I have created an image by combining 2 images the model and the frame (finished1), because i need this image with a clear background when I save it as a GIF the image degrades (finished2) how can i save the image with a clear background and still maintain the details of the JPG?
View 3 RepliesI am converting an Excel spreadsheet to PDF using the PDFMaker macro. How do I set a Print Area and still maintain hyperlinks during the conversion?
You seem to have to choose between defining a Print Area OR maintaining hyperlinks. Is there a way to get both?
If I select a Print Area before invoking the PDFMaker macro, I get this message:
Acrobat PDFMaker cannot create Tags, Bookmarks and Links for Worksheets with Print Area other than 'Entire Sheet'. Clear the 'Print area' field in Page Setup to get these features. Do you want to proceed and creat a PDF file without Tags?
i have many drawings in dwg but wish to upload onto my website...how can I convert a dwg file and retain its detail so it can be the same on my web page....have converted dwg to jpeg tiff gifff etc but it loses detail
View 9 Replies View RelatedWindows Vista
PS3 Extended 10.0.1
I see how Photoshop CS3 uses the History Log for actions, but can it be set up to not only record the step but what was done in that step, i.e., a History Log entry shows "curves" but doesn't show that a "darker" preset was used in that step.
Is there a way within Photoshop CS5 to add Author/photographer details to image. When I save?
I have to macs with photoshop and I need to monitor who is editting what I figure if everything saved on my machine gets tagged I could work it out from there? A bit like how microsoft word will add the author by default.
I'm aware of File info but that would be a long process to do it. Ideally not an action either.
I open an image in ACR, make adjustments to it.
I open the image in Photoshop, and make a Duplicate.
I close the first image (Not the Copy), and select "NO" for "Do you wish to save changes"
I go back into bridge, and view the RAW file, and though I selected "NO" for changes, the image retains the changes/adjustments made in ACR.
Is there any simple way to return the RAW file to the original state as it appeared prior to ACR adjustments?
The only way I've found to do it is to keep separate files of the original RAW files on another drive.
I want to change the color of my car whilst preserving all the details like door handles but change seem to figure out a way.
View 9 Replies View RelatedMy printer has asked for images as follows..Final artwork must be High resolution with a transparent background
High Resolution Vector Image
in the following formats
All text converted to curves / outlines
CorelDraw � to V13
Photoshop V6
Adobe Illustrator CS4
.eps
.pdf
We have a detailed drawn image. This has been scanned at 600 dpi and put into Photoshop to enhance the image.We need to know what to do in Photoshop to meet the needs of the printer and get the best possible image for printing.
Photoshop is new to me. I like to paint locomotives for a game, but am wondering how to change the colors from blue to black and keep all the shading and door details. When I use the paint brush I can never seem to get the side panels into the correct color without losing a lot of detail.
View 2 Replies View RelatedHow do you keep all the image details of an image file when you save it as a TIF? I lose half of mine.
View 9 Replies View RelatedIve lost the top toolbar with all the feathering etc details in it. I cant find it in the window toolbar area, how can i turn it back on?
View 2 Replies View RelatedIn Photoshop, how do I keep the shot/creation date after editing/adjusting a photograph from raw to psd in order to keep hundreds of images in a chronological order? I am combining files with a second shooter on an event an the timeline is essential.
View 4 Replies View RelatedI created an action that includes changing the format in the Save for the Web feature to .png. When I run the action independently it works fine and saves the file as a .png, when I run this same action as a Droplet it saves the files as .psd. This has worked in previous versions, but I can't figure out why it does not work now. Perhaps something has changed in the File Naming section?
This fails to maintain the .png format in both the Mac and PC versions.
When cropping a photo, is there any way to maintain the aspect ratio? I seem to end up with odd sizes that are hard to print.
View 2 Replies View RelatedI have several rectangular images each with a drop shadow. I need to also make thumbnails out of the same images. When I tried reducing the sizes of these images, I got inconsistent results regarding the drop shadows. Sometimes they grew, sometimes they got smaller.
Is there a way to reduce the size of images with drop shadows that keeps the shadows looking the same (relatively) as the original size?
i got a nice background picture.. but i want to eliminate the text which cover the background while maintain the background design..
i tried use the magic wand.. but after delete those selected thigns.. background design distorted..
I have scanned and downloaded 400 items in chronological order. When I upload them to DVD they are in random order. How can I maintain chronological order?
View 1 Replies View RelatedThe Move tool - is there a way to turn off the location details as the tool moves around?
View 1 Replies View RelatedI am a Creative Cloud member, and have downloaded all of the products and they are all up to date currently. The issue I have is, I see all these people using a new resampling setting called "Preserve Details". They go Image ------> Image Size, and then the window pops up. Now their window already looks different then mine. Mine looks like it did in CS4, theirs has an image preview inside the window, plus they have another resampling option available to them. Why doesn't my have this option?
I have tried to upload an image to show you what I mean, but I am unable to upload via my computer, and yes it is the correct size (>450 pxs wide by >500 pixels tall, 131 KB).
I downloaded some skin brushes which add more details to the skin after smoothing it..but how can I use it...is it used to mask the blurred layer to keep some details ?
View 5 Replies View Related(Photoshop CS6)I want to apply one and the same action to all pages of a pdf-file. The pages have a systematic error, too dark.
1. load pdf-file
2. select all pages
3. apply action, in my case change level, to all pages
4. save all pages as pdf-file, in the original page order.
I need to prepare an image for professional printing and I want to retain as much quality as is possible.
The final file needs to be a 300ppi sRGB jpg.
The print needs to have a large white border so I am 'placing' the image into a new file where the canvas serves as the border.
In other words, I'm placing an 8x10 image into a new 12X14 file.
My question is: how do ensure that the quality of the original 8x10 image is not affected?
My current workflow is as follows:
1. Save the 8x10 as a 300ppi, 16bit, prophoto tif.
2. Create a new file with the dimensions of 12x14, 300ppi, 16bit, prophoto.
3. Place the 8x10 image into this file.
4. Save for web & devices at JPEG, 100 Quality, Convert to sRGB
hat is the best way to resize (reduction) an image and maintain the image sharpness. The image I have is a high resolution 500 x 500 pixel logo with a text which I have the Adobe Illustrator (AI) vector file.
I need to resize the image to as small as 130 x 40 pixels and export to gif.
I have tried the following methods:Photoshop Resize > Resample Image > Bicubic Sharper (best for reduction)Create a 130 x 40 pixel Photoshop file and copied object from AI to Photoshop as a smart object and export as gifCreate a 130 x 40 pixel AI file and export to gif . However, I tried to view the image from my mobile phone (iPhone), it is not sharp even though I have created from the vector ai file.
I research on the internet and find out that I can actually create a double size image and use CSS to control (divided dimension by 2) so that the sharpness can be maintained. However, I do not have control of the site html/css hence I can't use the method.
Any other way to resize (reduction) an image and maintain the sharpness.
While the Version Sets in my current catalog are collapsed, the version sets in the Catalog on the new computer have all become 'expanded'; this is unacceptable to me, as many of the pairs that are stacked as Version Sets have become separated. While all of the Version Sets are "tagged", it looks as though many of the photos in the expanded sets are without tags. Problem #2 is that the hierarchy of Keyword Tags that I currently use is lost when the Catalog is restored in the new computer's Organizer. I currently use about 500 Keyword Tags, divided into 6 categories (i.e. People, Places, Locations, Events, Other, Bird Species). On the new computer, the tags are alphabetized without being separated into their 6 categories. I currently have close to 30,000 items in my Catalog, and have spent hundreds, perhaps thousands, of hours editing (and saving both the original and edited files as Version Sets), tagging and captioning all of my photos. I followed the instructions previously published in "Photoshop Elements Help" regarding backup to an external hard drive and restoring the files in an empty Organizer on the new computer. I also used the "Save Keyword Tags To File" command before the backup. I do have the intact "current" Catalog on my old computer, complete with tags and captions, collapsed version sets, and a list of Keyword Tags organized in the Hierarchy that has worked best for me.
View 2 Replies View RelatedPhotoshop Elements 10. I want to enlarge an image and maintain 300 dpi resolution. If I enlarge the image the resolution automatically lowers. I need to keep the res at 300. How do I accomplish this?
View 1 Replies View RelatedBack with photoshop after some time away and a while back i set up a few macros/batch jobs to add frames to photos and had a few set up depending on the resolution of the photo, portrait/landscape.
I know how to create them again - but obviously would rather not! so question is how do i find out what Function keys I mapped the different batches to?
I'm playing around with the new generate plugin and running into an issue. I have a pre-existing set of icons that need to maintain a 70x70 transparent background. Unfortunately when I set up Generate the assets are cropped to the pixel dimension of the graphic.
Is there a work around? Or do I need to go through each asset and resize it to 70x70?
I have vector artwork that is not aligned to a pixel grid in Illustrator. In CS5, I would be able to paste the vector object as a smart object into Photoshop file that was larger than the illustrator image and resize larger while holding shift to keep the ratio the same.
However with Creative Cloud, if I have a square in Illustrator that happens to be 17.3px by 17.3, then paste to Photoshop in a file that has a larger canvas than the paste, I get uneven horizontal and vertical ratios (width = 18; height = 17). It seems to overestimate the width and make it appear fatter horizontally (which is the wrong aspect ratio). This is very noticeable when vector objects (like perfect circles and small icons) get scaled up in Photoshop.
I have tried unchecking and checking "Snap Vector Tools and transforms to Pixel Grid" but this doesn't seem to fix it. The only way I've been able to get this ratio to be kept is to create a new document with the size automatically changed to clipboard dimensions (which are the desired 17x17). When you paste as smart object, it now uses the correct aspect ratio.
i'm trying to design a layout using slices and such for a website. i'm using the vector objects and layer styles inside Photoshop CS4.
Problem is that during resize, all rounded corners get distorted and do not maintain shape or radius, is there a way to prevent rounded corners from distorting during transform?
otherwise this seems way too tedious to be an effective method of creating a layout that may need adjustments later, since things will need to be recreated.
I'm used to working with parametric CAD (inventor/solidworks), so i'm like a fish out of water without geometric constraints or ability to re-spec existing objects without remaking them...takes me back to the days of autocad.
I want to select an area of video and use a filter on it but maintain that filter all through the video. Currently when I try to use a selection and a filter (blur filter) it will only let me effect one frame at a time. The one frame is under the affected video area. How do I extend that one selection and frame all through the video clip?
View 2 Replies View RelatedI would like to take the pic of sunglasses similar to
and put it into another background but still maintain that natural shadow that is there.