Is there an error in DWG to PDF? When I make a custom paper size A4 with size 210x297 and 0 margins, the pdf comes out wrong, see attached pdf.
I'm plotting extends, center the plot and fit to paper in modelspace. Preview displays correct. This was not an issue in ADT 2007.
I am useing a Canon Pro 9000 MKII and when I try to print 11x14 paper, it will not alow custom paper size. The Canon printer driver does have custom size but it does not show up in printer settings.
View 1 Replies View RelatedI have AC 2010 LT. I have added a printer which is actually a driver for a laser cutting machine. I have been able to add the cutom media size of the machine. I cannot get that size to stick with the printer name. Every time I choose that printer I have to reset the media to the custom size.
View 4 Replies View RelatedI'm running LT 2014 at Win7 x64 and have a problem with Xerox WF 6604 custom size paper settings.
Simply say when I change custom printer size at the printer's driver settings and confirm all dialogs nothing happend and LT use default settings. No dialog about new or temporary PC3 appear so looks that ACAD doesnt know about change at the printer driver?
This problem isn't continual but, for example, I printed something from the same dwg twice, but when third one change was set the very problem will appear and ACAD doesn't register changes.
I have an HP 6500A Plus, and it should be capable of printing edge to edge, even on custom sizes. After contacting both Apple (I am running MacOS 10.8 Mountain Lion) and HP for answers, I burned a lot of time with Adobe either just plain not getting an answer because I didn't buy it or being given the run-around. I need to know what Photoshop is doing to block the available capabilities from working.
View 6 Replies View Relatedhow i can insert a new paper size or edit a paper size in plotting
View 2 Replies View RelatedQ I am trying to set the paper size for a H 30cm x W 80cm image using roll paper on an Epson R3000 printer. Computer Dell I7 64b and using Elements 9.
View 3 Replies View RelatedUsing ObjectARX2013, I have to solve problems.
When I plot PNG or JPG file, its paper size is needed to edit according to drawing size.
I want to know the source code or function(or method) - C#.
I have tried numerous times to make my paper size and actual plot size the same. My paper size is 24 x 36 but for some reason it rotates the paper and the output is 36 x 36, every time! When I look at it on the preview, it looks correct but then the paper comes out with a foot of paper at the top of the drawing. I've created new page sizes, etc.
View 9 Replies View RelatedIm currently using Autocad Architecture, is it true that Autocad Architecture creates a bigger file size compared to Revit Architecture? Lets say that same structure and components are created.
View 3 Replies View RelatedI`m using AutoCAD2004 with HP Designjet 800 Plotter.
The Plotter is connected to network.
I want to add some Custom Paper Sizes, however, when I open the options for the plotter(User-defined Paper sizes&calibration), I can`t add or modify paper sizes. The `Add` button is not available.
I set my computer to `Power Users` but still cant add. How to make the `Add` or `Delete` buttons usable?
Trying to change the printable area of custom paper sizes?
I've plotter that allows me to create 5 custom paper sizes for each pc3 file, however after create them, i cant always access to change their printable area, you know adjusting their margins, and the strange thing is that this error doesn’t happen all the time,sometimes after a while trying they work, but just for a couple of times, after that the problem remains.
autocad.png
To be more clear, you can see on the image that it doesn’t recognize the custom paper size i have selected, however it works from time to time, allowing me to edit those margins, and after save them, they work just fine and i can use those paper sizes with no problems.
I've tried to edit the pc3 file through windows, and a message appears saying that an unknown error has occurred.
I'm using mm, and i want to create a custom scale which is not in the list of my standard scale in the viewport properties. If i want 1/200 for example and this is not in the list how do i set the custom scale?
View 4 Replies View RelatedI have a prob with the Paper size and the Cell Size not matchng in LR4 using a Sony UP-DR150 printer.
I'm running on Windows home premium 64bit,
i have installed the Sony 64 bit printer driver.
When i print the photo, it prints to the size 4.31 x 3.12 on the 5x7 paper.
Any way to print sheets from AutoCAD onto one sheet of paper, side-by-side?
The reason this came up is because yesterday I printed a half size set on our new plotter using twice the paper I needed. Each sheet printed on half of a 36”x12” sheet of paper (print is 18”x12”). I was throwing away 18” per print. What would be awesome is to be able to get another print onto that wasted 18”.
how to get two (or more) prints on one sheet of paper?
in paper mode
the space outside space is white in color
and i can not find the way to change it into black and can not change it in option-->drafting
I have created a block in the model tab with the annotative scale set at 1'-0" = 1'-0" with the UCS set to World. When the block is inserted in model space either on the model tab or thru viewport it displays and prints correctly. However when the same block is inserted into paperspace on a layout tab the block appears correctly but when printed either hardcopy or PDF it is rotated 90 degress around its insertion. This malfunctions the same whether it is inserted directly or nested in a legend block.
It is also not one particular block or drawing but (mal)functions across drawings and block definitions.
I really don't want to have to make two sets of blocks for the project.
I am making an independent film. And I've decided to use Photoshop to make the Poster...but theres one problem. We'll...3 actually. Hopefully someone could help me out and I would greatly appreciate it. Even if you can only answer one, I will still greatly appreciate it.
1. What would be the coordinates if you want to make a Poster?
2. How about a full paper. What size does the Photoshop picture got to be to fit a piece of paper perfectly?
3. How about DVD covers? Either just the front or the front and the back.
I have found that since installing the service pack for 2014, xclips in paper space have become blank, or, on occasion, 1 will show, but others won't. The invert still works, strangely enough.
View 1 Replies View RelatedI can select mtext in paper space to edit it. I can create a new text object and select it but I am unable to select existing mtext objects. Audit and recover does not eliminate it. Everything is at 0 elevation. The only to select it is to write block the entire drawing out. That gets sort of inconvenient. Is there a variable that is getting set like the imageframe variables that prevents me from select the text?
View 4 Replies View RelatedTrying to finish someone else's half finished project done in acad 2007. I'm working in Architecture 2009. I just opened a sheet template, xreffed the file into a viewport, and whenever I switch from model to paper space or back I get this message-
Cannot find the resource string number 25900 in resource AecXDisplayPropsData50-
I have the next problem with PDF printer:
I have configured a special size and assigned to a PC3 file
(1350.00 x 1050.00 mm.)
This is the default printer for some other layouts in some other DWG's as well.
If I print the layout directly from the drawing editor, it creates a PDF with the paper size I assigned, but if I print it using the sheetset, it creates a document with another paper size based on I don't know what.
The plot and publish details window shows the next message when printed from the sheetset
Sheet: BA_00-P-050-0100___ - Plotted
Page setup:
Device name: DWG To PDF.pc3 - plotted to file
Plot file path: ...DesktoppublishBA_00-P-050-0100___.pdf
Paper size: ISO full bleed B0 (1414.00 x 1000.00 MM)
I cannot find the mistake.
How do you change your paper size? I'm not given the option in the drop down box:
Page Setup - 0.jpg
I have too many paper sizes in PageSetup. This makes choosing the proper page size too lengthy and time consuming.
I only use two paper sizes namely A4 and A3 so I don't need to have English paper size like 11x14 in, Hagaki, Index Card and 30 other pagesetup.
How can I delete or get rid of unnecessary paper sizes?
I installed a new printer Officejet 7500A recently. Strangely that the A3 paper size appears in the Plot dialogue box is 425x302mm. Tried many hours to re-configure the Properties with no success.
View 9 Replies View RelatedI've just set up a PS plotter as per this link: URL....
Hatches in AutoCAD are being displayed really poorly (see attachment)... Basically they've been simplified to polygons instead of complex regions.
And secondly, my plot is cropped to paper size. The work we're doing is significantly larger then typical paper sizes, I realize I could add a new extremely large paper size, but is there a way to ignore the paper size?
We've been working with adding schedule tags in paper space for objects nested within an xref. The first time you do this however, the manual properties (it seems) do not update if the value of the manual property is changed back in the xref dwg. However, the Automatic properties do seem to update.
When we initially found this we past it off as a limitation. However, one of our users was experimenting and found that the first time you tag the xref resident object... the schedule tag reads the correct manual properties value. However, If you remove the property set from the schedule tag... then the manual property will update correctly showing the current value as it is back in the xref dwg even if it is changed.
This makes complete sense as the manual property set data can be edited from either the tag or the object or from the schedule... IF THE TAG and the object are resident in the same drawing file - in this case you DO NOT want to delete the property set from the tag... if you do this the property set is also removed from the object. However, when tagging objects nested within an xref, then you need to remove the property set from the tag... THEN the manual property will update correctly.
I want to add a new layout to drawing with paper size "A3". this is want i am trying with. We had a VBA script before as shown bellow.
For Each tlAcadLayout In ThisDrawing.layouts If tlAcadLayout.Name = "A3" Then blnLayout = True tlCurMedia = tlAcadLayout.CanonicalMediaName tlConfig = tlAcadLayout.ConfigName oldOrg = tlAcadLayout.PlotOrigin Exit For End If Next With tlAcadLayout .RefreshPlotDeviceInfo .ConfigName = "None"
[Code].....
When working with other drawings I've got into the habit of dropping in my layout using the design centre rather than copying the whole drawing into my template setup. Most of the time this works fine but every now and then my layout will be massively oversized with borders, tables and veiwports all over the place.
My viewport is about 20 times the size of the paper! The paper size is fine and insertion units are set to 0 and I still can't find a solution. The attached image shows roughly the problem I'm getting. I'm using 2010 LT by the way.
I'm trying to plot in pdf many dwg file.
The files have a fixed height but variable in length.
The length of the file I'll take the "scroll".
So i want to create a paper size with a specific dimension.
psv.SetPlotConfigurationName(ps, "DWG To PDF.pc3", "Name of the paper");
How can I do?
Why the paper size won't set to A1.
See attached clip and picture of the printer default setting.