jan 30, 2013
I'm trying to get just the filename either with or without the .dwg extension for an xref given I already have its reference (BlockReference) and its model space (BlockTableRecord) all open for read; skipping accessing any BlockTable.
Im doing something like this:
Either get the XGraph and first node or prompt user for a block reference and check it's from attachmentStart active document's database transaction, get the BlockReference.Get the BlockTableRecord only with the BlockReference's BlockTableRecord-ObjectId property.At this point I can iterate through the model space and see the nuts and bolts of the xref drawing without actually changing anything after saving my drawing, even after committing a trasaction.So what I want to know is how to get the filename of the xref'ed drawing (i.e. Original_Drawing.dwg).
I'm looking at doing this without opening the referenced drawing as a side database and checking the filename.I can't debug right now, but is it. myBlockTableRecord.Database.OriginalFileName ?
View 1 Replies
View Related
Jun 19, 2013
Is there a way to toggle visibility of a corridor in a drawing where the model has been Xref'd into? The problem I am having is that we have one Model drawing that has a corridor.This Model is xref'd into multiple drawings. Not all drawings should show the corridor.
The only way I have found so far is to go into model and toggle the corridor on and off depending on which drawing I want to print or view. It creates problems when you want to run a Publish of multiple drawings because you always have to goof with the Model file. This seems a bit of a step back from being able to toggle visibility of objects in a drawing file with an xref atached and leaving it that way and ready to be printed at any time.
View 4 Replies
View Related
Nov 4, 2013
I’m having a user profile issue on one computer. I have a user, using windows 7 and AutoCAD Civil 3D 2014 on his work station. When using Civil 3D he has two issues: one, he cannot import Dgn’s. I’ve tried everything it just won’t work. Second, he cannot xref or insert PDF’s into a drawing. Now the reason why I say this is a profile issue is because if I log on to his computer (or anyone else log’s on his computer), I can do all those things in Civil 3D, import DGN’s & insert/xref PDF’s. If this user log’s on my computer, he can do all those things in Civil 3D. Import DGN’s & insert/xref PDF’s. Something with his profile on his computer is corrupt and I’m trying to fix it without deleting and creating another user profile.
View 5 Replies
View Related
Jul 30, 2012
How to do this?
Civil 3D 2012 SP2
View 9 Replies
View Related
Nov 28, 2012
I am trying to xref a base drawing. But everytime I insert the drawing, the scale factor always comes up to be 12. I tried changing it, but it won't let me. I have attached an image of the problem I am getting.
View 1 Replies
View Related
May 7, 2013
I am trying to XREF my C3D Design file that has my profiles and sections in it into a drawing with a title block and viewport. Everything is fine in Model Space...but when I create the viewport in Paper Space none of the annotative text of the profile/section shows up...or is microscopic.
View 8 Replies
View Related
Oct 12, 2012
idsObjEntity-->collection of xref objects
private void CloneObjectIds(ObjectIdCollection idsObjEntity, String strFileName)
{
try
{
Database dbNew = new Database(true, false);
Autodesk.AutoCAD.DatabaseServices.TransactionManager tm = dbNew.TransactionManager;
[code].........
here i take the object id collection as xref filter by its layer name.i tried to clone the object in new dwg its shows Wrong database.
View 1 Replies
View Related
Jan 31, 2013
Why do our feature lines all come in as the color white when xreffed into a drawing? Feature lines show up just fine in our topo drawing, so then we xref it into our design drawing and they all show as if the color is white when is is not in the layer properties. All other items (symbols, points, and lines) come in as the color they were drawn in the topo drawing.
View 3 Replies
View Related
Jun 24, 2013
I'm using C3D 2013. I received a survey drawing (unknown version) from a third party. I tried both xref'ing and inserting as block into my drawing and it was over 7,100' SW from my site. BUT when I copy from 0,0,0 in his drawing and paste 0,0,0 in my drawing, it lands on my site. If I xref my drawing into his drawing, it lands on his survey information. Why doesn't his drawing land on my site when I xref or insert as block?
View 6 Replies
View Related
Dec 28, 2010
I have a data-linked table (from an Excel 2007 file, 32-bit) in an Autocad 2010 drawing (64-bit, Windows 7 OS).
If the table is displayed as a single column, with table breaks off, the file will save within seconds.
If I enable table breaks, it will take at least 3-5 minutes for the drawing file to save.
I am unable to find any solution. I've tried using different table styles, different linked files/drawings, saving locally vs. on the network, headers and titles repeating vs not. The slowness is a major productivity killer.
View 3 Replies
View Related
Oct 26, 2010
I have a few problems with my autoCAD 2010 version on my new computer.When I make a few hatches, there is a possibility that my entire computer freezes and the only way out is a hard shut down of my computer.
The same problem also appeared when I tried to open a drawing direct in autoCAD or when I search the file to make an exref into the drawing.
View 7 Replies
View Related
Mar 12, 2012
I am xrefing a DGN file into my DWG file in Civil 3d 2012. When I go into Layer Manager I cannot see any of the DGN's Levele/Layers? Tell me this isn't so? Am I missing something here, how is one suppose to control Layers in the DGN when it is XREF'd into a DWG?
View 4 Replies
View Related
Apr 2, 2012
I am trying to use georectified cad file as a xref. The problem I am having is that the file doesn't place in the correct place. My file that I am working in is the same coordinate system. Is there a better way to do this? I've also tried copying and pasting, that doesn't work either.
View 6 Replies
View Related
Mar 7, 2012
We recently updated our servers and with that the path to all of our drawings. For example what was once located at W:FilesAutoCAD is now located at W:CorporateAutoCADDrawings. The problem is every time we open an old drawing for the first time we must redirect all of the xrefs to the new location. My question is, is there any way to do this automatically for all drawings when they are opened? Is there a way to tell the software to replace "FilesAutoCAD " with "CorporateAutoCADDrawings"? I'm sure others have encountered this dilemma.
View 9 Replies
View Related
Oct 4, 2010
Sometimes when I select a polyline with many vertices (extracted contour line) Civil 3D 2011 almost stops working. I have tried locking the layer, but this still slow to a crawl.
Intel Core2 Quad Q6600 @ 2.40GHz
NVidia GeoForce - 8Gigs Ram - Vista 64 bit
View 2 Replies
View Related
Jul 13, 2012
I am using C3D 2012 sp2.
I have a autocad file with MEP pipe objects (piping layout inside a building). If I start a new drawing using our company (dwt) template then xref in the cad file with the MEP objects they do not display. If I start a new drawing using one of autocads default (dwt) templates then xref in the MEP objects they display fine. My question is somewhere in our company template is a setting for MEP objects to be displayed .
View 2 Replies
View Related
Sep 24, 2013
I have an Excel file linked to a Table which has 3,400 lines. When the Table is unbroken a File Save takes 30 seconds. When the Table is broken it takes 30 Minutes to save. Makes the breaking feature for large table unusable.
View 3 Replies
View Related
Nov 15, 2013
I know that in ACAD you can use the xref manager to see where the actual file for the xref resides on your computer/server/etc. What I'm curious about is whether or not the inverse action is possible. Can you somehow access the file (not the output sheet where it's being xref-ed) and see what other files are using it as an xref?
I've come in on a project that is nearing completion and have been assigned the task of "cleaning up the project folder." Unfortunately, there are a ton of files in the different folders that are no longer in use on the final output sheets and I need to keep the ones still in use and archive the ones that are no longer needed. What I've been doing is going through those sheets and reviewing the xref manager for each sheet to see which files are actually put onto those sheets and making a physical checklist from which to organize my findings. Once the checklist is made, I then archive all the files that are no longer being used.
View 9 Replies
View Related
Apr 4, 2012
How to set civil 3d 2012 to automatically load your templete file at start-up instead of a misc. drawing file with no styles or anything.
View 2 Replies
View Related
May 5, 2013
First, I'm using Linux Mint 14 and just had to do a re-install. Since then I have the following messages when I open Gimp
"To avoid data loss, please check the location and permissions of the swap directory defined in your Preferences (currently "/home/todd/.gimp-2.8")"
and
"Could not create temporary file for '/home/todd/.gimp-2.8/gimprc': Permission denied"
I assume this isn't a good thing and would like to get it sorted out but don't know quite how. Yes I've re-installed Gimp, no change.
View 4 Replies
View Related
Sep 25, 2012
"lightroom cannot operate without a valid temporary file path" when ever I try to load lightroom.
View 1 Replies
View Related
Jun 1, 2012
At the end of the day yesterday our server crashed while I was working on a drawing and today when I tried to open the drawing I got the message 'Drawing File is Not Valid'. Is there a way to recover the drawing? I tried the recover command but I got the same message. i tried converting the BAK file and CAD did not respond.
View 2 Replies
View Related
Sep 16, 2013
We are working on a civil 3d project that was created by first bringing the data into Caice then exporting to microstation and then creating a .dwg. This file has been extremely slow and crashes all the time. Is there any way to fix the file? If we proecess our survey data in caice, what is the best way to bring the data over to civil 3d?
View 1 Replies
View Related
Nov 16, 2010
One of my users has a strange problem. While editing a drawing (opened from the network), the drawing switches to read-only when she tries to save it, and the .dwg file on the network folder from which she opened the file disappears. The lock files are still there, but the .dwg is gone. She can do a Save As, so she hasn't lost any work (yet!), but the problem has me perplexed.
This problem started when we converted her to Civil 3D 2011. At the same time we also upgraded her to Windows 7 64-bit.
I have about 20 other users on this same platform, she's the only one who's had this problem. I've done a repair install but that didn't fix it. I haven't yet done a full uninstall & reinstall, maybe that's what I should do next.
I have a network recovery bin application running on the server, but it has no record of the file being deleted.
View 9 Replies
View Related
Nov 4, 2013
I'm having problems importing points into Civil 3D 2012.I'm trying to import an ASCII file into the drawing.Files formats are P,N,E,Z,D in ASCII file and the same format is selected when I try importing.
The ASCII file has well over a 1000 points but when I import the points only the first twenty or so points import to the drawing.This seems not to be limited to this drawing.I tried to import points to a different drawing and the same thing happened.
Up to this point I have not had trouble importing points into other various drawings.Is there a button or setting that may have changed that is preventing full importation of the points?
View 5 Replies
View Related
Jul 18, 2012
I imported survey data from a file into the drawing and created a surface from the points and figures. No problem. Engineer wanted to change the datum from assumed to known. At this point all figures have been copied to a new layer flattened and changed to 2D polylines in order to hatch. Then the figures reimported. I raised all the points with the edit datum and raised the figures with edit survey figures. Surface was adjusted and tweaked. Everything was fine. I open the drawing and all the figures are back at assumed datum and the points are on the right datum. Now when I tweak the surface it uses the bogus elevations from the figures. How can I get my figures to save the adjusted elevations?
View 4 Replies
View Related
Feb 12, 2013
I have been provided survey data in the form of an XML file that I am using to build a surface. Everything is fine, except for the drawing with the surface is still referencing the XML file. What is the best method to remove this reference and have the surface fully contained in one file? Using C3D 2012.
View 2 Replies
View Related
Jul 15, 2013
A question about ex referencing. Can it be done within a drawing. In other words, can I can Xref the plan to another part of model space to then create the elevations in UCS, and then Exref the elevations from USC to a horizontal line.
This would be very useful in the sketch plan stage.
View 9 Replies
View Related
Dec 30, 2013
I received a drawing from another consultant that uses C3D 2013. When I open the drawing in C3D 2012 I get the message that it was created in a newer version of C3D so I assume he did a save as to 2010.
When I get drawings like this I copy what I need to the clipboard and paste into a new drawing (acad.dwt). This usually works fine. But in this case the drawing is almost 4 MB and contains just one arc. I purged everything I can from the drawing and it is still 3 MB.
I looked for but could not find any of the usual suspects: drawing scales, regapps, empty text objects and wipeouts. When I list "all" there is one arc in model space and 4 view ports in paper space. I did notice that there are hundreds of linetypes and text styles that cannot be purged.
I tried export to AutoCAD DWG 2010, 2007, 2004 and 2000 but that didn't work. Export to AutoCAD DWG R14 and DXF R12 both caused C3D to become unresponsive. Saveas to DWG R14 and DXF R12 caused C3D to become unresponsive.
View 9 Replies
View Related
Dec 27, 2012
I recently switched from Civil 3D 2012 to 2013 student version because when I initially installed the program I probably messed up some of the settings that I shouldn't have for my entire application. After reinstalling it, I noticed that the program seems to run just fine but the settings for the original file I'm trying to work with remain, such as label settings, linescales, etc.
I want my drawing to match the settings of new drawings when it comes to labels, scales, and anything else I might have changed. Is there a way to apply these settings to my original file? If not, is there a way to at least make sure the label styles can be reset? I don't want any changes to the settings I made to be present in my file.
View 4 Replies
View Related
