Is there a way to stretch or adjust space dimensions but maintain the square footage? If I want to change the length by 4'6" can the width adjust automatically to maintain the square footage?
View 5 RepliesI need to calculate square footage quickly. I am currently polylining everything. Here is what I need to do quicker:
Calculate square feet of each room with these requirements:
- When meeting a hallway to the outside face of the wall
- when next to an adjoining space, to the midpoint of the wall
- When against an outer wall, going to the face of the wall.
now i know this is possible because i did it once before with 2012 but now i can't remember
View 2 Replies View Relatedhow the area calculation works for finding the square footage of a dwg.
I can easily get a rough estimate of square footage on L X W....but when i use the area measuring tool, i get total inches and a total sq foot estimate of 1.7xxxxx which i don't understand.
I used to be able to obtain the sqare footage of an area with the AREA command. A list would generate about seven or eight lines, listing the square footage, inches, perimeter etc.
Now all i see is one line; the area/perimeter (see attachment). Did i change a setting somewhere to obtain this simplify version of the AREA cmd? Something is not right...
I tried the MASSPROP and MEASURE GEOM, those will not show the square footage. This used to be so easy, what am i missing...
I am trying to find a way to that I can very quickly measure the remaining square footage on a floor plan and/or equipment cabinet on a regular base. I have been working with AutoCAD for over 10 years so I am well aware of the typical command such as Distance, Measure & Area. I am wondering if with the latest AutoCAD 2013 there is a new command to do this faster.
View 3 Replies View Relatedwhat I can do, to maintain project world coordinates at exact place when moving UCS and PLAN.
For ex.I have this project, In witch I'm making house plan on one of those plot, to draw in comfortable position I want to rotate view with UCS.
I type such command UCS/ OBJECT/ pick an object and ENTER, then PLAN/ CURENT and hit enter, now I have comfortable plan position to work with.
The problem of all this, is that when I redo all backwards, coordinates doesn’t correspond to previous places.
I have modeled a house with some colums supporting a deck. Ideally I would like my colums to be round with a spiral twist.. But would be happy to know how to change the default square into a round colum.
View 1 Replies View RelatedHow I can update my diesel expression to display the area in square feet not square inches. See expression below.
^C^Cattdia;0;_-insert;AREABLK;1;1;0;$M=$(getvar,AREA);attdia;1
I used the free select tool to free select an area of an image that is not a square (odd shape), how do I make that selection a perfect square if pasted to new image or new layer??? rectangular would be fine too...
View 14 Replies View RelatedWhen I use the square selection tool, the selection edges are rounded rather than square. I can't remember how to rset this.
How do you make the edges square by default?
If I change the size of, say, the "file open" box, and shut it down, then open it again, it goes back to the default small size. Is there a setting that I can change so that the dialog box size stay's to my selected size?
View 9 Replies View RelatedI patterned features but the material did not come along for the ride. I know I can change the material manually after the fact but I am making a parametric design so I want this to happen automatically. How do I do this?
View 5 Replies View RelatedI'm trying to make a BOM using a Table. I want to be able to export. I cannot seem to keep the formatting in the length column. I would like it to read feet & inches (example 5'-4 1/2"). These lengths will change often during the design process. The problem I'm having is when I clear the cell contents or delete the information the formatting does not stick. I've tried locking the cell format but that doesn't seem to work. I've attached a file with the table.
View 8 Replies View RelatedIm having a layer state issue with ACADE 2013;Vive saved a Layer state ("trial state") that has about 30 layers and some of them have been frozen.
I made the trial state the current layer state, however, when I save and close the drawing and then reopen it, "Trial State" is no longer the current state. Instead the layer state is changed to "Unsaved Layer state", and I have to manually select my trial state each time. I haven't even modified any layers or added more layers and it does this.
Im wondering if there is any way to keep/lock my customized layer state on a drawing.
When editing multileader text, the insertion point changes. How do I stop this? I have several multileaders with their insertion points aligned together (left justified notes) but if I edit any text, the multileader jumps to a new position and is no longer aligned with the other notes.
View 9 Replies View RelatedI'm using CS3 with a new computer and a 17in crt monitor. I set the monitor resolution via windows to 1280x1024. Made a 4 in square in Photoshop. It's square. When I change the resolution to anything less than 1280x1024 the square is taller than wide. It still shows 4x4 inches with the rulers.
View 5 Replies View RelatedSo we've been sent a DWG file for a large site, that includes a massive aerial (TIF) image.
At this point it's too large to even work with so I'd like to scale it down (proportionally, so it will still maintain the same aspect ratio).
For simplicity sake, lets say the image is 15,000 x 15,000 and I want to scale it down to 5,000 x 5,000.
The problem is that AutoCAD seems to use that pixel size to determine the actual scale, so when I updated the new (smaller) image, it was also 3x smaller in the world.
How do I scale down the image independently of the size so it will still maintain the same scale in the CAD world? (I'm a 3D guy so this is akin to scaling down a texture, yet having the plane its projected on maintain its original scale.)
Existing polyline set to a width of 6. Want to fillet this to a non-polyline with a width of zero.
Currently the two lines will join to create a connected polyline but the original widths are maintained (6 and 0).
I am looking for the system variable where the non-polyline becomes joined and the global width for the new segment matches the first polyline.
my create a circular pattern in an assembly that maintains the orientation of the part being patterned.
This is for foundation plates. There are 3 plates. The plates are square, and have bolt holes in the corners of the plates. Since there are 3 plates and its going around a circle, the angle between the plates is 120 degrees.
Now, Ive been trying this for some time now and what is happening is the firs plate is fine, but then the second and third plate are rotated around their center axis. I would like it to simply remain as inserted and constrained within the assembly.
I have attached a picture to be more clear about what I want and what I'm currently getting.
I am using the following routine definition then calling the different view poins from a pop up menu.
Each time I switch veiw points it drastically zooms out. I would like to maintain the "zoom distance" if there is such a thing when switching views.
Ideally, like when in 3dorbit, I would like it to swing views around similar to that but to the defined viewpoints as below....
(DEFUN V (inp) (setq inp (strcase inp))
(cond ((= inp "T") (SETQ IXY 270) (SETQ FXY 90)) ((= INP "F") (SETQ IXY 270) (SETQ FXY 0)) ((= INP "RE") (SETQ IXY 90) (SETQ FXY 0)) ((= INP "L") (SETQ IXY 180) (SETQ FXY 0)) ((= INP "RI") (SETQ IXY 0) (SETQ FXY 0)) ((= INP "URI") (SETQ IXY 0) (SETQ FXY 45)) ((= INP "UL") (SETQ IXY 180) (SETQ FXY 45)) ((= INP "UF") (SETQ IXY 270) (SETQ FXY 45)) ((= INP "URE") (SETQ IXY 90) (SETQ FXY 45)) ((= INP "URF") (SETQ IXY 315) (SETQ FXY 35)) ((= INP "URR") (SETQ IXY 45) (SETQ FXY 35)) ((= INP "ULF") (SETQ IXY 225) (SETQ FXY 35)) ((= INP "ULR") (SETQ IXY 135) (SETQ FXY 35)) );COND (COMMAND "VPOINT" "R" IXY FXY) );END V.LSP
I have tried numerous times to import from ver3 into ver4 and each time, no matter what I try, I end up with a different look (brightness, contrast etc.) The last time I tried, I reset both 3 and 4 to adobe defaults, then imported 3 to 4 checking none for presets and did not upgrade to image (left the exclamation mark), and the image in 4 looks substantially different that the one in 3. Also, all the sliders are readjusted with this "none" import. They are not at default, which would be zeroed, but all at different settings than the ones in 3. 4's image has less contrast and the color set in the hsl in 3 has been substantially lightened. What am I doing wrong? I read that others can get them into 4 (not upgrading, leaving the exclamation mark) and they are virtually the same rendering.
View 21 Replies View RelatedHow do I maintain links and bookmarks in a PDF? I recently created a multi-page document in X5 with links and exported to PDF. All of the links worked successfully in the resultant PDF.
Yet when I imported the PDF into X6 (and X5) for editing, the links had all gone. I'll need to edit on a fairly regular basis and I don't want to re establish the links (a lot) every time.
I have created an image by combining 2 images the model and the frame (finished1), because i need this image with a clear background when I save it as a GIF the image degrades (finished2) how can i save the image with a clear background and still maintain the details of the JPG?
View 3 Replies View RelatedI open an image in ACR, make adjustments to it.
I open the image in Photoshop, and make a Duplicate.
I close the first image (Not the Copy), and select "NO" for "Do you wish to save changes"
I go back into bridge, and view the RAW file, and though I selected "NO" for changes, the image retains the changes/adjustments made in ACR.
Is there any simple way to return the RAW file to the original state as it appeared prior to ACR adjustments?
The only way I've found to do it is to keep separate files of the original RAW files on another drive.
What is the key combination to maintain proportionality, while resizing an image?
View 4 Replies View RelatedI have one wall (basic wall) where !'ve edited to profile to have a large rectagle omitted. I have a second wall (curtain wall) that needs to occupy that space with a 1/2" gap on either side and a 1" gap along the top. I can maintain the gap along the top, but when the gaps along the sides shrinks below 1", the walls meet and the gap is reduced to zero. I've tried making the internal wall into a group, but whenever the outer wall's profile is edited to within 1/2", And I click the Finish button, the interior wall (inside the group) extends to meet it. Automatically Embed is turned off for the curtain wall. I've tried locked dimensions, but that didn't seem to work.
How I can maintain the gap without the walls closing?
I have a Sony camera wich can record 1920x1080 50p.It's the absolute best quality that camera can capture. The raw footage looks marvelous. After open in Videostudio X6 it plays ok but the final disc blu-ray or avchd even on dvd format the footage looks juddery especially on pans and moving subjects.
View 14 Replies View RelatedIn Photoshop, how do I keep the shot/creation date after editing/adjusting a photograph from raw to psd in order to keep hundreds of images in a chronological order? I am combining files with a second shooter on an event an the timeline is essential.
View 4 Replies View RelatedI created an action that includes changing the format in the Save for the Web feature to .png. When I run the action independently it works fine and saves the file as a .png, when I run this same action as a Droplet it saves the files as .psd. This has worked in previous versions, but I can't figure out why it does not work now. Perhaps something has changed in the File Naming section?
This fails to maintain the .png format in both the Mac and PC versions.
When cropping a photo, is there any way to maintain the aspect ratio? I seem to end up with odd sizes that are hard to print.
View 2 Replies View Related