I want to create a block that will show x and y coordinate values and also an ID tag which will update ie ShaftNo 1, ShaftNo 2 etc as I add them to a drawing.
Reason: I have hundreds of centre points of old mine shafts on my drawing which I need to identify so wish to create a drawing and excel sheet which will show the number of the shaft and also the xy coordinates.
I wonder if this can be done. i have a number of blocks which have labels to them i.e. JW1, JW2, JW3 etc. which corresponds to the block name. Is it possible to have the label automatically referenced to the block name so if i change the block name to JW10 the label within the block changes to JW10 as well.
View 4 Replies View RelatedI have made dblink to database table and attach field from the row to the block label with value = 150 In the same block i need to have block hyperlink with adress like : [URL] To be clear, I need in my hyperlink to include the value of label
View 3 Replies View RelatedIn the Sheet Set Manager, in the Sheet List tab, if you click on the project name and Righ-Click and select Properties, you can see the file to be used as the Label Block for Views. It appears that there can be only one block chosen.
I would like on our Enlarged Plan drawings to use another block.I made a subset for these Enlarged Plans, but Right-Clicking on it does not offer a place to specify a different block.
Is there anyway to have a different block for a subset of drawing?
I have hyperlink in the block, and block label with some value,which changes from time to time.
I need in my hyperlink to include the value of label,something like [URL] ........
So how to extract the label value and use it in block hyperlink?
This is what I'm trying to achieve, except with a Civil3D label.I want to add the circle with the typical detail callout to an alignment label. I can format the text just fine, but can't figure out any way to add a symbol to a label. For example, I was thinking I would create a "water meter" style with the correct number for water meters, so there would be a block or something attached to the label.
View 8 Replies View RelatedI was wanting to know it it is possible to get a block component out of a pipe label with the API to project onto a profileview.
The reason a want this is that to label lot connections in the form of a wye connection I typical use a pipe label with a stick block at 45 degress to represent the connection then explode it and use project to profile view command so the lot connection applies there as well. Just wanting to do it faster thru using code if it can be done.
Have a number of std blocks with a single part number located centrally within a circle similar to std grid line coordinates used on architectural plans.
Is there a simple way to set the block up with its part number fixed centrally so that when the block is inserted at different rotation angles the part number always appears central within the circle and upright.
Forget lisp as only have LT.how to centralise the text within an attribute so its always central when block is rotated.
I have a dynamic block with several look-up values for the polylines width and I'd like to label them (as a text in the drawing over the block), and be able to move this label where best fits. I've being trying inside the block, but then it can't be moved outside of it. I tried MText with field outside the block, but it has to be applied in many one by one.
Should I use the block itself (how?) or there is a lisp for this? I have a lisp for bearing and distance for lines, which places the bearing text above them and the distance text below those lines, no matter what angle is. It will place in the middle and in the same angle as the line. I edited this lisp file, but how to change it for my purpose, as I don't understanding all the codes inside of it.
Level label for displaying the plus heights in facade and section that is dynamic. I want to insert the block in 0,0,0 and then when i copy it i want it to change the level hight automatically.
View 6 Replies View RelatedI have a block tha I use in a point label style. All of the block entities are on layer 0. The label style is also set to layer 0 so that it get on the same layer as the point. I've tried setting the block color in the label at by layer and by block. When a drawing that contains this label style is XREF'ed into another drawing, the block in the label always takes on the color of the current layer.
C3D 2011, Version 3
edit: I attached an example. The top figure is the point with the block in the label and the bottom is just the block itself.
If you have a look at the attachment you will see that many of the labels for risers have their text labels hidden, if you highlight you can see that the riser label block is highlighted as well as the hidden text. If you click on them you are able to modify the text but I have been unable to work out how to make the labels appear in this drawing.
If I cut and paste into another document I can get the label to appear but I can not work out how to make the labels appear in this document.
Using this
(setq nblock (vla-get-Effectivename(vlax-ename->vla-object block )))
I get the effective name dynamic block.
(if (nblock (= "test_block"));;;--->Which is the correct form? (command "_insert" "LABEL" pt1 "" "" "") );end if (if (nblock (= "test_block2"));;;;Which is the correct form? (command "_insert" "LABEL2" pt1 "" "" "" ) );end if repeat for all enames block
How i can select block to insert according to effective name?
We use a number of blocks with block tables for data extraction here, and whenever one of the blocks is modified and updated, all of the block tables reset to the default value. This happens for any block reference change, not just changes to the block table (which makes sense that it would reset).
How can we update these blocks without having to manually change all of the block tables afterwards?
I am in the process of fixing one of our dynamic blocks. It's a fairly simple fix where there was a typo in one of the names of our items in the lookup that needed to be fixed.
I changed the name of the item in the lookup table. I went and did the test block and it seemed to work fine, but when I bring the block into a drawing, it reverts back to the old lookup as if I did nothing at all.
I made sure that the path was correct and I even just dragged and dropped straight from Windows Explorer to no avail.Does AutoCAD keep referring to the old block? Did I forget to change something else?
my problem is whenever i make a new block a stretch point appears even if its not a dynamic block . also its not a stretch point, because when i click on it, it just move the block , and it always appear on the coordinates 0,0 it cause me a problem when I insert the block , autocad use this point as a base point , and its very far from the real block .
View 1 Replies View RelatedI have 2 drawings with the following content :
Drawing 1 : Contains tree blocks that have a specific scale dependant on the tree size
Drawing 2 : Contains a block with just a point and attribute data about the tree (name, size etc.)
This block is approximatly at the same location as the tree block (0,1 m precision)
Problem I want to join these two items together. In other words, in the tree block that is scaled correctly i want the attribute data with the name, size etc. These blocks don't have a corresponding unique number or something like that.
I can dimension a filleted line. I want to show total length of filleted line.
View 2 Replies View RelatedWhen I have AutoCAD open and I want to open a previous .dwg I have named and saved, why doesn't the .dwg name appear on the .dwg name label after it's open? It just says drawing.1 or drawing.2.
View 3 Replies View RelatedThe attached image show the annotation title style and the label on center line (the red rectangles).
View 5 Replies View RelatedI think we keep on without an annotation symbol to label the x,y and/or Z of a point ? Have I to develop our symbol ? I'm going to create my own symbol. Using attributes & dynamic behaviours I can do it.
how to get my arrow rotates (I move the box and I have - the arrow aligned with line1 and line 2 horizontal).I don't want to use parametrics, because I want to have a symbol compatible with versions prior to 2010.
Is there a way to get a filename label in the title block??
At the moment filepath label is used, but this path is too long for the small space we have.
I have only found 2 posts on this subject, but both are more than 5 years old.
I'm trying to figure out where to control the section label sets that are attached to the section "entities" when I create multiple section views. It seems to default to 'standard' for all entities sampled. I have created the section label sets that I would like to use for each entity, eg. subgrade, finished grade etc., but don't know where to select it when sections are created. I can get desired results by selecting each entity in a section view individually, but it's very tedious since I will have over a hundred sections views to show with 3 entities sampled each. These sections were created from sample lines across multiple surfaces and not from a corridor. It seems logical that the section label set would be tied to the section style, but I don't think it is. The only thing the section style seems to control is the layer and a name, it's nearly useless.
View 3 Replies View RelatedI have created 8 points (from 4 locations with 2 depths in each location) in _All Points/Points. These 8 points are grouped into 2 Point Groups:
Points #1, #3, #5 & #7 for Point Group - (1) Depth#1 and
Points #2, #4, #6 & #8 for Point Group - (2) Depth#2.
The "Name" of Point is filled with the SampleID (like cdc-ss01-s1, cdc-ss01-s2,...) - see the attached file. From the HELP of AutoCAD C3D 2013, I have read/studies the "Point Tables" and "Point Label Styles" and I cannot figure out how to label the 8 points to show the "Point Number", "Point Elevation", and "Name" of Point (i. e. the SampleID like cdc-ss01-s1 & cdc-ss01-s2, ....).!!
In the drawings for my company, we will list notes along once side of the page using multiline text as a numbered list. Each number corresponds to a label I then use to mark up my drawings. My label is usually some sort of symbol with a number inside of it. Pretty standard. My problem is, when I want to add a note somewhere in the middle of this list, the numbering changes for everything after the insertion point and I have to go through the drawing and update each label individually. On complicated drawings I want to make sure I don't miss updating a label or see if there is a faster way to update everything. Is there a way to have a label of some sorts with a number that automatically updates to match a certain note so if I add a note in between or delete a note I don't have to change every single note?
View 2 Replies View RelatedI went to content browser and loaded the "Plan Elevation Label" onto my tool palette when I go to place the label in the drawing it prompts for elevation and nothing else.
How can you change the rotation on the screen accept to use the rotation command?
The tag itself is referencing a block I went to the block and changed the block now if I go to insert the multi view block it prompts for rotation but not to edit the attribute is there any way to get it to do both?
I'm trying to build a list of surface lable style, (both slope and spot elevation) using vlisp 2013.
I can create a list of the parant, but I can not find the clildren.
my goal is to change a surface label style between the parent and the children, using a list. To many style for the property menu.
The label associated to a grading point when is moved when is moved changes its size automatically and a leader appears. After this happen no control over the grading point and its associate label. refer to the image below.
View 1 Replies View RelatedC3D 2013. We have profile line labels, some of which get manually edited (for example, change the "<[Tangent grade(FP|P2|RN|AP|GC|UN|SD|OF)]>" to a static number such as 0.29%).
However, if you CTRL+Click and select one of these labels and change the style of that one label, then the manual edits are lost and the label reverts back to the default string.
Is there any way to turn this behavior off?
Is there a way to "Edit Label Text" in a Parcel area label? Similar to the way you can edit it in other styles.
View 9 Replies View RelatedI'm trying to label my Profile label stations as raw stations, 20~20 meters, and I'm not being able to adapt the format to STATION 0, STATION 2, without any plus zeros or +, or -, or commas, or anything, as following in the image.
Is there a easy way to do it?