I'm using C3D 09 with all the updates. OK, now that those are addressed, I am having an issue with my pipe hatching dissappearing when I connect it to a structure. See the two attached pics for clarity.
View 4 RepliesPipe network storm pipes: Fairly new to Civil3D and trying to set up parts list for the storm sewer pipe and would like the plan view to appear as it does currently. We use a polyline for centerline of pipe, similar to dashed linetype but line and space are the same, width set to pipe width.
View 1 Replies View RelatedI created pipe network for my storm drain project. I have located all the structures (manhole) to all angle point of my alignment as required. Also I "insert" manhole every 400' per local code requirements using the command "network layout tools; structures only. My problem is I couldn't find the tools how to trim the pipe that pass through the manhole. Please see attached pdf file.
View 1 Replies View RelatedOne of the things I seem to struggle with is being able to depict a single pipe when it needs to be shown in one profile as a crossing pipe, and another profile where you you show a lenghwise slice through the pipe. I end up tracing the pipe with eliptical objects where I'm cutting across the pipe and setting up more for the lengthwise/sideview of the pipe. Is there a way to have two different styles for the same pipe, one for a cross cut and one for a lengthwise slice?
View 1 Replies View Relatedis there a way to include the pipe min/max cover as part of the str/pipe label?
Civil 3D 2013 SP1, Win 7-64 bit
12GB RAM
Using Network Layout Tools, can you attach a pipe to a structure in a different Pipe Network? 2013 Civil 3D
View 6 Replies View RelatedIs it possible to change the cut and fill pattern from solid bands of colour to bands of colour cross hatch (for example)? The reason for this is, when printing the drawing uses a lot of ink.
View 8 Replies View RelatedI have a surface made out of 3Dfaces as shown in the .jpg attachment i added. I would like to have it hatched. What are my options?
I use Civil 2012 and have experience with AutoCAD plain, but only try to learn Civil 3D at the moment.
I discovered a weird thing that seems like a bug...I tried to hatch manually while in profile view (couldn't figure out how to do what I want with the profile view hatching options) and it seems that if I try to make one hatch (by picking internal points) that includes multiple structure profiles on the same profile view, the first structure profile for that profile view works as a hatch boundary, but subsequent structure profiles are basically ignored if I keep trying to pick internal points to make a composite hatch.
I assume it's because of this same bug that I can't create a hatch by choosing boundary objects and using two structure profiles in the same profile view as boundary objects.
how to hatch using the profile view hatching and to use a pipe network as a boundary, that would also be useful.
if I hatch by picking internal points, and pick one area with a structure profile as part of the boundary, and then I pick a similar area in a different profile view, everything works fine...it's just the second (and though I don't have more than 2 structures per profile view in my drawing, I would assume any subsequent) structure profiles that I try to use as hatch boundaries that AutoCAD is basically ignoring.
Is there a way for C3D 2013 to automatically hatch (with a style) in the profile view the area from the FG to top of pipes (Sanitary, Storm or Water). Currently we go old school with isolating the linework in the profile and hatching it manually. The interesting thing is the hatch still recognizes the grid in the profile view even though we've frozen the grid and other linework. AND we must put a line on the top of the pipe, or the hatching goes to the next "grid" of the profile.
Would be nice to get it to generate the hatch much the same way it does for the profile view with Cut area or Fill area or Multi boundaries.
I am using AutoCAD Civil 3D 2012 and Adobe X Pro. When I print to PDF (using plotter DWG to PDF) the hatching for the slopes analysis does not show up. I have other hatching in the plan and that shows up, along with the outline for the slopes. Its just the actually slope hatching that doesn't show up.
View 2 Replies View RelatedI have searched the Help fine in Civil 3D, I have searched the tutorials and Knowledge Base online, I have searched the Mastering AutoCAD Civil 3D manual, and I can not fine how to turn on hatching in Section Views. I'm currently running Civil 3D 2013.
View 5 Replies View RelatedI am trying to show cut and fill hatching in the profile views but the hatching doesn't show up. I've tried changing the hatching styles, the scale, the colors, etc. but it doesn't seem to be working.
View 4 Replies View RelatedIs there a way to create hatching for the slopes surface style instead of using solid colors?
View 2 Replies View RelatedMy Coworker has an issue with dimensions disappearing while she is working on completing her drawing. We have tried using Audit..did not work, we thought it was maybe the anno visible tab did not work. She thinks that she did nothing out of the ordinary while working on the drawing. See attached drawing. The drawing is after all but a couple dimensions have disapperaed.
View 3 Replies View RelatedI am drawing a pond levy. I draw the outline of the top of the fill, set that at the elevation I want, then grade it down to the existing surface on a 6:1. The grading works perfectly. The outline of the fill's footprint shows up just fine around the back of the fill, but the toe line doesn't show up all along the front side of the fill, but I still get the slope lines projecting down in the front.
View 8 Replies View RelatedWe are using C3D 2013 and have recently had 3 different episodes where a dwg file was open and being worked in, CAD shut down without warning and the drawing was lost. As in, it's gone. No longer on the network anywhere. These were 3 different drawings in different projects.The drawings were not new, they had been previously created and worked in by more than one user. We were able to find a backup file and did not lose everything but still thinking there has to be something causing this. The machine is a Dell Precision T5600, 16 GB of RAM, only had it for a few months.
View 9 Replies View Relatedacad c3d 2013
My sag and Crest profile labels disappear when opening the drawing.
Over the past 6 months we have had the feature lines just up and disappear from the drawing for no reason. They were not erased. They just went away for some reason but the surface created from them was still there.
View 9 Replies View RelatedI have a couple of files with DS surfaces that I cut profiles with and all was fine until today. the surface ref is in the drawing but does not display. If I zoom to it goes to a location not related to the site but there is no display of the surface (all layers and style set to display) this is what view props shows. notice the odd serial number for the data source. through tools space I deleted the refs and re-refed and sampled, but when I close and go back its gone again.
Civil 3D 2012 & 2013
HP Z210 Workstation
Intel Xeon CPU E31240 @ 3.30 Hz
12 GB Ram
I’m having some issues with my CAD. Every now and then, my contour lines disappear and I can’t get them to reappear. My surface border and triangles will appear but not the contours. Sometimes if I change surface styles they will appear but other times they are gone forever.
Troubleshooting: Regen AllAuditPurgeLayers on/offLayers frozen/thawedPromoting (if the surface is a data short cut)Changing the surface styleChanging the contour interval
None of this has worked…
AUTOCAD Civil 3D 2013
Windows 7
Processor: Intel (R) Xeon (R) CPU W3565 @ 3.20GHz
Installed Memory (RAM): 12.0GB
System Type: 64-bit
I'm trying to get a handle on what should and should not be expected to work as far as labeling XREF'd entities goes. I'm using 2011.
I have recently had bearing notes associated with an XREF'd line disappear, and I can't pinpoint the cause.
I had edited a couple of lines in said XREF'd drawing, but NOT the one that was associated with the C3D notes. There are two C3D drawings that XREF this drawing and that have line labels applied to the same, unchanged, line. Yet, all of those labels were gone (in both drawings) when I opened them this morning.
So, should labeling an XREF'd entity work? Are labels predictably lost when a labeled line undergoes a known set of modifications (Sinc relayed his experiences here: [URL] .....
What if the XREF'd drawing is simply saved, with no changes made to a labeled line? Should that be okay?
If labeling XREF's is known to be unpredictable, it sort of puts us back to manual text labels and manual curve tables. Is that really what people are having to do?
Using Civil 3D 2011, I have a topo drawing that's about 2 miles long. The points have styles to them to show the actual survey item such as manhole, trees, signs, etc. I have also created a point group called "no display" that I have added certain points to so they don't show up in the topo. While adding additional points to the "no display" point group, I have noticed that ALL the points but 3 have vanished from the drawing.We just installed the SP2.
View 9 Replies View RelatedI am running 2012 C3d and I am having an issue when a drawing is freshly opened, some of the profile data is not showing and it will show up after I sync the different information that is missing.when I run a publish of multiple projects that info doesn't show and I have to go into each project to sync the info and plot each sheet separately.
View 6 Replies View RelatedMy Civil 3D 2012 coordinate systems normally displayed on the units and zone tab of the drawing settings have disappeared. On existing drawings the coordinate system code is still displayed. On new drawings the code appears as a symbol - a period or a comma or something. I can enter the coordinate system code and the program recognizes it.
My Civil 3D 2011 coordinate systems display as expected.
WP7,SP1, 64-bit, Civil 3D 2012
I have a problem in Civil3d 2013 where at random I'll open up a drawing that previously had a point table created and all the point information has disappeared. All that remains are the Titles.
View 3 Replies View RelatedWorking in Civil 3D 2014 SP1 I have a Design Profile that I have created by setting the Existing Profile to 'Static' and Creating a Copy of the Existing Profile... This leaves me with a Design Profile that follows the Existing Surface. The problem begins when I delete a section of PVI's and introduce new 'Design PVI's'... I have found that at apparently random times my Design PVI's have been lost and replaced with the original copied PVI's that follow the Existing Surface. This has occurred more than once and I can't find any reason as to why this may be occurring...?
Currently using Civil 3D 2013 & 2014 SP1
I have a section view base map that has labeling at the grade breaks of a corridor section. (see correct labels image)
I made a minor change to the alignment the corridor is using and when I opened my section base, most of the section view labels were messed up. (see messed up labels image)
Some views were missing labels and in others, they were grouped together in a lump.
The settings I am using are in the third image. If I checked either the start or end offset box, then unchecked it and closed the dialog, the labels would fix themselves.For reference, there are about 300 section views in this base drawing.
Civil3D 2014 SP1
Win 7 Professional - 64-bit
HP Z400
Xeon W3550 @ 3.07Ghz
24GB of RAM
Nvidia GeForce GTX 760
One of my users has a strange problem. While editing a drawing (opened from the network), the drawing switches to read-only when she tries to save it, and the .dwg file on the network folder from which she opened the file disappears. The lock files are still there, but the .dwg is gone. She can do a Save As, so she hasn't lost any work (yet!), but the problem has me perplexed.
This problem started when we converted her to Civil 3D 2011. At the same time we also upgraded her to Windows 7 64-bit.
I have about 20 other users on this same platform, she's the only one who's had this problem. I've done a repair install but that didn't fix it. I haven't yet done a full uninstall & reinstall, maybe that's what I should do next.
I have a network recovery bin application running on the server, but it has no record of the file being deleted.
I have C3D 2013 and recently my profile labels for sag and crest vertical curves are disappearing. When I first open the drawing and the program goes through loading I can see the labels but once it stops loading they disappear. All my levels are on, I have ran an audit several times, I have deleted the labels in the manager and replaced them but once I save and quit they are no longer visible. I am able to see the labels through an xref of the drawing but it appears that the labels have been reset to their default position and not where I had adjusted them to view them within the viewport. I have attached pictures of what it looks like.
View 9 Replies View RelatedUsing 2010 with update 1 or whatever it's called these days, I'll just call it the first fix.
I've made three grading objects using "Grade to Relative Elevation" along a feature line. Then I've added a grading transition between them. This seems really unstable now, like making the wrong move makes the whole thing disappear...but what is strange is the feature line that is attached to the grading object that I have added into my surface remains, but there are only a few lines where the grading objects used to be, basically the line that seperates the different sections of grading.
There's no way to edit the grading again either, it has to be remade, because there is nothing to select.
Civil 3D 2010
Dell Precision 690
Intel Xeon 2.00GHz Dual Core
4 GB RAM, 256mb nVidia Quadro FX 550
Windows 7 URC 64-bit Operating System