Thousand separator for the dimension.
I’m wondering if there is a way to have the dimensions written with thousand separator. For example, the number 23569 will appear like 23,569?
Is there such option in the AutoCAD?
I'm using VBA to create a special toolbar, how i add a separator using the addSeparator method/
Set ObjToolbrItem = ObjToolbr.AddSeparator(1) dose not seam to work?
How could I add a separator in a PopMenu?
I have a PopMenu as below.
I want to add a separator between the menu.
How do change the decimal separator from point to comma(in model and FX-parameter)
View 1 Replies View RelatedSo I've got a couple thousand PSD documents that need to be manually cropped down to best encompass the subject. Since I am unable to find a script that simply opens up the next document in the folder and I would have to manually find the next file each time (remember that files are unselected in Finder after having been saved), which would prove to be quite tedious.
View 6 Replies View RelatedMy sisters photo collection is a total mess without any rational system to it. Its just illogical structured with folders with generic keywords and thousands of files within each folder. For example, there it's a folder called "travel" where she has just dumped thousands of single files from 10 years of vacations. Not the mention the "various" and "misc" folders.
What I am trying to do: It does seem like all the photos have the correct EXIF data on them though. So what I'm looking to do is to restructure the collection in folders (with dates taken from EXIF) in a manner similar to this:
"/various/filename.jpg" ---> "/2012_06_25/filename.jpg"
"/friends/filename.jpg" ---> "/2012_05_01/filename.jpg"
and so on.
At least then it gets some kind of chronological structure to it. I want to physically organize the files, not organize them through a database.
What is the best approach for doing something like this? I guess I could just batch rename everything from the exif data with Bridge and then organize it from there - but this will still be very tedious. There must be a better way (any PS/Bridge scripts that can do this? The more automated the better. I use Bridge and I dont have LR - but if LR can do this it *might* be whats finally pushing me to buy it.
I am trying to batch convert several thousand TIFF files to lossless JPEG-2000, but I can't get it to work.
When I open a single file and "Save as" JPEG-2000 with the lossless option checked, the result is truly lossless. But when I record this as an Action and then Automate/Batch this action, the output is not saved as lossless.
I think that "treat '.' as a keyword separator" checkbox on the preferences window does not work as expected.I want to create keyword hierarchy with this option when importing, but Lr does not separate keywords entered with dot between them.
View 5 Replies View RelatedI like to have my own Command Bar for favourites but the Separator in User Menus can't be selected. In All (Show All Items), there is a ghost of it but it disappears from the list when I try to select it. Not a big deal but I would like to use it.
View 7 Replies View Relatedwhen I draw a shape and add a dimension to it, the text and the numerical and the arrows of the dimension are small, so I have to increase the text height manually
how can I make it automatically scale itself?
also similiar thing with the lines, I tried putting a dashed center line on a shape, it looks solid but when I zoom it it does not.
how can I solve this?
Exclamation mark with the dimension!
I’m wondering why I got exclamation mark (!) with the dimensions! I wanted to get rid of them but sounds that there is now way to achieve that. I tried to right click the exclamation mark (!) and choose the “reassociate” but with no effect!
Software: AutoCAD 2014, AutoCAD C3D, AutoCAD M3D, Revit
Windows 7 (Ultimate 64 bits),
Firefox 20.0,
Kaspersky 2013.
We are having an issue with Dimensioning and the Primary Units not maintaining the correct value. We use metric so the multiplier of 25.4 or .039370079 for Dim Scale Linear would be used in our Dimension Styles depending on if we are drawing in model space or annotating in paper space. We have created specific Dim Styles for Model and Paper space. Every so often some of us will us the Dim Style for paper space and a metric unit would be shown. When we go into the properties of that dimension and change the Dim Scale Linear to 1 it shows as a different dimension then it actually is. After looking at the correct dimenion, we noticed the Dim Scale Linear shows .9449 but gives the correct dimension.
Note: We are drawing in Metric a multiplier of 25.4, our dimensions are done in english. A scale factor of .039370079 is used to accomplish this.
There is a simple fix with Match Properties but it still doesn't answer why our dimension show up wrong with a different multiplier for Dim Scale Linear.
When I am trying to dimension a room in AutoCAD 2014 the dimension looks like a solid rectangle, with no text. I am dring in Architectual mode using the default template.
View 4 Replies View RelatedI want to make my dimension numbers SOLID.
They are currently just an outline..see attached.
I used direct-distance entry to place the dimensions 3/8 away from the object lines... needless to say, while most horizontal dimensions are 3/8 away, the vertical and inclined dimensions are not. see attached. other than creating construction geometry and physically moving the endpoints of the arrows to the correct location, is there any way of getting this precise and correct the first time i do it?
View 1 Replies View RelatedAssociative property of the dimension,I’m wondering if there is a way to “reassociate” the dimension without moving it.
For example, in the attached screenshots, the dimension is moved downward and then it aimed to re associate it with the object it measures. After the association the dimension is moved toward the object. What I wanted is to re associate the dimension to the object BUT to keep it at its current location.
I am trying to dimension a line that is not parallel to either they x or y axis. When i try to demsion the line it will only let me dimension the vertical or horizonal component and not the diagonal length. I have included a picture of what I am reffering to.
View 2 Replies View Relateddimensions are to small to read in model space, paper space and plot preview.
see attached drawing
The dimension arrws are not printed even though it is shown properly in print preview. I though that it was too small to be shown on print but eventually I do not think that this is the case
View 1 Replies View RelatedI am used to entering my fillet radius dimensions in the command line with [F]illet, [R]adius, then entering a value.
However with 2014 an extra prompt has been added (or enabled) which would mean the path was [F]illet, [D]imension, [Radius], value. I was getting frustrated with this and tried fiddling with the settings ([F]illet, [S]ettings) but could not sort it, and now when I do go to enter a dimension the only option I am left with is to "Select fillet arc", meaning I have lost the ability to enter a value in the command line.
How do I regain the ability to enter a numerical value for a radius?
Is it possible, when I dimension, to have decimals in apex?
View 7 Replies View RelatedI just made an object, specifically, a rectangle with 6 units of height and 30 of long. Now I want to write text in the middle of the rectangle, I was able o find the middle point using osnap and a diagonal line (the point would be 3 units of height and 15 of long) but when I start writing text (with dtext) the text starts writing from that middle point to the right, If its a long text its not in the middle it starts in the middle :/ what can I do so the text will be exactly at the center?
View 5 Replies View RelatedJust upgraded to Autocad 2013 and I've noticed that if you click a dimension then right click the "dimension text position" is missing. Also double clicking it to get to properties, under text position I don't get the option to change to sat centred or above line. how to get it back. I've switched to classic view if this has any effect.Inventor 2013
View 8 Replies View RelatedI'm having a dimensioning problem, and it doesn't seem to matter if it something I have created or something a customer has sent to me.
When I attempt to dimension a circle, I get the following error message:
Select arc or circle: Object selected is not an arc, circle or polyline arc segment.
A few days back, I got this error message, and when I came in the next morning, I was able to dimension the circle.
Windows 7 SP 1
64 Bit.
Inventor 2013
ACAD Mechanical 2013
This week I have been rebuilding some of my custom menus in CDX6, but I could not find the Separator to add to my menu/toolbar. It was not listed under the Commands>User Menus where it should be...well at least I thought it was not there. If I mouse over the list I can see the text pop up intermittently.
I also checked via the All (Show All Items) command list. The space is there but the text for it is wonky. I caught a couple of screen shots to show you what I mean...
Is there an equivalent to DIR-SEPARATOR for search paths?i.e. the return from (gimp-gimprc-query "script-fu-path")As the path separator is different on Windows and Linux (and who knows what on Mac)
View 16 Replies View Related>In our Autocad we show the dimensions in drawing by parallel lines pointing from start and end point.
Attached Image : 01
>But we want to show the dimensions as following. Currently we have to draw these lines manually.
Attached Image : 02
>Is there any setting/option to show the dimensions automatically marked by orange circle shown as following.
Attached Image : PDF file
Software : Autocad 2012-64Bit , Autocad_LT 2012-64Bit
Hardware : Workstation Dell Precision T3600
Trying to place this dimension text. Is there any circumstance that someone would want the leader to be the final result of this animation?
Of all the ways to generate a leader (when the correct one to the center of the dim can't be generated), the extremely acute angle version doesn't seem like the best option.
I am as-building some model space drawings. Client wants model space. I am trying to determine how to size the text and dimensions.
Ex: drawing 1/2" =1'-0", I scaled the drawing bdr up 24 times. What is the right sizing for text, dims. Arrows to get 1/8" text, etc? So far the arrow heads look to tiny.c
I have a huge problem with my Autocad 2013 for MAC, everything is running nice and steady except for one detail, everytime I open the dimension style format to make a new dimension style, autocad freezes (only autocad, rest of my mac keeps working normally) and I cant work anymore, I have to force quit the program and re-open it, but the dimension style I created gets lost. is there something i can do? i already tried by uninstalling it and reinstalling it and this problem doesnt go.
also im new in this discussion groups so if this topic doesnt belongs here let me know before deleting it so i can put it where it belongs
What is the ideal dimension style setting for metric say 1:100 scale. See my setting on the attachment.
View 8 Replies View Related