Our team is doing program customization in Inventor 2011 that extract drawings based on 3D model. When the program runs and reached the line that has either open, close and save method, Inventor program automatically terminated and “Inventor Send Error Report” appears. When we tried to debug the program and when it reached the line that has either open, close, and save method, we force to exit our customized program but the same case, when it is totally terminated, Inventor program also terminated and “Inventor Send Error Report” appears. When we investigate the problem, we tried several solutions such as setting the active document to new variable, added a method to pause the program for few seconds, etc but still no effect. Our machine is using: Windows XP Pro x64 SP2 Intel Xeon(R), 6 GB RAM Is there a VBA for Inventor that is intended for 64 bit machine? Because I think we use 32 bit VBA in Inventor. What does “Inventor32bitHost.exe” means in task manager? Is there any relation to Inventor VBA?
I'm trying to click on a polyline and change the shape of it by dragging it's corners around. So when I do that, and hit escape to exit the "stretch" command, it undos what I did and I get a "Scan Terminated by Control-C" error.
I've tried auditing (0 errors) and saving, closing the drawing and reopening it. Still does the same thing.
When I try to import the sketchup file into max i get the error "X32 reader terminated unexpected" I have tried importing to 3ds max design 2013 and 2014 and used different sketchup versions and also files as simple as a box. everytime i get the same error.
Nothing appears as the “Stakeout Alignment Report” is executed,I wanted to execute the “Stakeout Alignment Report” (attached) but nothing appears! This is despite the fact that:
-The IE is set as default browser (attached) -The Active X is enabled (attached)
I have AutoCad2013 installed on my system, I am running Windows 8.1, my system updated automatically. After updating none of my Autodesk software will launch. When I try Inventor I get a capatibility error and I follow the link and get the SP1 file but it says it also no capatible. When I try and launch Autocad 2013 I get an error thas says" acad.exe This app has failed to start because its side by side configuration is in correct" I als have Revit 2013 on my system and an error comes up saying "This app was unable to start correctly (Oxc0150002)"
I want to send an image by email using Organiser. However consistently I have found that to import contacts from Live Mail, Organiser does not give as an option and defaults to Outlook. I have gone to Edit, Preferences and made the default program Live Mail but when I go back to sharing, consistently it only gives Outlook as the option. Have gone as far as uninstalling Outlook but even that has not worked. I have rebooted the PC, but nothing works !
i am trying to do a print out of our lots within our proposed plat & need to do indivial closure reports for each lot. when i try an run a report i get Error - Invalid execute file.ive added new .dll files that I got off the net but they do not work either. which are located at C3D 2011/enu/Data/Reports/Net.
Ok just took the leap to Windows 8 and when reviewing the Reliabity Report in Windows PSE11 is showing up as stopped working, and it is causing some performance issues. it is because I dont have Quick Time installed. Installed Quick Time still have the problem.
A thin white border around the figure that I had edited appeared out of nowhere. I was able to erase it before editing the background but now I can't erase it or remember how I did that.
how to get rid of this line? If by setting the eraser color to the background color, how do I do that? As I get rid of the line, I'd also like to refine the figure's outline so it becomes cleaner.
I uninstalled Photoshop CS5.1 ME (Middle Eastern) version from my 64bit operating system (Windows 7 Home Premium) and went on to install CS6 EXTENDED after a fresh restart (I also deleted remaining CS5 folders in "Program Files' Adobe directory"). The setup went fine. But, when it finished, it gave an error message saying that Adobe Photoshop CS6 didn't install or didn't install correctly. From there, I copied the error report/log it gave out:
Exit Code: 6 see specific errors and warnings below for troubleshooting. For example, ERROR: DF050, DW063 ... WARNING: DF029 ...
Photoshop started fine and worked fine (only used it a bit) after the "failed" installation but, the Update option in the Help window was grayed out (trial version, just to let you know). Is that a limitation to the trial version? Or is it straight up an error?
My question is, what did the error report mean and what could be wrong with my currently installed version of PS? BTW, I didn't use Mini Bridge yet, although all of its files are present in the Program Files directory for Adobe.
I saw a discussion similar to this in AutoCAD Maps 3D but it did nto apply to this specific problem. I am working in AutoCAD Architecture 2010.
When I erase a line in my drawing, it selects all lines in my drawing (4194 selected) and then says "scan terminated by control-c." Unless I undo this command it does not allow me to click anything in the drawing.
I recorded a few short children's programmes from the TV on a PVR and transferred them onto a DVD. The DVD plays perfectly on my computer. I had hoped to edit the programmes a bit (cut out adverts etc) but when I try to import the DVD into VS I get the message "Failed to read DVD information. Report ID: 0x80040901 (2305)". Presumably this code has a very specific cause. I am using VS11 on a Vista computer.
I have illustrator cs5 and I am trying to send a file to someone who has cs3, I saved it in a cs3 format but when they try to open it an error occurs saying, "could not find The linked file, choose repair to locate the missing file, replace to open another file, or ignore to leave file unchanged".
When I use the quick selection tool (or when I use content-aware scaling) I get an error message saying "could not complete your request because of a program error." I am working with NEF files, 4 GB of RAM, fast machine with plenty of scratch space, Radeon X1950 crossfire graphics card. With small .jpg files, the problem doesn't occur.
I have been re-saving many of my PSD files using CS3 image prosesssor with compatibility mode turned off. They have simply been saved again as PSD files into a different folder - no changes to the original PSD files. This has worked well and reduced file sizes by up to 50% (I had compatibility mode turned on previously).
of the 60 files I have processed, 3 will no longer open , I get a message that says "file will not open due to a program error."
these files have only ever been used in CS3. , they are quite large from just under 1GB to 1.5GB, however other similar large files have processed successfully. I have re-tried without success.
I still have the original files so no data loss is involved.
I have a problem: when i scale objects (even if I do a proportional scale clicking "Shift" button), the program automatically modify the alignment and the form of the object. for example if i scale a "stickman" which is completely symmetric, finally I have a figure with arms of different dimensions and proportions. Im using the cs5
The problem is not about the stroke dimension, is the path that is modified.
When defining a wire, to get the correct termination at each end I would like to add Virtual Parts to the Connector Pin Name properties (Select the with, RMB - Harness Properties- From To- Properties (connector Pin Name)- Virtual Parts.
Is there any way to get properties from this onto a Loom Report allied to the wire? Our current Loom drawings list the wire with the terminal connectors at either end. I have tried using GETPART1 & GETPART2 in the cfg definition but this picks up on the Part with the Pin, not the Virtual Part on the wire.
Assemble several parts from Solidworks through step profile.Part2 and part3(attachments) no static interference ,when driving constraints (driver) immediately a collision report appears.Additional,when restrain the part 3(attachments)and drive constraint(driver) meanwhile open the collision detection ,finally,part2(attachments) goes through the barrier no checking collision.
I have an assembly already created with weld bead on it, at the moment I click on creating a weld bead report, it asks me to include all assemblies, I selected the option, and next it opens a window to save the spreadsheet, select the destiny, and next it says that no weld beads were found! report will not be generated.
