AutoCAD 2013 :: How To Label A Line
Aug 8, 2013I can dimension a filleted line. I want to show total length of filleted line.
View 2 Replies
ADVERTISEMENT
AutoCAD Civil 3D :: Changing Profile Line Label Style Causes Label String To Revert To Default
Sep 6, 2012C3D 2013. We have profile line labels, some of which get manually edited (for example, change the "<[Tangent grade(FP|P2|RN|AP|GC|UN|SD|OF)]>" to a static number such as 0.29%).
However, if you CTRL+Click and select one of these labels and change the style of that one label, then the manual edits are lost and the label reverts back to the default string.
Is there any way to turn this behavior off?
AutoCAD Map 3D :: Line Break In Text Label Doesn't Center 2nd Line Like It Does First
Feb 22, 2012I have an FDO layer which I am styling like so:
Concat ( FDO_LAYER1, Concat ( '
', FDO_LAYER2 ) )
This layer is styled so that all text is centered. In this case, FDO_LAYER2 is having it's text left aligned. I'm pretty sure this is due to the method I am using for a new line. Is there something else I can use to break the line and maintain the center styling?
Using a second point for FDO_LAYER2 is not an option.
AutoCAD Civil 3D :: How To Get Azimuth Label On Line
May 29, 2012how I can get an azimuth label on my line?
View 5 Replies View RelatedAutoCAD Civil 3D :: Feature Line Name To Label?
May 19, 2013I am wanting to add the name of my feature line to a label style. I am trying to create a label style that will show Lot Number and Area. I know i can create parcels, but i dont want to! I have also created a map table that can do exactly what i want on polylines, but will not work on an xref. Labelling featurelines does work in xrefs.
how to add the name into a label style?
AutoCAD Civil 3D :: Line Label Precision
Oct 26, 2011Unable to change line label precision (both bearing and distance).
The goal is N10d10'10"E, 100.00'
Civil 3D 2012 is giving N10d10'10.00", 100.000'
I am using a template with the distance precision set to 2.
The drawing setting->Ambient settings distance precision are set to 2.
The feature settings distance precison is set to 2.
AutoCAD Civil 3D :: Contour Label Line
May 31, 2013I have been creating contour surface labels, which utilize a 3-point contour label line with grips to adjust, and this is my question:
when i create a single contour label, clicking specifically on a contour i want labeled, the contour label line with the 3-grips extends beyond several contours and thus places a label at every contour it touches. i can manually fix this by shorting the line, but this seems very inefficient.
1. is there a setting to have the label only placed on the center grip of the three?
AutoCAD Civil 3D :: Blocks In Line Label Styles
Feb 15, 2012I have a line label style that consists of two blocks (crowsfeet). The blocks are taking on the properties of the current layer when xrefed. I have enclosed a couple of drawings to show this behavior.
Open the "crowsfeet sheet" drawing. You will notice the crowsfeet are green.
Change the current layer and regen. The crowsfeet will change to the color of the current layer.
To take this one step further:
Freeze the current layer in the current viewport. The crowsfeet disappear.
Change the current layer. The crowsfeet reappear with the color of the current layer.
The objects in the blocks are on layer 0 with a color of bylayer. Changing the color to byblock produced the same results.
The only workaround I found was to change the color of the objects in the block to something other than bylayer or byblock.
Civil 3D 2012 SP3 | Win 7 64-bit SP1
Xeon E5-1620 @ 3.60GHz, 16GB Ram | NVidia Quadro 600
AutoCAD Civil 3D :: Dragged State For Line Label?
Jun 24, 2013I have a line label style that I created for labeling bearing and distance. The Dragged State Component for display is set to "As Composed", because I want to just slide it down the line a bit, but have it remain at the same rotation as the line, and it is not allowing me to do so. I also have a label style set up for "Stacked Text" and that works fine when I move it away from its original line I labeled
View 2 Replies View RelatedAutoCAD Civil 3D :: Area In Acres From Line Label
Nov 15, 2012Is it possible to insert a formula or is there an existing expression I could use to calculate area in acres from a General Overall Length line label if I input the width?
View 5 Replies View RelatedAutoCAD Civil 3D :: Delta Z Of Feature Line In Label
Aug 16, 2012I have a plan I want to create a table of feature line (the ones used as ditch cl's) with the designation (ie R1), the overall length (this part I can do) and then the Delta z of the entire feature line. I can get segment Delta z, but not the entire Delta z.
View 4 Replies View RelatedAutoCAD Civil 3D :: Line Bearing Label Expressions?
Nov 15, 2012I am trying to get my bearing label short name spaced to read with a "." after the N & E. Example: N. 00 00 00 E.
View 9 Replies View RelatedAutoCAD Civil 3D :: Line Label Style Expression?
Dec 12, 2012I am looking for a Line Label Style Expression which will perform a rounding function on distance labels that display my "General Segment Length" value.
What I need is to be able to remove "Trailing Zeros" from my distance values, so that if precision is set to say 0.01 and my distance value is measured as 45.5, I do not get 45.50 but 45.5.
I need this to round for:
1 decimal place
2 decimal places and
3 decimal places
AutoCAD Civil 3D :: Label Line Between Two Points Drag State?
Dec 21, 2012Why doesn't the drag state work when adding a line label between 2 points in Civil 3D 2013.
View 2 Replies View RelatedAutoCAD Civil 3D :: Line Label Tags Not Labeling Consecutively
Aug 25, 2011Curve tags number okay but the line tags keep numbers when curves are in between. Happens in both 2011 and 2012.
View 1 Replies View RelatedAutoCAD Civil 3D :: Label Grade In Line In Profile View
Jul 16, 2012I have a regular AutoCAD line in a profile view and wondered if there is a way of labeling the grade of the line. I'd think I could use and expression to calculate it. But I don't know how to automatically adjust for the vertical exaggeration without having to have a separate expression for all possible situations.
View 5 Replies View RelatedAutoCAD Architecture :: Set Distance / MEASUREGEOM Command To Label Line
Feb 22, 2013m in the middle of a little project and want to know if its possible to save the info that the _MEASUREGEOM command displays when applied to measure distance or angle to the project.
I used to use a lisp script to do this but that was on my PC. Im not running autocad on my mac and it wont alow me to run the script. it loads it but then gives the error
error: vl-load-com not supported on "Mac OS X Version 10.8 (x86_64)"
when i try and apply the command. Does MEASUREGEOM have a built in feature to save these details to the project i.e. next to the line or shape measured?
AutoCAD Civil 3D :: How To Label Delta From A Curve To Non-tangent Line
Jun 19, 2012I need to lable the delta of a PI in an alignment where one segment is an arc and the following is a non-tangent line.
Geometry points don't offer delta and Tangent Intersections won't label at PCs and PTs.
Is there an expression that can be used?
AutoCAD Civil 3D :: Line Segment Label Anchor Point
Jan 30, 2013I am trying to create surface elevation labels along a polyline and I am having an issue with the label anchor point. I have created a line label style that uses a reference text to produce the elevation from a specified surface, however when I insert the label the default anchor point for the label is in the center of the line segment and that is where the reference text is taking the surface elevation. I am looking for the elevation of the surface at the start of each line segment, and I do not know how I can make it stop defaulting to the center of the line segment.
Attached is an overview of what my labels look like, where the anchor point is, and the layout properties within my label style. I am using C3D 2012.
AutoCAD Civil 3D :: Feature Line Vertex Elevation Label?
Feb 22, 2010I've seen a label style somewhere that can label the elevation of vertices and elevation points on feature lines. How to style or a procedure for creating a style for this?
I've found a couple of blogs that layout the steps for a style but it seems there are a few ways to do it so I'm looking for what could be considered the most effective/versatile approach.
AutoCAD Civil 3D :: Line Label Macro For Multiple Labels
Apr 12, 2013Is there a way to create a macro to label a line with a particular style?
I label my feature lines with three styles: multiple - segment grade, multiple - segment start elevation & single - segment end elevation. I want to make a macro for each of these that I can put on a button. It would be nice to combine the two multiples too if that is possible.
Civil 3D 2012 SP3 | Win 7 64-bit SP1
Xeon E5-1620 @ 3.60GHz, 16GB Ram | NVidia Quadro 600
AutoCAD Civil 3D :: Setting Up Line And Curve Label Style
Jan 26, 2013We are upgrading from LDD2008 to Civil3D 2013. I'm working on a Civil3D template
I'm setting up line and curve label style. Oringally we were going to have one set of line label style. Ex. Bearing Above or Bearing Below. After seeing that the line labels does not look at the current text style we decided to make copies of the original label styles based on Text Styles.So now I have Bearing Above60, Bearing Above100, etc. I named them based on the Leroy styles and sizes.
After editing each one and changing the Text Style each one looks at, it is not using the Texting Style i assign it. I'm doing this in the General Tab and Text Style for each label style.
i guess I should have tested before creating all them to find out it didn't work.Does it need to be done somewhere else or is do I have to do something with the overall label style overrides?
AutoCAD Civil 3D :: How To Put Return / Break To Another Text Line In A Label
Feb 27, 2013How to put a (Return) or Break to another text line in a label? Usually it is one big long label on one line.
View 4 Replies View RelatedAutoCAD Inventor :: Section Line Terminator And Label Missing?
Jul 30, 2013I have a section line that is missing one of the teminator arrows and the label.
I have checked the styles, tried to edit the style but cannot make the terminator and label visible.
Inventor 2013
Win7 x64
AutoCad :: When Select Add Static Labels And Line - Label Is Gibberish
Jun 14, 2011I'm using Autocad 2004 with LDD. My text style is set to Standard with simplex.shx as my font. When I select add static labels and select a line, the label is gibberish. I have tried different fonts but have the same results, gibberish.
View 5 Replies View RelatedAutoCad 2D :: Dimension Line As Label And Marking Intersecting Lines
Sep 11, 2012I have recently starting using dimensions lines with overwritten text to label items (as it is a quick way to label multiple identical items).
What I'd like to add is a mark (like an architectural tick/oblique) each time the dimension line intersects one of the items.
AutoCAD Civil 3D :: Where Is Setting For Sample Line Label Background Mask
Jun 17, 2013Where is the setting for the sample line label background mask? I have some sample lines that will be plotted on top of an aerial photo, and the black box background looks terrible. I'd like to turn it off. I found the contour label background fine and I switched those to False without much of a problem, but I can't seem to locate the ones for the sample lines.
View 1 Replies View RelatedAutoCAD Civil 3D :: Edit Parcel Line Label Style For Precision
Apr 24, 2013I'm trying to edit my label style so that the bearing has no decimal places and the distance has two. I thought it would be similar to editing the contour label precision but it doesn't seem to be that way.
View 3 Replies View RelatedAutoCad :: Auto Label Every Line Length Of Schematic / Displays On Drawing
Jul 3, 2013Is there a way to auto label every line length of a schematic so that it displays on the cad drawing? Sort of like using the linear dimension tool but for all available lines of a layer or line within a drawing.
View 3 Replies View RelatedAutoCAD LT :: Macro To Place A Label For Lengths Of Lines At The Center Of Each Line
Nov 6, 2012If I have a series of lines on a layer, is it possible for a macro to place a label for the lengths of the lines at the center of each line in AutoCAD LT 2012? Adding a DIMLINEAR to each line is for the birds....my drawings have as many as 250-300 lines that need to be labeled with thier lengths.......
View 9 Replies View RelatedAutoCAD 2013 :: Block With X / Y And ID Label
Sep 13, 2013I want to create a block that will show x and y coordinate values and also an ID tag which will update ie ShaftNo 1, ShaftNo 2 etc as I add them to a drawing.
Reason: I have hundreds of centre points of old mine shafts on my drawing which I need to identify so wish to create a drawing and excel sheet which will show the number of the shaft and also the xy coordinates.