Prior to the latest drawing editor crash, the display in my LAYERS toolbar would always display the layer of any single object that I would select without a command being active. After recovering, I find that this feature no longer operates.
View 1 RepliesWhen I set a layer as current, every object or line I select in the drawing appear to be on that layer in the toolbar. Although in the properties toolbox, I see that the line I selected is still on the right layer.
I can't work in paperspace either, when I freeze a layer it freezes all objects. It seems like whenever I give a different layer to an object, it attributes to all object that same layer.
When I open the same drawing in acad 2008, everything is ok, the objects have the proper layers.
Is there a command for that or it's an acad 2013 problem?
How do I get back this information on a selected object? (I tried to speed up a laggy ACAD of a friend and switched off too many things, obviously...)
Used Version: AutoCAD 2011
Untitled-1.jpg
I'm having issues with Civ3d 2013. I pushed off upgrading from 2012 because of the format change and the service pack release. I was hoping little glitches would be fixed.
Here are the a couple of glitches to date that I have seen no resolution to in the long list of threads.
1. Layer filters do not filter, unless I have checked "Apply filter to toolbar". The problem is, I dont want to apply them to the toolbar.
2. Publishing to PDF - when set to lines merge (set in the page layout and the publish setting), the wipeouts dont work, and the background masks on leaders makes a faint border around the text in the PDF. When set to overwrite, to get the wipeouts to not print to the PDF as a big black blob, they have to be on a layer set to color 255. I can work around most of the wipeouts, except for dimensions because the background mask doesn't seem to take.
Ok so in previous version if you have an object selected, and hit F4, ( to urn on and off Wireframe display). you could have and object selected, without wireframe showing, or showing if you prefer.
This option seems to have been removed, or moved in 2014.
as the subject states, at some point (I believe after uninstalling autodesk 360), our properties tool pallete will not populate info for the selected object. is there a fix other than re-installing from scratch? The installation fixer didn't work, and I've had to re-install twice now for other issues with the software, so it's getting very costly/time consuming to just re-install for these problems.
View 9 Replies View RelatedJust starting to use 2014, and so far not so good. I tend to keep the Properties Palette open and docked. In 2014, if my current layer is 0, any object I select in a drawing shows as Layer 0 in the Design tab of the Properties palette. If I change to a different layer, any object selected shows that layer in the Properties palette. If I start a new drawing, enter WALLADD and draw a wall segment, the A-WALL layer now correctly appears in the Layer Manager, but when I select the wall, the Layer in Properties is the current layer, not the A-WALL layer it should have gone on. Also, Quick Properties is on, but doesn't pop up anywhere.
View 5 Replies View RelatedI recently upgraded from LT2013 to LT2014. I never had any issues with 2013, but now seem to be battling with 2014. My OS is Windows 7 Home edition.
When selecting an object and then clicking the properties menu, the properties of the selected object are not displayed, but instead the properties of the selected layer are shown.
In the attached screenshot:
1) My active layer is "AM_VIEWS".
2) The layer of the object that is selected is "MEDIUM".
3) The properties dialog box shows the properties of my active layer and not the selected object.
I am therefore unable to override any settings of the selected object and manually change settings e.g. Linetype, Linetype scale etc.
Using Vanilla 2014, Just recently upgraded to a Win7 pro 64bit box
1. Open drawing file
2. Activate paperspace viewport
3. Open classic layer manager
4. Open layer states manager
5. Selected a layer state defined in an xref
6, Pick Restore
7. Receive the error "The Selected Layer States Could Not Be Restored"
No further information is provided. This process has worked flawlessly on the old machine. What has changed within AutoCAD? Is this a 64bit thing? If I import the layer state directly from the xref or from an exported LAS file, the restore works fine.
How can I display the object data of a layer in table format, with VB.net. or How can I display the attributes of a .SHP file, edit it and also add new point to it.
View 2 Replies View RelatedI'm wanting to know if there is a way to Copy a selected area from Excel and Paste into Autocad and have it as lines and text objects?
Before everyone is entering the information in RED multiple times, once in excel and again in our cad file.
I don't want a data link because we are sending, only, cad files to our customers.
I just switched from Autocad 2007 to 2013. how to display the object snap toolbar? the one with center snap, mid-point snap, etc options?
View 3 Replies View RelatedIn the "MEP 2014 Whats new .." Presentation is available as a new feature: "Display order by layer," What command (s) is meant here?
View 1 Replies View RelatedIf I already have an object selected and then click the "new layer" icon in the layers palette, the object I have selected deselects as soon as the new layer is created. Why is this? Also, it only happens on one of my computers, so I figured it was a setting that I'm missing but I certainly can't find it.
View 2 Replies View RelatedWhen opening the layers dialogue box in AutoCAD 2013 the display does not appear to load correctly, I have had this problem before when executing this command and loaded up the old layer manager, I can't remember what the command is for load this.
Autodesk Inventor Professional 2013 SP2 64-Bit Edition
Windows 7 HP Z400, Intel Xeon W3550 3.07GHz
12.0GB RAM, ATI FirePro V4800 (FireGL)
I work with bridges and get xrefs from our road designers containing hundreds of layers. I'd like to point at an object in these xrefs and get the layer name. Is there a simple way to do this? The way the LAYFRZ-command works, freezing a single layer, I figure ACAD should be able to just return the layer name instead. Does this functionality exist?
View 2 Replies View RelatedWhen i click on the green line has you can see on the image. The layer toolbar wont show me the right layer, like if it's not working. But i can see the right layer inside propreties.
Is there a system variable to ajust to see my layers inside the Layer tool bar?
I am trying to get back some of my work that was "lost" when a crash accured. I had 16 blocks (all the same) inserted into my map at the correct locations. I recovered the drawing but noticed that the blocks weren't displaying. I conducted a quick select for the layer which they're on; it stated 16 items were selected (but they are not displaying). While they are still "selected" I checked the properties & it stated all the correct information (quantity, block name, color, layer, scale, etc...). I made sure all layers associated with the block were not frozen. So it's acting as though they're still in the drawing, but aren't displaying...
View 1 Replies View RelatedPossible to link an xref layer and local layer so they display the same (eg. sync viewport colour, linewieght, line type)?
I insert xref's for my base drawing but legend is on local layers and I would like to be able to ensure that the line colour and linetype always match...
Resizing objects is a mess in CorelDRAW X6 when objects are outlined with Scale With Object enabled to retain proportions after resizing.
None of the tools dealing with outlines (e.g. Contour or even Outline itself) continue to work properly after resizing the object.
I strongly suggest to recalculate outline property values after resizing if Scale With Object is checked. Don't just do it hidden somewhere internally in the object model by applying a temporary scaling factor. Instead actually recalculate the actual property values if Scale With Object is checked.
CorelDRAW Graphic Suite X6.4 @ Windows 7/Windows 8 - 64 Bit, Windows Server 2008 R2, Windows Server 2012
If I drag an effect from the target circle of one object to anther in the layer's panel it replaces the effect along with all appearance. But I want just to add the effect. For example, a layer has a drop shadow and a path, round corners. I want to move the drop shadow from the layer to the path so that the path now has the round corners and the drop shadow. To do this I have to open the shadow effect of the layer wright down its parameters, then create a shadow effect for the path with the same parameters which is a lot of work.
View 3 Replies View RelatedI'm working with 27 artboard in illustrator for one project. I would like to select the object I need to get to in my layers panel and have illustrator "jump/navigate" me to the object where it resides on the artboard. Is this possible?
View 3 Replies View RelatedIt appears that the Layer Filters functionality is broken again with 2013. Unchecking the "Apply layer filter to layer toolbar" disables the function of layer filters in the tool palette.
View 5 Replies View RelatedI have a GIF image that I need to add something to, but I don't want to add it to every single individual layer. Is there a way to add it over or behind the entire GIF so that it remains static while the GIF's frames cycle - like a watermark or something?
Or if not, is there maybe a script-fu that copies and merges a selected layer over every other individual layer automatically, without messing them up?
I know I'll probably have to just end up manually adding it to each layer, (so many layers...).
when I selected a layer in the layers window it's gray instead of blue, and if I try to move around the content of the layer I get that message : « Could not use the move tool because the target channel is hidden »
View 4 Replies View RelatedIs there a way to change the functionality of the layers so that when a new layer is created or a layer is duplicated that it automatically is created below the selected layer? I always organize my files with elements at the top of the document at the top of the layers panel and have them in decending order (unless there is a reason for an object to be above another) so that it is easier to navigate the page. Right now this means I spend a lot of time moving layers up and down which gets rather annoying. I believe I saw at one point that there is a key command for duplicating a layer below the existing one, but I can't remember how anymore. ability to make a blanket change in preferences.
View 3 Replies View RelatedI am writing a code to select an object (crossing) and to stretch it a certain distance on the y axis. This is the code that I have to select the object, but I cannot find what to use to stretch it. I actually found something to scale it, but it is not what I need. With ThisDrawing.Utility
Dim SP1sel1(0 To 2) As Double
Dim SP1sel2(0 To 2) As Double
Dim objSS As AcadSelectionSe
Set objSS = ThisDrawing.SelectionSets.Add("zzadsaaafatt")
' Select the object
[code]....
everytime i start Max 2014 i had to untick the "Display Selected with Edged faces" in the viewport configuration tab...is there a way to untick this permamently?
View 3 Replies View RelatedIllustrator 15.1/CS5 on Mac used to display selected text in reverse and would show handles for text on a path. Now it does neither.
View 1 Replies View RelatedI want to create a group for the object be selected. but the following code doesn't work.
[CommandMethod("gr")]
public static void SelectObjectsOnscreen()
{
//Get the current document and database
Document acDoc = Application.DocumentManager.MdiActiveDocument;
Database acCurDb = acDoc.Database;
[code]....
I am getting the error message 'Path curve is coplanar with or tangent to the plane of the profile curve.Unable to extrude the selected object.'
when I try an extrude this shape around this rectangular shape below.
extrude.gif
extrude2.gif