AutoCAD 2013 :: Selected Layer States Could Not Be Restored
Oct 31, 2013
Using Vanilla 2014, Just recently upgraded to a Win7 pro 64bit box
1. Open drawing file
2. Activate paperspace viewport
3. Open classic layer manager
4. Open layer states manager
5. Selected a layer state defined in an xref
6, Pick Restore
7. Receive the error "The Selected Layer States Could Not Be Restored"
No further information is provided. This process has worked flawlessly on the old machine. What has changed within AutoCAD? Is this a 64bit thing? If I import the layer state directly from the xref or from an exported LAS file, the restore works fine.
View 9 Replies
ADVERTISEMENT
Oct 4, 2013
Everyone at the office where I work is having the same problem with AutoCAD 2014:
1. When creating a new layer state, and selecting all layers and clicking "remove from layer state" and then "okay", upon going back into the layer state, about 80% of the layers have returned and you have to select all and delete again and hit okay, and then go back in and do it again, about 7 or 8 times total before the layer state is cleared out and ready for you to add back just the desired layers. Even if you don't create a blank slate layer state to begin with, whatever layers you delete, once you hit okay and go back into the layer state, most of the ones you just deleted are back.
2. Even more of a problem is that sometimes all the already created layer states will suddenly reassimilate ALL layers in the drawing, and the above process has to be done to all existing layer states.
This takes an enormous amount of time to correct for multiple layer states, which we typically have in a drawing.
View 3 Replies
View Related
Oct 24, 2013
I work for a home builder and I receive the drawings in autocad format. Each house drawing comes in autocad but each floor plan and elevation is represented by a "layer state".
Each of these drawings has 7 to 9 pages and when I want to print each of those pages, I have to do it "one by one" as I have to switch between layer states.
So, each file has a layer state for: basement plan, main floor, second floor, etc. I want to find a way that I can print (convert to pdf), all these drawings, rather than going by each "layer state"
View 6 Replies
View Related
Oct 24, 2012
I have 3 states setup in the Layer States dialog box. I have even edited them to make sure they are setup. But, when I choose one and hit the Restore button, they don't. However, if I go thru the command line, they do work. Is the layer states dialog broken in 2013?
View 1 Replies
View Related
Dec 6, 2013
Most our our plans sets have several (10+) plan sheets, all with the same reference drawings and layer states (properties) setup. Currently, if we need to change a particular color of a single layer, we need to open up all of the plans sheets individually and change the color (or import a layer state). This takes a lot of time.
We are looking for a third party program where we can run a batch program to update the layer states of several similar drawings automatically, without opening each individual drawing.
View 1 Replies
View Related
Dec 5, 2013
Running Autocad LT 2014 on Win 7 64bit..I believe the Layer States Manager/Editor is broken...
I created 5 layers and drew 5 lines in model space. Then assigned each line to a different layer. I then created 5 new layer states. When I edit those layer states in the layer state manager, I turned on only one layer for each layer state... When I got out of the layer state manager and select any of these 5 layer states, all layers are on.. Also when I delete layers in the layer states editor, get out of it, then go back into it, all those layers are back again..
View 3 Replies
View Related
Oct 3, 2013
I was trying to use layer states and layer filters, the way when I use the layer state 1, for example, it will only be shown in my layer panel the layers on/unfrozen for this layer state. I checked the layer management panel and removed the layers I didnt want to be shown from this layer state 1 and hit ok/close, but they're still being showed. So i created a filter, turned it on and saved my layer state with this filter ON, and nothing was changed.
View 1 Replies
View Related
Nov 2, 2012
We recently upgraded from 2006 to 2013. We had a lisp routine in 06 that would reload all the xref's in a sheet so the layer states would update since simply reloading the xref did not always work. Below is the code we used. Now, in 2013, when we run it, I lose all layer states.
(defun c:xrl ()
(setvar "visretain" 0)
(command "_qsave")
(command "xref" "reload" "*")
(setvar "visretain" 1)
(command "_qsave")
View 9 Replies
View Related
Jul 2, 2013
Why is it, when I restore a layer state to a blank drawing, it cannot load the linetypes saved to those layers? I get an error that says Linetypes not loaded and then wind up with a full set of layers all with CONTINUOUS linetype.
If I bring in a block from a toolpalette that has a new linetype and layer, it will create them for me just by inserting the block. Am I missing something??
View 6 Replies
View Related
Jan 18, 2013
I'm having issues with Civ3d 2013. I pushed off upgrading from 2012 because of the format change and the service pack release. I was hoping little glitches would be fixed.
Here are the a couple of glitches to date that I have seen no resolution to in the long list of threads.
1. Layer filters do not filter, unless I have checked "Apply filter to toolbar". The problem is, I dont want to apply them to the toolbar.
2. Publishing to PDF - when set to lines merge (set in the page layout and the publish setting), the wipeouts dont work, and the background masks on leaders makes a faint border around the text in the PDF. When set to overwrite, to get the wipeouts to not print to the PDF as a big black blob, they have to be on a layer set to color 255. I can work around most of the wipeouts, except for dimensions because the background mask doesn't seem to take.
View 2 Replies
View Related
Aug 1, 2013
When I restore a saved layer state in one viewport the adjacent viewport (with a different saved layer state) changes. I also don’t seem to be able to save these edited layer states so that they retain my edits.
View 3 Replies
View Related
Dec 4, 2012
Prior to the latest drawing editor crash, the display in my LAYERS toolbar would always display the layer of any single object that I would select without a command being active. After recovering, I find that this feature no longer operates.
View 1 Replies
View Related
Jan 16, 2013
When I set a layer as current, every object or line I select in the drawing appear to be on that layer in the toolbar. Although in the properties toolbox, I see that the line I selected is still on the right layer.
I can't work in paperspace either, when I freeze a layer it freezes all objects. It seems like whenever I give a different layer to an object, it attributes to all object that same layer.
When I open the same drawing in acad 2008, everything is ok, the objects have the proper layers.
Is there a command for that or it's an acad 2013 problem?
View 9 Replies
View Related
Jun 10, 2011
My goal is to batch plots using VB in Visual Studio 2008, Autocad Map 3D 2010, Win 7 Pro 64. It all works but now I want to apply layerstates.
I am using the example in the dev. guide here: [URL]........
My questions:
1. If you use Option Strict, how do you convert from integer to "layerstatesmasks.color"? VS shows the error "Option Strict On disallows implicit conversions from 'Integer' to 'Autodesk.AutoCAD.DatabaseServices.LayerStateMasks'." I can't figure out the conversion. Are the values documented somewhere? "clientmask" is not in the object browser or the dev. guide.
2. If you aren't sure what is masked, do you turn on all of the options on (on, color, linetype, lineweight, etc.)? Is there a sum of values that means "layerstatemasks.all"?
3. LAS files are DXF format. Do I have to read the LAS to detemine what the user wants?
4. The second argument to .restorelayerstate is the viewport id. The examples use objectid.null. I could have several layouts to plot, and maybe several viewports. Is the process a) Make the layout current, b) activate each viewport, c) set model space current, and d) restore the layerstate?
View 2 Replies
View Related
Jul 3, 2011
I have two viewports in a drawing file. One is for existing and new conditions and one is for existing and demolition conditions. So, I want one viewport to freeze some layers and the other viewport to freeze other layers. After picking and freezing certain layers in each viewport, I created New Layer States - One called New Floor Plan and the other called Demo Floor Plan.
When I click inside one of the viewports and select the appropriate layer state it changes both viewports to the same layer state. That is not what I want. Is it possible to have one layer state in one viewport and another layer state in another viewport?
View 9 Replies
View Related
Apr 12, 2012
I just started using 2012 and have few problems. I do MEP drafting and usually use multiple states within a dwg. we create bases and xref them into the various disciplines. When I toggle between the different saved states within a dwg, the layers in the dwg appear, but the xref layers turn off every time. is the a glitch?
Also i don't know how I turned this on, but there is a blue box that appears on my crosshairs and shows me the different lines that I select.
View 2 Replies
View Related
Nov 15, 2013
in 2012 I saved a layerstate and it shows in the dialog but if I change the stet to another and go back none of the settings are held.
HP Z210 Workstation
Intel Xeon CPU E31240 @ 3.30 Hz
12 GB Ram
Note: Its all Resistentialism, so keep calm and carry on
64 Bit Win7 OS
View 9 Replies
View Related
Jul 20, 2011
I have a Xref with multiple Layer States,
I xref'd it into a sheet with Floor plan Layer States,
nowi want to Xref it in again with the Ceiling Plan Layer Staes.
Just to be clear i want the same Xbase Xref'd in a sheet twice with 2 different layer states. how do i do this????
View 4 Replies
View Related
Nov 19, 2013
At work we have been using layer states to set line weights and colors in multiple xref's for plotting demo and install drawings.
So what is happening is that we continue to receive updated files from other groups and I'm unclear on how to update the layer state to include the new layers that have been included in the updated xrefs.
View 1 Replies
View Related
Dec 12, 2011
issue I'm having in my plot files. The way our office sets up our drawings is that we have a set of base files (which is where we do all our plans and details, etc), and then those drawings get xrefed into a different files located in a "plot" folder that that has our titleblock and viewports of the xrefed base files.
The problem is that the plot files have started to NOT save any of my layer states that are associated with the base files. For example, I have a base floor plan that has demolition, construction, RCP layer states that are toggled with LMAN. But if I open the plot file for the RCP and set up the viewports so only the RCP layers are visible...the next time I open the drawing the RCP layer state is abandoned...now ALL the layers are on and I need to redo the viewport layer states...
View 1 Replies
View Related
Jan 8, 2013
I have been searching for a solution to better manage xrefs. We work with arch. dwgs and they often contain several nested xrefs. While working in our "base.dwg", I need a method to correct the problem of some layers in the xrefs from displaying in the base.dwg when they're frozen in the xref dwgs. VISRETAIN is at 1. What I'm having to do is click on the problem geometry, identify what xref it's in, open that xref to record the layer state(all the layers that should be frozen or thawed), go back to the base dwg, look in Layer Manager to indentify that xref's layers and freeze the layers I need frozen. However, if I open the xref all those layers that should be frozen ARE frozen, but back in the base dwg they are displayed (not frozen). It's very frustrating...espec. when you've got half a dozen or more xrefs in many of their dwgs; which are all multiplied in the base of course so I've got two dozen or more xrefs to sift thru. It's just such a pain. I guess I need a "tip" on how to properly manage xrefs.
What would be neat is to be able independently manage all the Layer States for the xrefs separate from the base dwg's Layer States--meaning they(the xrefs' states) DON'T affect the other layers in the base(or other xrefs). LS Manager lists all layer states and if you restore one of them, it affects the entire dwg. I don't want that. I want the Layer States to control ONLY those states that apply to the xref it was created in. That way, all I'd need to do is click on the xref in Layer Manager(from the base dwg) and restore that particular xref's layer state and be DONE. That way you could manage all your xref Layer States individually (and independently from) the base dwg. Thus, if you make changes in the xrefs you can easily save/restore those states from within the base.
View 1 Replies
View Related
Apr 24, 2013
Can you save a layer state so that if someone gets into my dwg on their PC they can access the layer states the dwg that I set up?
View 2 Replies
View Related
Mar 14, 2012
How can i retrieve the layer states via lisp.
View 3 Replies
View Related
Sep 26, 2012
I am working on a massive project with many x-refs. We are using an STB, along with layer states for line weights. We are plotting from a sheet file, where our, and consultants' drawings, are x-reffed in.
If we apply the layer state in the SHEET file, we will need to know all layers of our consultants. If we apply the layer state in the MODEL file, we will need vis-retain set to 0, and therefore we will need to redefine all of the layers of the x-ref to print grey every time we plot.
Can you apply plot styles around different sheets more efficiently?
Can you set an STB to look at the prefix of layers (ie. every layer starting with XXX, or every layer from a certain x-ref) be a certain plot style (ie. 60% grey)?
View 1 Replies
View Related
Mar 13, 2013
First off, here is what i want to do:
- in model space
- 3 model space view ports (ai_tiledvp 3 "_V")
- different layer state visible in each view port OR different saved view visible in each view port.
I cannot for the life of me figure it out. At the moment, every time i change the layer state (or saved view) in one view port, it changes in all 3 view ports so that they all show the exact same thing.
View 2 Replies
View Related
Apr 3, 2012
I work with a lot of blocks that use visibility states. I've immediately found that editing these in 2013 is impossible because of a bug. When I'm on "Visibility State 1"and select "Visibility State 2" from the drop down, the state just reverts back to "Visibility State 1". The actual block will change and my drawing from "State 2" will show up, but the drop down still lists "State 1". So, when I try to Make Visible an object (in order to put it on "State 2" which is currently visible on my screen), the object is put on "State 1". This needs fixed IMMEDIATELY. This makes Autocad 2013 worthless to my firm.
View 8 Replies
View Related
Apr 11, 2012
I have made up an extensive dynamic block library over the year, however in the latest version when I have tried to modify blocks with visibility states you can not cycle through the different states it will just revert back to the first one.
View 3 Replies
View Related
Sep 26, 2012
Is it possible to select visibilty states of a dynamic block in a drawing, for ex. to count how many of each visiblity are in a drawing?
Ex.:
I have a drawing of a big pile plan with al lot of various piles in there. I made one dynamic block of the pile in which i can select what kind of pile i want to have visible. Now i want to count how many of each pile is in the pile plan.
If all different piles would be different blocks i could easily count with 'Block Reference' in 'Quick Select', but i dont know how to do the same with a dynamic block (which has one block name only) and its different visibilities.
View 1 Replies
View Related
Sep 26, 2013
we have moved from AutoCAD MEP 2012 to AutoCAD 2014 recently using Dynamic blocks with multiple visibility states.
in 2012 we could select a dynamic block with a specific visibility state and select similar, it would only select the visibility state that was previously selected.
in 2014 that is no longer an option WTH?
i have tried a couple of system variables to no avail (pickadd, selectionmode)2014
selectionmode is not a valid SV in 2012
View 9 Replies
View Related
May 8, 2012
When i click on the green line has you can see on the image. The layer toolbar wont show me the right layer, like if it's not working. But i can see the right layer inside propreties.
Is there a system variable to ajust to see my layers inside the Layer tool bar?
View 1 Replies
View Related
Aug 1, 2012
It appears that the Layer Filters functionality is broken again with 2013. Unchecking the "Apply layer filter to layer toolbar" disables the function of layer filters in the tool palette.
View 5 Replies
View Related
