quick/easier way of creating three-line diagrams? I'm working on a map of our main feeder lines and the boss wants three-phase lines done as three-lines, but there's a heck of a lot of it and it doesn't necessarily keep to the orthoganals.
View 4 RepliesHow to develop 2D contour diagrams for noise contour diagrams. If you look at examples essentially it is just taking plotted noise data over layed on top of a particular drawing showing representative noise measurements. From my understanding of creating contours it is a matter of triangulating the data points.
View 9 Replies View RelatedAny experience developing simple contours within autocad files.
View 9 Replies View RelatedTill now i was working with the various mechanical design software but now my project requires to design electrical distribution boards.I am not quite sure about reading the electrical schematics and how it works,so is there any literature available for the same or else
View 1 Replies View RelatedI am trying to draw a yard plan in PS 7 but am not sure how to do it. I am using the rectangle tool in "Paths" mode and even though it will draw a rectangle I cannot see it in the layer. Its all grey and when I hide other layers and just leave the rectangle layer open I cannot see it.
How can I do this? Also how am I able to adjust the line thickness?
How can I avoid getting zeros when creating dimension line with quick dimension command. the Zeros indicates the line itself. how it can be avoided?
View 5 Replies View RelatedI have a number of images which are all mainly line diagrams of equipment. I'm trying to tidy up the images (they were created using xfig years ago) using gimp. The aim is to smooth them out and neaten them up a bit.
An example image would be:
[URL].......
I create a script file to draw 2 lines:
Line 0,1 5.0,1
Line 0,1.025 5.0,1.025
But I only got 1 line. The second line is missing. When I use command to create them, everything is fine. Also if I change to
Line 0,1 5.0,1
Line 0,5 5.0,5
Two lines show up.
I needed to remove a feature line that I used as a break line when creating a surface. When I removed the feature line from the definition of the surface, the grading did not change. It appears the points created by the feature line remain which is why grading didn't change. The only work around was to delete these points.
I noticed the same thing happens when I removed the surface boundary and inserted a new boundary. why these points remain and how to remove when I delete boundary and feature line from surface?
How to add the “CANNOSCALE” on the quick access bar?
I tried to add the “CANNOSCALE” on the quick access bar but sounds it is not on the list of the “customize user interface”!
What I’m supposed to do to add it?
I use windows 8 x64 and I've installed AutoCAD 2014, but error appeared Quick properties only don't show anything, only White color
View 9 Replies View RelatedI am having trouble with getting the quick properties box to display. I have turned the feature on at the bottom taskbar, and tried Ctrl+Shift+P, and changed settings so that it displays to the top-right of the cursor, but I get nothing when I select any object. It used to work on 2012 but not now.
View 8 Replies View RelatedI made my first installation of Autocad 2013 on this computer. Unfortunately the quick access toolbar appears whitened as you can see in the attached picture.
View 8 Replies View RelatedHave recently upgraded to 2014 and can no longer get the AREA of a closed polyline in quick properties. It is no longer an option when customising the quick properties information. I know you can measure area in a number of ways but it was very handy to click on a closed polyline and have the area of that object come up in the Quick Properties window.
how to get the Area of a closed polyline in Quick Properties for 2014?
I am having problems with quick select not working properly in 2013 when I am cleaning up X-Refs selecting hatcing or anything else it does not just delete what I am tring to select it just deletes everything. If I go back to any prevous version of AutoCAD it works fine the only solution i can think of is to reinstall.
View 9 Replies View RelatedTake a look at a sample diagram I've created for my company. I'm torn on what scale or even what units I should be using, since I am not drawing real objects. When I took an entry level class, it was so much easier doing the assignments because we used a scale that made sense based on what we were drawing.
5300_Room_Combination_reduced.pdf
I'm having a minor issue with Autocad 2013 at the moment. I use the Quick Properties box to change a lot of my object properties, but since changing from 2012 to 2013, I have noticed QP doesn't recognise the selection of any objects.
View 9 Replies View RelatedWith QP activated, if I select an object (say an alignment or profile view) on the screen and want to pick its GRIP, I have to click the screen FIRST to get focus back to the drawing window (so two clicks). The same applies to the contextual Ribbon, it takes two clicks to 'press' a ribbon button if QP is activated.
View 9 Replies View RelatedIf i make a Inventor DWG and insert one Assembly with lets say 7 subassemblies i want to color the Edges differend color i the DWG ( by right clicking on the subassembly and properties).
This takes a lot of time especially when i have differend wievs to bloon all of the subassemblies, i have to open the assemblies in the three on by one and change the edge color.
On some computers I have a problem. The down arrow at the right of the quick access toolbar doesn't show. I checked that my interface is not lock too. So to customize the quick access toolbar I have to use the CUI.
I don't know if it's related, but my customize toolbar (from my partial menu) have to be displayed manually each time I start AutoCAD but not my custom tab in the ribbon.
Civil 3D 2013
Windows 7 x64
I've found several people that had this problem through searching, but none of the fixes worked for me. I'm unable to use the quick select feature as it does not list anything other than "multiple". I've tried different files, different selections, repaired the installation, complete reinstall, updated with SP1 and hotfix 3 to no avail. I also have Autocad 2007 with SP 1 installed, as well as Autocad Architecture 2014, if that makes a difference.
create a quick profile using the Points method?
When I am asked for the Profile Origin the cursor is like a standard Windows Arrow pointer and won't let me select a point for the origin.If I use a polyline for the quick profile all works as expected...
IDSP Premium 2014 (mainly Civil 3D 2014 UKIE SP1 & Infraworks with some limited 3ds Max Design)
Win 7 Pro x64, 256Gb SSD, 300Gb 15,000 rpm HDD
16Gb Ram Intel Xeon CPU E5-1607 0 @ 3.00GHz (4 CPUs), ~3.0GHz
NVIDIA Quadro 4000, Dual 27" Monitor, Dell T3600
Sometimes I get xrefs that just seem to drag the system down - also on high end systems. This especially happens if I start throwing the view-cube around. Have you got any tricks on how to make such xrefs more "easy" on the system?
View 6 Replies View RelatedDo a quick print screen of support file search path? Our computer's are set up by an outside source and I believe they did not migrate anything correctly or did something incorrectly. My issue specifically is anything to do with rendering and materials displaying is not working. I just want to make sure ACAD 2013 is looking at all the standard file locations along with our customization files. This is happening on 2 computers that have 2013 installed, all the rest are still using 2012 and this works fine. I tried exporting that profile, but still nothing works for rendering.
View 2 Replies View RelatedIn the properties and quick properties dialog box the drop down box that shows diffrient arrowhead types to choose from have disappeared, and is blank.
View 4 Replies View RelatedFor example, I'm making revisions to a plan and drag a block or xref of the floor plan changes where walls/doors/windows have moved. I want to be able to simply pick the underlying linework as opposed to tracing over each line of said xref/block.
View 8 Replies View Relatedif I select a line, then enter the move command, the line unselects also when I select a line, then hit delete, the line is still there both of these used to work
2013 Civil 3D
I was drawing a lot of lines with the pointer that stuck at the end of the line and after that it stuck at the beginning of the other line (i hope you understand what i mean). I don't know what i pressed but now this function is not active and is very difficult to draw the lines.
View 3 Replies View RelatedI'm out of practice with Corel since it has been several years since using it. I'm trying to create a point on top of a line without adding a point to an existing line but for the life of me I can't figure out how. I know I can create a new line and drag the points to where I want them on the line but I just simply want to create a point on top of the line.
View 10 Replies View RelatedI need publishing a PDF from a Word document full of diagrams created with Adobe Illustrator CS6. My diagrams are all vector. I am free to export them anyway I like. My Word doc has many cross-references, footnotes and Endnote references and a large table of contents. It is a few hundred pages long, with around 50 diagrams. I would like to preserve the original quality of the vector art and the intra-document clickable links.
Each step in the process has multiple possible paths, and each path often many options. There are 3 steps:
1) Export from Illustrator to: .ai, .pdf, .eps, .wmf, .emf
optional 1b) Convert (eg. use Acrobat to convert .ai to .doc, .eps or .ps)
2) Import to Word: drap and drop, file cut and paste, insert picture, insert object, insert object linked to file, PDF Reflow (Word 2013). I tried them all.
3) Publish to PDF from Word. Many different paths...
- Print to PDF: I have AdobePDF, PDFCreator, NovaPDF printers installed
- Save as... : Save as->AdobePDF or Save as->PDF or XPS
- Plugin toolbars: Acrobat->CreatePDF, NovaPDF->Save as PDF, PDF Architect->Convert
or
- Save as .doc and convert with Adobe Acrobat.
I have tried many different permutations. There are 4 possible errors:
E1 - The diagrams are converted into bitmaps.
E2 - The diagrams are 'linearised' - curves are converted into chains of linear sections
E3 - The diagrams are corrupted - text missing, characters changed, dotted lines become solid lines etc.
E4 - Hyperlinks are lost.
Here are some results of my tests.
I see no difference so far between Word 2007 and Word 2013. Results below stand for both.There is no difference between Word->Acrobat->CreatePDF and Acrobat->Convert Word to PDF.Illustrator -> AI -> Acrobat -> Word almost works, but diagrams are corrupted in various ways (eg. dashed lines become solid).When export from Illustrator as EPS level 2, EPS level 3, EMF, WMF and PDF and get different results depending on the path to PDF:
No links preserved:
Word->Print to AdobePDF: Good: eps2, eps3, emf Bad: PDF (E1), wmf (E2)
Word->Print to PDFArchitect: Good: eps2, eps3, emf Bad: PDF (E1), wmf (E2)
Word->Print to PDFCreator: Good: eps2, eps3, emf Bad: PDF (E1), wmf (E2)
Word->Print to NovaPDF: Good: - Bad: eps2 (E2), eps3 (E2/E3), emf (E3), PDF (E1), wmf (E2)
Word->Toolbar->PDFArchitect: Simply prints with current postscript printer. One of above.
Links preserved:
Word->Save as AdobePDF: Good: - Bad: eps2 (E2), eps3 (E2/E3), emf (E3), PDF (E1), wmf (E2)
Word->Save as PDForXPS: Good: - Bad: eps2 (E2), eps3 (E2/E3), emf (E1), PDF (E1), wmf (E2)
Word->Toolbar->Acrobat: Good: - Bad: eps2 (E2), eps3 (E2/E3), emf (E3), PDF (E1), wmf (E2)
Word->Toolbar->NovaPDF: Good: - Bad: eps2 (E2), eps3 (E2/E3), emf (E3), PDF(E1)
So, only the "Word->Print to PDF" pathways provide good quality vector diagrams, but none of these preserve intra-document links.
I have:
- Adobe Creative Cloud CS6 (Illustrator, Acrobat etc. all latest versions)
- Word 2007 (latest version (SP3 12.0.6683.5002))
- Word 2013 (Office 365 latest version)
- Access to a Mac with Word 2011.
When I'm editing in a 100 +photo folder from a sports event it takes alot of time moving from one photo to the next. I was hoping that there is a short cut or some keyboard short I can use to save time.
Let me be specific what I am refering to : I open folder 9 year old baseball which has 150 photos in it. I open jpeg 122 in photoshop and make my modifications and then save it. NOW, I have to go back into photoshop, open the folder again, either scrool down with the slider bar or by using the arrows to get to jpeg 123 to begin the next modification. This process becomes a pain and takes alot of time. Is there a way to avoid going back to the folder and using the vertical slide bar or arrows, maybe theres a way to use a keyboard shortcut to advance from jpeg 122 to jpeg 123?