I'm setting up some computers for training some new users on Civil 3D 2011 and Im having problems with importing points and creating figure lines, works great on all the computers in the office, but in the training room can not get the figure lines to assign to the proper layers. They all go on the zero layer. All the setting I see are the same.
View 5 Replies
here's my process:
1- Import the asc file into my drawing.
2- Convert the asc file to a FBK file
3- Import my FBK file. The survey figure linework generated doesn't overlay my previously imported asc file. I checked the FBK file and the coord's match the asc file. I'm confused as to why the survey figures don't overlay the survey points from the asc file, since the coords match in both? The survey figures are all shifted .7' and 54deg. from the points. The elevations are all good on the survey figures, as they match the survey points.
So my quick fix is to explode the survey figures, since I don't really need them for what I'm doing, and then select all the 3d polylines and move them to them to an appropriate survey point. Everything then looks fine and I can get the job done.
However, I would like some insight as to why this might be happening. It's strange that the FBK and asc coordinates match, but the survey figures aren't lying over them.
I have a drawing that is about a month old with survey data and a surface in it. I went in to modify the surface and noticed a crossing breakline message that was never addressed. I attempt to do a grip edit on the survey figure that is crossing ,and update the database from drawing and I get a message saying the figure is in not in the database. I know I have the correct database, because if I select the figure in the prospector tab It highlights the one I'm working with. Somehow the objects in the drawing have lost association with the database.
Any solutions short of re-inserting all my figures from the database? I'm not going to do that in this case since the edit was small and is already done.
(running C3D 2012 sp4, Win7 64bit, 8GB)
I want to get vertex from survey figure or parcel.
I have seen this for feature line: [URL] .....
But "Autodesk.AECC.Interop.Land" doesn´t have AeccLandSurveyFigure.
How can I do it? Is it necessary convert survey figure to polyline?
Autocad Civil 3D 2014 +SP1
Quad Core Intel i7 3770-cpu 3.40Ghz.
ssd samsung 840 pro 512gb+ssd samsung 840 pro 256 gb+1tb hdd
32gb RAM 1600 Mhz.
nVidia Quadro 2000.
Win 7 Pro 64bit
what if i have points that are non-consecutive? the survey crew is new at this so i'm getting some higher number points that line work wise appear in the middle of lower number points. the figure seems to draw numerically. is there a way to do a figure by proximity?
Dell Studio XPS 9100
Intel Core i7 CPU 930 @ 2.8GHz
12GB Ram
64 bit
C3D 2012 SP3.0
I have imported surveydata into the survey database from FBK and processed linework. I do as many edits to my figures as I can by editing point codes and processing linework, then I fix the rest of the figures manually editing them and pushing the changes back to the survey database.
Once you have started manually editing figures you can no longer 'process linework' as you get double ups of figures you manually edited.
My issue is that I have made some adjustments to some of my control point coordinates after manually editing figures, so that all my survey points move. I try to update the survey figures so that they move with my points but Civil3D tells me that it cant update them because they were made by processing linework.
Is there anyway I can get my figures to match my points without reprocessing linework and then making all the manual edits again or exporting an FBK from the database, remove the figures and points from the dwg, reset the network and import the new FBK?
We should be able to update figures without processing linework, even if that was how the figures were originally made!
Civil3D 2014 - Windows7 64bit
He has a survey figure that is too short to display the text in the linestyle. When I change the linetype scale for the object, it has no effect.
View 1 Replies View RelatedI have a client who uses Bently MX Roads for road design and requires that survey data be supplied in GENIO format. I realise that there are many possible options to get Civil3D survey data into MX, but I am trying to explore the use of the Subscription Extension to Import/Export GENIO.
Surfaces - no problem. Points - I see how I can get that to work. But the only linework that can be exported is Feature Lines, and it is also important that the feature lines have a name (likely related to the layer it is on).
I can convert survey figures to feature lines and name them one by one but would be very time consuming for a whole survey. Is there any way of doing all figures at once?
I'm guessing not and that it is probably easier to do the Genio creation from dwg in MX itself.
Civil3D 2014 - Windows7 64bit
When I import points from a survey database there is a very large new number being assigned to points that have overlap/numbering conflicts.
I had some survey from one source that was in the 1000 pt # range & additional survey that was in same numbering sequence.
When importing the points I chose "Resolve all" it is renumbering the Point number value to the 5xxxxxxxx range?
Is there some setting where I can change this to a lower # or how/why this is happening?
Next Point Number value @ Settings Tab>Point>Commands>CreatePoints>Point Identity>Next Point Number = 3.
I've attached a couple of captions illustrating the issue.
2012 Civil 3D SP 2.1
Win 7
C3D 2012 SP3 & C3D 2014 SP1
Win 7 Professional 64 Bit
I've figured some things out, but am struggling with what appears to be a very valuable tool... the area tool.
I found many references to the boundary tool, but that looks more complicated.
I have figured out how to mark the corner and press enter, but the output is for example 1.7 sq ft vs. what should be approx 35K sq ft.
I tried to change the units, but that didn't seem to make a difference.
I am trying to insert an ordinance survey map into model space of an existing metric drawing.
When the map appears, it is the size of a postage stamp in relation to the existing buildings in the drawing.
Is this because the OS Survey map is drawn in meters when my drawing is in millimeters?
I copied some Survey Data of AutoCAD Civil 3D 2013 for Surveyors to my C3D 2013 machine few weeks ago. Now I cannot do the "Import point file" of the Survey2 Data B in Survey Databases, because the Survey2 Data B is locked up - see the attached file that has a red circle with an arrow on. How I can unlocked the locked Survey 2 Data in the Survey Databases.
View 1 Replies View RelatedWhy a layer state assigned to a viewport can only restrict the layers showing? I want my viewport to show the proper layers all the time, even when those layers are not visible in model space.
C3D 2012 SP2.1
WIndows 7 SP1 64 bit
24GB RAM
Dual quad core xeon 3.2ghz cpu's
Triple Monitors
Is there a way to have certain figures auto-hatch upon import?
View 1 Replies View RelatedWhen assigning a coordinate system to my drawing in Civil 3D 2013, the drawing does not retain the selected system.
I choose the coord system I want in Map Setup and apply it (in this case MT83IF). After applying to the drawing I go back to verify the selected coordinate system and the dialog box indicates "N/A". The only workaround I can find is to save the drawing back to an earlier version and open it on another computer in the office that is running 2011. There I can assign my coord system and then reopen in 2013 where it now shows it properly assigned.
I have tried other coord systems to make sure it isn't isolated to just the one I am selecting - and it happens with all others I try. I have also tried a repair on my install to see if that would correct it to no avail.
I have a 64 bit system and have installed all service packs to date.
What is the best way to insert a c3d point with assigned values. For example, I want to insert a point with the style curb stop, on a certain layer with a certain label. Going through thr insert point tool is not very user friendly for users looking to add points, not assign properties. Can this operation be added to the tool palettes? I am not familar with creating my own.
C3D 2012 or 2014
Civil 3D 2012 SP4.0 Windows 7 Enterprise 64-bit
C3D 2014 SP1
Dell M6600, Core i7 @ 2.3GHz, 16 GB ram
Dell T3500 workstation, too much ram to post
I have a volume surface that I want cut & fill displayed with elevation banding. I created a surface style and chose pastels for the color scheme. When I analyze the surface I chose elevations>> range interval with datum and I get 2d solids but they are not pastel even though the style assigned is the one I mentioned.
How do I get the colors to be pastel?
Civil 3D 2012 & 2013
HP Z210 Workstation
Intel Xeon CPU E31240 @ 3.30 Hz
12 GB Ram
How to separate layers on an image prior to printing?
View 2 Replies View RelatedIs there any way to change a Profile Type that has "File" assigned to it to"Layout"?
C3D 2012 SP3 & C3D 2014 SP1
Win 7 Professional 64 Bit
I’m a student in a land surveying program using AutoCAD Civil 3D 2012. When I try to plot my DWG to a PDF my line weights are not plotting accordingly to the layers. For instance, Layer 1 is set at 0.7mm line weight, Layer 2 is set at 0.3mm but when it plots to PDF they all look similar. I have double checked the options on the plotting screen and I can get the line weights to plot correctly on different drawings with similar settings. I’m wondering if the issue has something to do with the fact that the particular lines that are not plotting accordingly are parcel segments.
View 9 Replies View RelatedModifying the point size/text size assigned at particular annotation scale,
I’m wondering how the point size/text size assigned at particular annotation scale can be modified.
For example, in the attached screenshot, the point size assigned at the annotation scale of 1/1000 is big and I wanted to make it a bit smaller at that scale.
Software: AutoCAD 2014, AutoCAD C3D, AutoCAD M3D, Revit
Windows 7 (Ultimate 64 bits),
Firefox 20.0,
Kaspersky 2013.
We process survey data using Attributes to add extra intelligence and reduce errors.
For example, when shooting trees, the RAW file will contain something like this:
SS,OP 50,FP1299,AR308.2057,ZE91.0918,SD128.282,--TREE
FC,PN1299,FNTREE
AT,TNSZ,TV11.0
AT,TNTY,TVMAPLE
or when shooting a street sign:
SS,OP 50,FP1437,AR324.1135,ZE91.4728,SD123.235,--SIGN
FC,PN1437,FNSIGN
AT,TNTY,TVNO PARKING
The FC code sets up that attribute information will follow for the point number indicated by PN and the FN is basically explaining the name of the feature type. On the collector, this is all menu driven, making for few data entry errors.
The AT codes list the attributes name TN and then the TV reports its value.
Is there a way to preserve these attributes and their data when processing them into an FBK? Ideally, they would need to become part of a point description.
When processing this for that "other" CADD package, I am able to use these values in building labels for my survey points.
I was curious what the basic workflow is for creating an EG from a survey. The catch is that we don't have a point file or elevated points on the drawing. The drawing is just that a drawing with spot elevations and linework. The lot is 100' long and 30' wide. An existing house takes up most of the lot with a street on the front and back. The idea is to try making a grading plan after I figure this first part out. Where would I begin with something like this to figure out the next step of grading a small lot?
View 9 Replies View RelatedI was following Civil 3D 2008 Education Curriculum Module 04-Survey on how to import field books, create points and figures, insert them into the drawing, and then (per page 04-35), remove the network from the drawing.
Now I have a serious problem, and cannot add any new Networks. The "Name" and "Description" appears, but there is no place for a cursor entry.
Do I have to re-install the program?
Is there a way to have cad automatically create a survey point when a surface point is added manually?
Civil 3D 2013
Windows 7 64-bit
Inteel 2.40 GHz 8 GB RAM
Dell T7600
i have a point file specifically a PNEZD file. when i import points into the survey database the coordinate in the database is correct but the coordinate on the drawing tends to be 5 feet off one way and 1 foot off the other. When I import point through the points pull-down menu the coordinates are correctly shown. When I import point into survey database from drawing the coordinate is incorrect in the database but correct on screen.
View 3 Replies View RelatedWe need to move a survey point. I know the point can be unlocked in the drawing and moved, but how can the survey database be updated? After the point is moved the database does not update even after closing and reopening the dwg and database.
View 5 Replies View RelatedMy company has upgraded to new computers recently (Windows 7, Civil 3d 2012). Some of the new computers are unable to access ANY survey database for edit. They can be opened read only, but the option of opening for edit isn't even available. The old computers we have CAN open the same databases for edit. We have attempted repairing/reinstalling, but to no avail. All the new computers were cloned from 1 original.
View 2 Replies View RelatedI'm exploring the option of going from normal autocad and PDS (for our road designs) to fully using Civil 3D 2013.
Generally we only recieve a survey drawing as a 2d cad file with height points represented as 2d text.
In PDS all we need do is 'convert text to point' and create a ground model, this gives us a 3d ground mesh to work with.
In Civil 3d i've found 'movetexttoelevation' but now i'm stuck with adding a point at the node of the text object, and then I need to creat a surface model to overlay a 2d siteplan andstart creating our roads.
I am bringing in the points by importing survey data because I don't want anyone to be able to edit the point data.
Vive noticed that they can be erased and that you can explode them.
Are there any issues with coping a survey database to different directory?
View 3 Replies View Related
