AutoCAD Civil 3D :: Importing Survey Data
Oct 21, 2012I am bringing in the points by importing survey data because I don't want anyone to be able to edit the point data.
Vive noticed that they can be erased and that you can explode them.
ADVERTISEMENT
AutoCAD Civil 3D :: How To Unlock The Locked Survey Data In Survey Databases
Nov 19, 2013I copied some Survey Data of AutoCAD Civil 3D 2013 for Surveyors to my C3D 2013 machine few weeks ago. Now I cannot do the "Import point file" of the Survey2 Data B in Survey Databases, because the Survey2 Data B is locked up - see the attached file that has a red circle with an arrow on. How I can unlocked the locked Survey 2 Data in the Survey Databases.
View 1 Replies View RelatedAutoCAD Civil 3D :: Importing Points Under Prospector Or Survey Tab
Apr 12, 2012I was wondering what is the difference between importing points under the Prospector tab versus importing points under the Suvey tab? And how either of the two methods relate to using Data Shortcut?
I would like to create a survey topo drawing that contains points and surface information which other Design drawings that are attached to the Data Shortcut project can access but not be able to make any changes to the original points and existing surface information.
AutoCAD Civil 3D :: Survey Database Point Data
Apr 16, 2012Is there a way to "data shortcut" information imported from a data file into multiple drawings? If so, is there a way to lock the data points "in place" and not be able to adjust the point location/elevation, but allow the movement the text information around within the drawing.
The goal is to have multiple drawings with these data points and be able to move the text information from the style, but not (in a million years) be able to move the data point itself. There may be multiple drawings with these points located within them.
AutoCAD Civil 3D :: Adding Survey Data To A Surface
Dec 16, 2013I am using AC3D 2014. I have created a surface from downloaded DEM points, but, as expected, the contours are not as accurate as I would like. They vary from known elevations anywhere from a few inches to several feet.
I also have survey data from approximately 500 points which include Northings, Eastings and Elevations. Is there a way to add these points to my existing contour surface and incorporate these know NEZ points such that he contour surface is more accurate?
I have already converted my "known point" file to a .txt format with comma delimited information.
AutoCAD Civil 3D :: Survey Point Extended Data
Jul 5, 2012I am wondering if it's possible to have a point code automatically add data to a user-defined field either in the survey database or in a drawing. For instance, our surveyors currently will code a catch basin as CB INV2.2 if it has an invert depth of 2.2'. I have a survey point user-defined property called InvertDepth. Is it possible to get the survey database to automatically add 2.2 to that user-defined property or does that have to be manually input? I have an expression and a label style that will take the elevation shot and subtract the depth number to give me the invert elevation on a lable, but I'd like to see if this can be done automatically without having to manually type in the depth on every point that is a catch basin or other inlet.
I've looked into the description key-set's parameters, but they seem to be mostly for display purposes and writing a full description.
AutoCAD Civil 3D :: Survey Data Collection Link?
Jan 7, 2013We recently tried to convert a RAW data file to FBK and the program aborted after running several setups. I have viewed the raw data on the data collector, but there appears to be no error. What other methods of conversion could I use to convert the RAW data file to a TXT file? I was hoping that our local AutoCad/Topcon dealer would be able to have a work-around, but they seemed stumped too. We have never encountered a problem usitlizing the Survey data Collection Link with any of our traverses prior to this time.
View 3 Replies View RelatedAutoCAD Civil 3D :: How To Create Polylines Using Survey Data
Feb 15, 2013I want to create a road map using the survey data. Iv'e got some examples attached below.
How to create such type of drawings in autocad civil 3d.
AutoCAD Civil 3D :: Survey Data From A File Into The Drawing
Jul 18, 2012I imported survey data from a file into the drawing and created a surface from the points and figures. No problem. Engineer wanted to change the datum from assumed to known. At this point all figures have been copied to a new layer flattened and changed to 2D polylines in order to hatch. Then the figures reimported. I raised all the points with the edit datum and raised the figures with edit survey figures. Surface was adjusted and tweaked. Everything was fine. I open the drawing and all the figures are back at assumed datum and the points are on the right datum. Now when I tweak the surface it uses the bogus elevations from the figures. How can I get my figures to save the adjusted elevations?
View 4 Replies View RelatedAutoCAD Civil 3D :: Point Group When Importing Survey Points?
May 23, 2013Sometimes when i import points Civil 3d creates a Point group in the drawing with the name of the point file, sometime it does not. I prefer when it does create this point group. It always seems to create a Survey Point Group. How do i control wether or not a point group is created in the import?
Civil 3D 2013
HP Z400 Workstation
6GB of RAM
296GB HDD
ATI FirePro V5700(FireGL)
Win 7 Home Professional
AutoCAD Civil 3D :: Survey Data Collection Link Error
Aug 2, 2013We use Survey Data Collection Link to convert our file formats, in this case it is a GPS job exported from a TSC2 using Trimble Survey Controller Version 12.46. I exported the job from the data collector as a .csv file then use SDCL to convert the .csv into a .fbk file. I am getting this error saying the file is invalid or in use. We ran into this problem a couple months ago and it disappeared after a couple days, and now it has resurfaced.
Running Autocad Civil 3d 2012 with Service Pack 2, Windows 7 64-bit OS.
AutoCAD Civil 3D :: Local Survey Data To Global Coordinates?
Oct 17, 2012What I have is northing/easting survey data starting at an arbitrary point. The rest of the points are measured from that.
I do know the global coordinate of the base point, but no other points.
My question is how can I take all of the points and create gloabl coordinates out of them. I assume this is possible because I know the global coordiane of our reference point, I just have no clue how to do it in CAD.
AutoCAD Civil 3D :: Creating Existing Profile From Survey Data
Nov 14, 2013I am fairly new to the Civil side of AutoCAD, as I used to work primarily in Map. I am working on a street rehab project in which I need to take survey points showing existing elevations (centerline, flowline, and top of curb) and show existing profiles in a profile view. I have no problems setting up the profile view(s) or the centerline alignment, but I am having problems with creating the profiles themselves, and I have a two part question about them
Question 1: According to the user's guide, the correct way to set up an "existing" profile is by extracting it from a surface, but I don't have a surface to use. In reading through the various profile types, the best way to set up what I want seems to be by using the profile layout tools, but the help says that a profile layout is supposed to be for a final "proposed" profile, not the existing. Does this actually matter? Will I be breaking Civil functionality by creating an existing profile using the profile layout tools?
Question 2: In reading through the profile layout tools, everything seems to be centered around PVI's. Even using the "tangent tangent" method to add in points seems to only use the first and last point as controls, with everything in between treated as a PVI. If you look at the documentation here, points one and four are treated as actual elevations, while curvature occurs at points 2 and 3. In my case, since what I have is a series of actual points on a surface, each point should be an actual surface elevation with curvature occurring between points and not at them. What method should I be using to input the points in the profile?
AutoCAD Civil 3D :: Survey Database And Data Shortcut Path
Feb 15, 2013How do you move a survey database and data shortcuts? Without going into details, sometimes it is necessary to copy portion of projects as new projects. The survey database along with the drawings our surface, points, linework, etc. need to reference the new directory. I can set the survey database folder location to the new path but am not certain the information in the dwg is point to the correct location.
The same essentially applies to the data shortcuts. I'm having trouble getting this to work. With LD we were able to copy the project and resuscitate the drawing(s). I tried to use Data Shortcut Editor with the Saveas. I then attempted to rename the dwg's and path the new location and name but receive an error of Invalid source file. Correct the path or press Esc..
AutoCAD Civil 3D :: Survey Points Disappear After Importing Field Books
Feb 7, 2013I’ve run into an issue with importing survey data using field books.
I started by importing my primary control using a field book. There were no issues with importing these points. I then proceeded to import subsequent field books with additional control and then topographic mapping. In the last field book some points were accidentally overwritten due to an error in the field collection. No error message was given to let me know the survey points were in use and being overwritten. Luckily I caught the error before I proceeded to the next field book.
I tried to reimport the field book that originally created the points that were overwritten. At that point C3D told me that the points being occupied in the field book did not exist. I checked the point list for the primary control field book under the "Import Events" in the Survey Tab of the Toolspace and indeed the points in question were no longer listed.
I then proceeded to reimport all the field books in order, starting with the primary control. I got through several of field books before C3D again told me the point being occupied did not exist. This despite the fact that this same point was occupied in previous field books. After trying once again I was able to get through the field books.
AutoCAD Civil 3D :: Label Survey Data With User Defined Properties
Jul 3, 2012i am following the new feature of CIVIL3D 2013. i have some problems with making user defined properties.
when i make a lable style for figure, lable style should be selected.
But i don't know how to make a properties for text of lable style.
see image below. i select the add labels of annotate ribon -> figur -> add figure labels -> edit section of line label style -> layout tap -> contents below text -> you can see the owership which is user defined properties.how to make that properties?
AutoCAD Civil 3D :: Import Survey Data Using TXT File - Comment Line Out
Aug 20, 2012I am importing survey data using a .txt file. In that file there are a few lines that I don't want C3D to read. Is there some character I can put at the beginning of the line so that it won't read or give me an error? In some other programs I have seen # or : used to do this.
C3D 2012 sp1
W7Pro 64bit
HP Z400 Workstation
16 GB RAM
Intel Xeon CPU W3565@3.20GHz
NVIDIA Quadro 4000
AutoCAD Civil 3D :: Transfer Data With Sanding Total Station In Survey Menu
Nov 9, 2012i need to guide for using sanding total station for exchange data now my question is that do there is any way in civil 3d survey menu that i can use sanding total station for exchange data?
View 1 Replies View RelatedAutoCAD Civil 3D :: Import Survey Data Default Point Group Styles
May 3, 2012When you use the Import Survey Data wizard it automatically creates a point group that goes to the top of the list. This used to be created with a standard point style and description, but something has changed and I'm getting a different symbol and label that I definitely don't want as the default. I would think that this would be controled by the CreatePointGroup settings, but that isn't working for me. I can't find any other settings that would override or control this.
(running C3D 2012 sp4, Win7 64bit, 8GB)
AutoCAD Civil 3D :: Importing GIS Data
Feb 10, 2011I'm working in C3D 2009 and I have received some GIS data files that I would like to import. I don't work with GIS files in my daily work so I am not familiar with them. Although I have an idea of what kind of information can be stored in the GIS files. I've managed to get the data into my drawing using mapimport, but how do I know that I have successfully inserted all of the information that was sent to me?
I was given shx, shp, dbf, idx, prj, sbn, sbx, and xml files. All I have in my drawing are polylines that have a little bit of extra information when the properties box is displayed. It just seems like a lot of files to be sent to only receive a polyline. Although all of the files except the shp files have only 1kb file sizes, and the shp file is 400 kb. So perhaps I was just sent extra files?
AutoCAD Civil 3D :: Importing GIS Data For Inlets
Jan 7, 2013I see you can import junctions from GIS shapefiles, but can you import inlets? I have hundreds of inlets (mostly grate inlets) and I need to import the inlet type and inlet opening dimensions. I have a shap file with the inlet data, but I'm unable to import it into SSA with all the information I need.
I know you can import shapefiles as junctions and convert them to inlets, but then you would have to manually input the dimensions of the inlet. Is it possible for SSA to automate this processs?
AutoCAD Civil 3D :: Importing Data From Two Sources
Feb 18, 2013I am having problem importing data from two different source. The first one is hypso data and is supposed to be in lat / long from the CSRS. When I import the shape file in C3D using these specification, the white arrow appears in the center of the drawing, and everything seems fine.
Now then, I have those data point from land survey with a GPS I wish to had to my surface. When I import my text file ( which is in P - X - Y - Z format ), the point appears way offside of the hypso drawing.
So I was wondering, how can I know the system in which those point were recorded. Once I know this, how can I specify to C3D that the hypso is in a certain system, and the GPS point in another one, so that they will come together ?
AutoCAD Civil 3D :: Importing (Not Data Referencing) Profile
Jun 15, 2012I want to create a live instance of an existing FG-Profile that I somebody else did into our master profile drawing. Is there an easy way to do this? I don't want to data reference it in.
I tried exporting the FG-Profile information into a .txt file and then use the "create a profile from file", but for whatever reason C3D didn't like my profile info was giving me an error message.
AutoCad :: Importing Point Data From Excel To Civil 3D?
Jul 4, 2013I have an excel sheet containing alignment coordinates i.e
Station Number
Northings
Eastings and
Tangential Direction
I wanted to export these into Civil 3d so that I can work with the info. What format would I save my excel document? is it 'text (tab delimited)' or 'csv (comma delimited) or formatted text (space delimited)?
I've tried all the above but I keep getting an error message from AutoCAD that point files not in right format
NB: Am using MS Office 2010
AutoCAD Civil 3D :: Survey Figures Don't Match Survey Points
May 3, 2012here's my process:
1- Import the asc file into my drawing.
2- Convert the asc file to a FBK file
3- Import my FBK file. The survey figure linework generated doesn't overlay my previously imported asc file. I checked the FBK file and the coord's match the asc file. I'm confused as to why the survey figures don't overlay the survey points from the asc file, since the coords match in both? The survey figures are all shifted .7' and 54deg. from the points. The elevations are all good on the survey figures, as they match the survey points.
So my quick fix is to explode the survey figures, since I don't really need them for what I'm doing, and then select all the 3d polylines and move them to them to an appropriate survey point. Everything then looks fine and I can get the job done.
However, I would like some insight as to why this might be happening. It's strange that the FBK and asc coordinates match, but the survey figures aren't lying over them.
AutoCAD Civil 3D :: Importing SHP Data Always Creates A Pipe Network
Oct 16, 2013I want to import a number of SHP files into Civil 3D for design - road centrelines, boundaries, creek centrelines, etc. however when I import them into Civil 3D (_AeccImportGISData) it only allows me to create a Pipe network. the dialog that opens automatically assumes I want to import a pipe network.
Is there another way to import this information without assigning parts.
AutoCAD Civil 3D :: Importing MX Highway Design - Pull Out Long And Cross Sections Based On Data
Feb 28, 2012I'm having some problems using some existing MX highway design data I've brought into Civil3D using the genio import extension. Basically I can bring in all the alignments that I want to be able to use but am unsure where to go next in terms of creating a proposed profile line. My goal is to be able to pull out long sections and cross sections based on this data. Ideally I'd like to avoid doubling up on work in MX and Civil3D as much as possible.
View 2 Replies View RelatedAutoCAD Map 3D :: Importing Survey Points With Numbers
May 3, 2012How can I import survey points in AutoCAD Map. The points are stuctured like this (point number, easting, northing, altitude).
View 7 Replies View RelatedAutoCad 3D :: Creating 3D Model From X / Y / Z Survey Data
Sep 6, 2012I am a land surveyor using AutoCAD 2012. Just new to 2012 version, previously used 2005 version.
My question is:
Is it possible to (and how do I) create a 3D model of a ground surface from field survey data which has been collected. The data i have is currently in Leica GSI format, and has x, y and z coordinates. I can easily transfer this into a .csv file i necessary.
AutoCad :: Make Topographic Map From Survey Data?
Jul 29, 2013I would like to try to make topographic map from survey data, however my data is in excel format. Can i import the data in autocad? I'm using autoCAD 2014 trial.
View 9 Replies View RelatedAutoCad :: Plotting Survey Drawing With Field Data In Text Format
Feb 13, 2012How to plot a survey drawing with field data in text format, (using Autocad 2008, so that the point number and XYZ coordinates appear on the drawing.
View 1 Replies View Related