I saw a discussion similar to this in AutoCAD Maps 3D but it did nto apply to this specific problem. I am working in AutoCAD Architecture 2010.
When I erase a line in my drawing, it selects all lines in my drawing (4194 selected) and then says "scan terminated by control-c." Unless I undo this command it does not allow me to click anything in the drawing.
I'm trying to click on a polyline and change the shape of it by dragging it's corners around. So when I do that, and hit escape to exit the "stretch" command, it undos what I did and I get a "Scan Terminated by Control-C" error.
I've tried auditing (0 errors) and saving, closing the drawing and reopening it. Still does the same thing.
Any way to transfer a same Lman in a Constructs floor plan dwg to a floor plan view?
My work place produces construction drawing only, no 3D, and we would like to start using constructs, view, sheet system for dwg. orginzing only. We mostly work on big commercial projects.
In Constructs, we have our main plan which includes partition plan, RCP, furniture plan, finishes plan, with annotation, and we manage all this plan through LMAN.
When I create views, I will open my main plan and open lman to set it on partition plan (for example), and save dwg. From here, I create my partition plan view, and a very clean partition plan view created very nice. And I will do the same to create views for RCP, furniture plan , etc.
The one problem is, when will views already created, we sometimes need to go back to the main dwg. and add new layers and informations. LMAN we set up nicely and I work very well on the main plan after we add new layers in certain LMAN control plans but the same LMAN system doesn't transfer to views. I will need to open every plan view and layoff the new layer that just created. I am wondering is the view will updated the same LMAN that we set up for our main plan, so we save time to check our view is showing the right information?
In ACA2008, can the display of each of the four edges of a cell in a table be controlled individually? I want left and right edges of cells to display, and top and bottom edges to not display. In the Cell Border Properties dialog box, I can set the Lineweight, Linetype, and Color of each edge, but I don't see how to set the visibility of each edge.
View 4 Replies View RelatedOur team is doing program customization in Inventor 2011 that extract drawings based on 3D model. When the program runs and reached the line that has either open, close and save method, Inventor program automatically terminated and “Inventor Send Error Report” appears. When we tried to debug the program and when it reached the line that has either open, close, and save method, we force to exit our customized program but the same case, when it is totally terminated, Inventor program also terminated and “Inventor Send Error Report” appears. When we investigate the problem, we tried several solutions such as setting the active document to new variable, added a method to pause the program for few seconds, etc but still no effect. Our machine is using: Windows XP Pro x64 SP2 Intel Xeon(R), 6 GB RAM Is there a VBA for Inventor that is intended for 64 bit machine? Because I think we use 32 bit VBA in Inventor. What does “Inventor32bitHost.exe” means in task manager? Is there any relation to Inventor VBA?
View 1 Replies View RelatedWhen I try to import the sketchup file into max i get the error "X32 reader terminated unexpected" I have tried importing to 3ds max design 2013 and 2014 and used different sketchup versions and also files as simple as a box. everytime i get the same error.
View 3 Replies View Relatedafter configuring ufraw i am running the make command and get this error:
CXX dcraw.o
dcraw.cc:52:18: fatal error: lcms.h: No such file or directory
compilation terminated.
Using AutoCAD 2013 and TOL command to generate feature control frames. We set our lineweights based on layer assignments.
Problem is that when printing, AutoCAD seems to randomly assign a lineweight to the feature control frames. It can vary from what it's supposed to be (such as lineweight set for the dimension layer) or thicker than even what the object lines are set at. Seems to pick a random linewieght at time of printing for these elements (just the boxes, not the symbols/text itself).
Is there a setting we should be defining somewhere to force it to follow the lineweight of the layer that it has been assigned to? Known bug?
I have som old drawings of my house in paper. It is not possible to get the orignals on file.
Is there a way to scan and convert the drawings into DWG files?
I am planning a rebuid of the house, and have started the process of making new drawings. It is a bit tedious to draw to hole house again as long as I have the originals on paper, and I own a scanner...
How can I scan a 2D picture into CAD and have it inputted as a 3D image? What would I need to do do add depth to the drawing?
I'm considering getting CAD 2012.
I have 3d scan of aircraft door frame (see attach) in point cloud format. I'd like to overlap 5 different frames and construct a new 6th frame by averaging out all of the points.
At the moment, the 3d data files has no surface and I'm unsure if adding surface with the construction of the 6th frame. I will also need to take into consider alignment, point density, and orientation when overlapping all of the frames before I can start work to average all points (Note: each scan are taken from 5 different vehicle).
I have both Rhino3D and Autodesk Alias Design 2012. What are the logical steps to do in this case?
I am working on a research project that requires that I scan a cast object and shell it out to a width of .125 inches. I used my school's 3D scanner to scan the cast, and I have a good model. I've made it a surface and exported it as an STP and an IGS into Inventor. I used the Sculpt feature to make it a solid object, but then I could not shell it because a few flaws in the cast made miniscule holes.
I then tried to use the scanning program's spline feature to cut the cast into splines to loft in Inventor. However, this made 5 non-connected lines at each location, so I couldn't loft. How to create a solid and then shell with either method?
Is there a way to scan or copy our existing rowhouse plans onto auto-cad?
the plans are completely finish so we do not need any changes. we simply want to be able to view these plans thru a cad format.
I just downloaded my trial of inventor suite and before going through learning tutorials I want to find out the general work flow I need in order to see where to focus my attention during these 30 days.I need to be able to do mechanical part and assembly designs built around 3 scan files (mainly provided as .STL files).
1) take the file and orient it to the project axis/plane
2) scale it if needed
3) design components around 3 scan characteristics
4) design modifications to 3D SCAN to accommodate designed components (such as bolean out pockets to house components within 3d scan features
5) modify surface of 3 scan to allow surfaces to flow into changes made in step 4
example:
-take 3d STL scan of a solid screwdriver handle
-orient it to the inventor work planes and axis
-design a metal screwdriver bit based on the shape of the handles 3d scan
-design and boolean out a cavity to accommodate the metal bit
-place bit design within cavity
modify screwdriver handle surfaces to seamlessly flow onto the metal bit... what software would do what part of the process and if there is specific terminology what that is so that I can better search the knowledge base and Autodesk University?
Every time i open some drawings i have to wait for the command line to to scan some files or something.
It is very similar to this one but it is not solved. [URL] .....
here is what the command line writes every time:
(setq flag nil)
(setq flag1 t)
(if (findfile target)
(progn
(setq wjm1 (open target "r"))
[Code] .....
I am trying to find a way to import a laser scanned mesh or point cloud file into Inventor (2013) such that I can use it to make a parametric representation of the form. The import format can be STL, OBJ, VRML, XYZ or PLY. I have tried the Mesh Enabler from Autodesk Labs but the files I am looking to work-on are bigger than the enabler can cope with and my system slows right down or locks-up.
I know bespoke reverse engineering software is the ideal way to go but I was hoping there was a way to model over a mesh to represent its form to create a placeholder in a parametric assembly. I'm not looking for accuracy, just a surface or solid output that can be constrained to native inventor parts. If I could get the files to STEP or IGES someway that would be enough.
I updated my computer to windows 7 32 bit and need the file: AdskHwCertificationDatabase.xml - version 17.1.0.4 so that I can find out the correct driver for my OS and my quadrofx 1700 graphics card. Autodesk doesn't support 2008 Architecture and the on;y file I can find is buried in a torrent file with a pirated copy of 2008 and I DO NOT wish to download that.
View 3 Replies View RelatedIm currently using Autocad Architecture, is it true that Autocad Architecture creates a bigger file size compared to Revit Architecture? Lets say that same structure and components are created.
View 3 Replies View RelatedThe content browser in AutoCAD Architecture 2013 does not seem to be working on a standard users computer. The profile has been rebuilt alongside a repair/reinstall through the control panel.
Ctrl+4
Tools > Content Browser
and typing content browser in the command do not result in anything.
I do not get why new Archicad Architecture has 3d modeling when Revit architecture already provided for it. What is the different between those two? I really want to know the difference. It bothers me somewhat about them.
View 4 Replies View RelatedI'm keen to reduce into A4 equivalents. I was told Photoshop would be able to cope,
I need to use layers and canvas size etc. and maybe dragging across assuming I've scanned the two halves of the A3 correctly/accurately?
I upgraded from CS3 to CS5 and need to be able to import using TWAIN so that I can scan at 256 colors like I used to be able to with CS3. I cannot convert to 256 colors afterwards as the quality is too poor.
I am using 64 bit Windows 7. I tried installing the TWAIN plugin in the Adobe/plugins/import folder but it does not show up in the import options after restarting PS. I wouldn't mind downgrading to PS3 if I have to.
How can scan coins for web use?
View 1 Replies View RelatedHow do I get Epson Scan from Photoshop?
View 1 Replies View RelatedI have a card 7.5 x 5 .5. I would like to scan it and use it as my desktop wallpaper for the season. I have 2 Dell u2711 monitors at a resolution of 2560 x 1440. However, when I scan I get a terrible image when I attempt to set it as by background in Windows 7 Professional. how to do this. I have Lr 4 and CS 5.
View 3 Replies View RelatedMy first question regarding CS5E was mistated. What I really want to know is how to scan a photo into CS5?
View 1 Replies View Relatedregaurding pictures with scan lines. I have searched and searched and can come up with no way to remove scan lines, but lots of ways to put them in.
I create ads and was emailed a picture of a house that is covered in lines. I would love to know if there is a way to remove them in PS. I have PS CS.
I had to scan and resize. Original, physical picture is 1 1/4in X 2in. Scanned image requirements: resolution of at least 150 dpi, 600 X 600 pixels, 24 bit color, and keep it under 240 KB.
I have basic Canon scanner and CS2....
i got make scan lines i make a line across take the clone tool clone it as a patter and when i goto the bucket and select pattern i cant find it.
View 2 Replies View Relatedway to make a text animation in Image Ready. I'd like to have white or bright green text against a black background and have it display as if it was being scanned over. One wide stripe moving right to left exposing the text underneath then moving back, never exposing the whole word at once, just a section. I had thought I could make a black layer over the top of the text, clear away a scection and manually move the layer in IR, but to no avail. Sorry I don't have a visual example of it for you.
View 2 Replies View Relatedhow to make those trendy tv scan lines?
View 3 Replies View Related