AutoCAD Civil 3D :: Changing Profile In Shortcut Target
Mar 22, 2012
I have just installed Civil 3D 2012.
For all previous versions I was able to change the default Profile <<C3D_Metric>> in the Shortcut Target to my custom Profile with no load errors.
When I do this in 2012, I receive a rash of errors upon load(see below), wich results in an incomplete program.
c:program filesautodeskautocad civil 3d 2012acmapworkspace.arx cannot find a dll or other file that it needs.
c:program filesautodeskautocad civil 3d 2012acmapdwfapi.arx cannot find a dll or other file that it needs.
.Failed.
AcMapWorkspace.arx Load Failed
Unable to access Shared Pipe Catalog folder.
Please verify configuration.
Run 'setNetworkCatalog' to reset.
c:program filesautodeskautocad civil 3d 2012acmaploader.arx cannot find a dll or other file that it needs.
c:program filesautodeskautocad civil 3d 2012aeccuimodel.arx cannot find a dll or other file that it needs.
How can I set things up so that it will load with my settings?
Windows 7 64 Bit
Intel(R) Core(TM) i7
860 @ 2.8 GHz
8 GB Ram
View 1 Replies
ADVERTISEMENT
Mar 5, 2012
I originally did an existing surface that I was not really satisfied with. Then did an existing and proposed profile using the LandXML import/export option for getting the information from one file to another. I have since redone the existing surface to something I am more satisfied with, and set up data shortcuts, but I cannot figure out how to update the existing portion of my profile.
Essentially, I want to "unload" the previous surface information from LandXML and redirect the profile to the data shortcut information so the existing portion of the profile can be updated... preferably without disturbing the proposed portion of the profile.
There is a dialog box that lists information about the profile, but it does not want to let me modify or change anything.
Windows 7-64
8GB RAM
AutoCAD Civil 3D 2013
View 1 Replies
View Related
Oct 24, 2012
I changed the target framework for my project from .NET Framework 2.0 to 4.0, and also changed the Inventor.exe.config file to read
<supportedRuntime version="v4.0"/>
Now when I debug the ribbon tab that I am creating is nowhere to be found, but if i change back to 2.0 and debug, the ribbon tab is back.
View 3 Replies
View Related
Sep 20, 2010
I have a scene with an object with multiple blend shape targets. I'm not using custom attributes to control these targets (since doing that makes the Blend Shape Editor nonfunctional). I'm just directly changing the value in the channel box's 'Input' section, under 'blendShape1'. By typing in the number directly, I can get it to work with any number I want, but if I try the Maya Cntrl-drag method to interactively change the number, I'm stuck between values of 0 and 1. Is there any way to change the min and max of these attributes? Its strange that I can type in whatever I want and it will work, but cntrl-dragging does not work that way.
View 1 Replies
View Related
Sep 6, 2012
C3D 2013. We have profile line labels, some of which get manually edited (for example, change the "<[Tangent grade(FP|P2|RN|AP|GC|UN|SD|OF)]>" to a static number such as 0.29%).
However, if you CTRL+Click and select one of these labels and change the style of that one label, then the manual edits are lost and the label reverts back to the default string.
Is there any way to turn this behavior off?
View 1 Replies
View Related
Dec 4, 2012
We do not use "A" as our default datum ID.
Instead of manually changing this each time I place a Datum target can I change the default?
View 1 Replies
View Related
Dec 16, 2013
I am building sub-assembly, I just want to know if there is any example or tutorial on how to add target parameters to sub-assemblies.
View 6 Replies
View Related
Sep 4, 2013
I am using OffsetTaget.isValid in my subassembly.But i realize that when i put this formula it checks the whole drawing for that target and if the target polyline exist even a piece of polyline in the drawing then C3D considers it for all sample lines.Is ıt possible to be able to check each single sample line if it is going to intersect that target polyline or not?
Civil 3D 2014 x64
Windows 7 64-bit
16GB RAM
View 2 Replies
View Related
Dec 5, 2013
i have just spent 8 hours today trying to find a link that will vary target a poly line that i have set. i cant seem to find the link that will do what i need as per the attachemnt. the section between the edge of the foot path and the start of the fill/cut slope needs to be variable
i know how to set all the targets but this link seems to be a fixed length.
View 1 Replies
View Related
Nov 21, 2013
I want to programmatically assign Targets to subassembly of baseline Regions but I could not Success in that here it is the code
Corridor corridor = ts.GetObject(icor.ObjectId, OpenMode.ForWrite) as Corridor; foreach (Baseline b in corridor.Baselines) { al = ts.GetObject(b.AlignmentId, OpenMode.ForWrite) as Alignment; foreach (BaselineRegion br in b.BaselineRegions) { double st = [code]........
View 2 Replies
View Related
May 24, 2013
What i want to do is ; i have a corridor with both right/left sides ending with linktosurface with fixed slope.In some sections my existing surface is not wide enough to get intersection with link to surface with fixed slope. So i want to use this "conditional horizontal target " if my surface is not enough wide for intersection then just intersect or go to the edge of my existing surface. But i learned that surfaces cannot be used as an offset target with that subassembly.
View 9 Replies
View Related
Jun 28, 2013
I created a custom assembly that has an offset target. Is it possible to program my subassembly to target only on the side of my subassembly (and not criss-cross onto itself it the target is on the other side)?
View 9 Replies
View Related
Jun 26, 2013
Let's say I have an assembly called Original, as shown below with a 6m wide lane. Now I want to target it to 8m wide for some road widening. Now, will it stretch along the slope of the subassembly (Case 1) until 8m width, or will it just shift laterally to 8m (Case 2)?
I know that we can set the default slope of it, but I'm not sure if it gets overriden due to the Target-width process.
View 5 Replies
View Related
Dec 10, 2012
In particular, I am attempting the infamous task of creating driveway openings using a horizontal target with my sub-assemblies. I referred to the AU 2010 video tutorial that gets passed around here on the boards, and for the most part, it works with ONE tiny exception.
Like in the AU video, I set my conditional target to look for a particular layer, and I first attempted the exercise by placing ONE polyline (i.e. driveway opening) on the layer, and set set conditional "found" and "not found" targets to find this pline. The target found the pline on the layer on the right side of the road where I drew it, and created the opening as hoped, but it created an opening on the LEFT side of the road as well!
What do I have to do to prevent the conditional horizontal targets from ignoring the exact opposite side of the road? In my assembly, the left conditions are set to LEFT, and the right conditions are set to RIGHT, but when the corridor gets modeled, BOTH sides of the road will show an opening even if there is only one pline drawn.
View 9 Replies
View Related
Mar 26, 2012
I have a variable sidewalk width and would like my corridor to follow sidewalk as defined by Target Alignment for Sidewalk width (polyline). My sidewalk is merging at ends with roadway however my corridor feature lines presenting sidewalk is not following/merging with target. In all other locations, it follows the target width however where sidewalk merges with road, feature line goes straight.
Attached PDF should hopefully explain what I want to say. Could not attached dwg due to size issue.
I am using Basic Curb and Urban sidewalk assembly wherein my Blvd targets are set to 0 (none).
How can I make my corridor follow sidewalk width target exactly.
I am using C3D 2010 , Win 7 Pro.
View 1 Replies
View Related
Oct 29, 2013
I can import my SA fine, but the problem is that the top of it needs to be cut off 1 m above the existing ground (which is already a surface in civil 3d). How do I setup the target surface so that when I import the SA into my drawing, I can link it to that surface and have it cut off 1 m above the surface?
View 5 Replies
View Related
Nov 29, 2013
Am struggling to pull off some corridor but the standard daylight subassembly is letting me down. It mulfunctions when I connect it to the Generic Linktoslope subassembly. In some Areas it works fine but in others it doesn't. My plan is to apply a ditch at the point where the LinktoSlope meets the ground level and to have this ditch again daylight back to the target surface.
View 3 Replies
View Related
Dec 20, 2013
how to create corridor, and I have a question about assembly elevation targets.
When creating a corridor, the profile is required as dependent object, which gives the elevation of the centerline of the road. Based on the definition of assembly, the elevation of the corridor at the offset targets can be determined by the profile. My question is if the assembly elevation target specifies the elevation at the offset target too? If so, why both profile and assembly elevation target are required?
View 6 Replies
View Related
Oct 15, 2013
I've to make a tunnel on my project. I get some subassembly on web but all the tunnel subassemblies have the target point on Width or Offset Target and Slop or Elevation Target. I don't know whats happens but only my region that owns the tunnel subassembly isn't recognizing on corridor, and isn't drawing on my sections too.
View 9 Replies
View Related
Jul 23, 2013
This is my first corridor and I've been slowly working my way through it, but just seem to be running into problems left and right. My latest problem is the following;
I have my Corridor's Subassembly Daylighting set to target my Left side 33' R/W offset alignment. For 90% of my alignment everything is working fine or at least appears to, but I have 3 different areas where the Corridor refuses to daylight from the bottom of the 1' ditch out to said left alignment target even though the ditch is well below existing grade. I've attached 2 screen grabs.
Windows 7 Prof w/ SP1, 64bit, Xeon 3Ghz, 16GB
Civil 3D 2013
View 9 Replies
View Related
Jul 21, 2013
How to create multiple offset target. It mean lane, median, sidewalk extra. I have attached exactly what i expect.
View 3 Replies
View Related
Jul 24, 2012
I created an assembly with a broken back subassembly. I moved it to a 40cm horizontal offset away from the axis. I attached it to a corridor using two polylines as targets. One for the broken back and one for the outside lane. In civil 2011 everything works fine.
In civil 2012 the ETW is offseted by the same value i moved the subassembly away from the axis! If i change the subassembly offset to eg 1m then when rebuilding corridor the ETW moves to 1m away from the target polyline!
Same strange behavior using subassembly R2011 or R2012.
See the attached dwg.
View 8 Replies
View Related
Jan 17, 2013
When trying to make an existing features corridor when I select Target to set the existing surface I get an error
"No target found in the scripts."
I have attached a word file with the error as it appears on the screen.
View 5 Replies
View Related
May 15, 2012
if i want to target the existing surface beyond the edges of my road/sidewalk, should i use the link slope to surface subassembly at both ends? i want the model to test if in a cut or fill situation, and then target.
Civil 3D 2013 SP1, Win 7-64 bit
12GB RAM
View 1 Replies
View Related
Jul 9, 2013
When I run my corridor I get an error message that says "Failed Target Not Found" it is for the subassembly provided by WisDOT called UrbMedian.
View 4 Replies
View Related
Nov 5, 2012
I am trying to model a DOT project in a fashion that allows a corridor surface creation for not only the finished surface, but also the datum surface. This is a machine control project currently under construction. One of the DOT's typical sections includes a shoulder subassembly with a grade break in it. This particular assembly varies in width at the grade break. I would like to have the option for a target width alignment at the grade break.
See attached sketch.
View 5 Replies
View Related
Mar 1, 2013
I have an alignment label that I normally use to show the PVI's of a profile in the plan view.
This is a little unusual, but in a specific case I wanted to design my profile at one alignment, but show it at another. I designed my swale profile in the pathway profile view and then superimposed the swale profile on the swale profile view. I then went back to the swale alignment to add these labels.
It's a no-go AFAICT. The only profile available for me to select for these labels is the original ground profile from the surface.
View 5 Replies
View Related
Nov 4, 2013
I'm working with a structure profile label style and it seems like the only way to anchor the position of the label is based on offsets from the structure itself... Any way to position the label based on the top of the profile view, so that I could make all of my labels horizontally aligned above the profile view?
View 9 Replies
View Related
Mar 14, 2013
Im creating a Profile Bandset and would like to have multiple surface/profile elevations shown, ie: EG, FG, Back of Curb and Back of walk. While creating this bandset I see that the text component editor properties only has code for profile 1 elevation and profile 2 elevation in the properties area, which the code for this looks like below.
<[Profile1 Elevation(Uft|P2|RN|Sn|OF|AP)]>
<[Profile2 Elevation(Uft|P3|RN|AP|Sn|OF)]>
Ive tried to write my own code using the profile 2 as an example but it doesnt seem to work as a 3rd surface/profile and only seems to mimic the profile 2 elevation when placed in the band
My questions are as follows
1) does Civil 3d only allow 2 surface elevations in any band set? if it does allow more profiles/surface elevations what am i missing to create it?
2) if Civil 3d does alow for multiple surfaces to be shown in the band set how do i get the text component editor to supply the extra profile elevation codes? or would i need to create from scratch
3) if i need to write the code from scratch does any listing of the codes and meanings of each code ie what does RN, Uft, Sn and so forth do and mean .
View 3 Replies
View Related
Mar 5, 2012
I have a group of profiles in a drawing and I want to change how one of the profiles is displayed through the profile view style manager, but I do not want to change how all of the profiles look. Is there a way to change the way a single profile looks without changing all of them?
View 2 Replies
View Related
Jun 17, 2013
I have a profile showing proposed storm sewer, existing sanitary, rock surface, existing surface, and proposed profile. Today for some reason the proposed profile and labels, and the existing surface are not showing on the profile and I'm not sure what has changed or how to get them back.
View 3 Replies
View Related
