I have hyperlink in the block, and block label with some value,which changes from time to time.
I need in my hyperlink to include the value of label,something like [URL] ........
So how to extract the label value and use it in block hyperlink?
I have made dblink to database table and attach field from the row to the block label with value = 150 In the same block i need to have block hyperlink with adress like : [URL] To be clear, I need in my hyperlink to include the value of label
View 3 Replies View RelatedI need a lisp routine that will allow me to pick a polyline and label with azimuth and distance (direction-north, clockwise) of a new WCS.
Is there any code that extract information for a new WCS?
1) Is it possible to extract data from dwf file in autocad 2012?
2)I need to extract blockNames from dwg file but i dont know how to extract blackNames because text in dwg file may change but pattern will remain same.
I am using Visual studio 2010 and Autocad 2012
Is there a way to access the block libary without opening a drawing?
Or what object would you use to speed up drawing data extraction?
For example in other Cad programs you can open the drawing in a read-only mode or invisible and it speeds up the data extraction.
What would be a similiar method for Autocad 2011.
I need to extract data from AutoCad Drawing using C# or VB.Net.
I have a Title Block which is not inserted using attributes. It has some horizontal & vertical lines drawn to look like a table and text added between them. See the attchment.
I need to extract data from that and display in Ms-Excel or in a datagridview.
is it possible to extract attribute values from an block in an External Reference using VBA ?
View 5 Replies View RelatedIs there a way to extract the cavity (C015-G) from the block on the workpoint of the block
View 9 Replies View RelatedI would like to ask if its possible to extract part of the drawing from modelspace then add title block in lay-out and scale the extracted drawing...how will i do that?
View 9 Replies View RelatedIs that possible to have a lisp to extract the Field Expression of a attribute in a block?Specifically, to extract the property VALUE (TextString) of this attribute.After to extract, I would like to put this text extracted in a different layout tab, in the same drawing. In this way, I will have a text linked to the attribute value between two layout tabs. So, when I have to change the attribute value, the text will be updated automatically.
I know that if I use the FIELD command to manually copy and paste this value it will work, but when I have a lot of attributes it becomes very laborious.
I was wondering if it was the COND statement that I would need to use to evaluate a block to confirm that two attribute tags existed and if so, if would process the block to perform an attribute extraction of both of those tags. It would ignore blocks that only had one or the other attribute tags - and only extract the attribute values if the block had BOTH of the tags present - It could be blank, but it had to exist.
For example, I want to find blocks that have the attribute tag "PART_A" and "ID" - and then create a CDF that has the value of "PART_A" in the first column and "ID" in the second column. Then it closes my CDF file.
Then, I want it to scan my drawing again for blocks that contain attribute tag "PART_B" and "ID" and then re-open that CDF file and append the values so that the values of teh attribute "PART_B" is in the first column and the values of the tag "ID" are in the second column.
I have been playing with the following code --- is there anyway to modify the code to get it to do what I need? I have already removed the part that writes the header-row....
I want to create a block that will show x and y coordinate values and also an ID tag which will update ie ShaftNo 1, ShaftNo 2 etc as I add them to a drawing.
Reason: I have hundreds of centre points of old mine shafts on my drawing which I need to identify so wish to create a drawing and excel sheet which will show the number of the shaft and also the xy coordinates.
In the Sheet Set Manager, in the Sheet List tab, if you click on the project name and Righ-Click and select Properties, you can see the file to be used as the Label Block for Views. It appears that there can be only one block chosen.
I would like on our Enlarged Plan drawings to use another block.I made a subset for these Enlarged Plans, but Right-Clicking on it does not offer a place to specify a different block.
Is there anyway to have a different block for a subset of drawing?
I wonder if this can be done. i have a number of blocks which have labels to them i.e. JW1, JW2, JW3 etc. which corresponds to the block name. Is it possible to have the label automatically referenced to the block name so if i change the block name to JW10 the label within the block changes to JW10 as well.
View 4 Replies View RelatedThis is what I'm trying to achieve, except with a Civil3D label.I want to add the circle with the typical detail callout to an alignment label. I can format the text just fine, but can't figure out any way to add a symbol to a label. For example, I was thinking I would create a "water meter" style with the correct number for water meters, so there would be a block or something attached to the label.
View 8 Replies View RelatedI was wanting to know it it is possible to get a block component out of a pipe label with the API to project onto a profileview.
The reason a want this is that to label lot connections in the form of a wye connection I typical use a pipe label with a stick block at 45 degress to represent the connection then explode it and use project to profile view command so the lot connection applies there as well. Just wanting to do it faster thru using code if it can be done.
Have a number of std blocks with a single part number located centrally within a circle similar to std grid line coordinates used on architectural plans.
Is there a simple way to set the block up with its part number fixed centrally so that when the block is inserted at different rotation angles the part number always appears central within the circle and upright.
Forget lisp as only have LT.how to centralise the text within an attribute so its always central when block is rotated.
I have a dynamic block with several look-up values for the polylines width and I'd like to label them (as a text in the drawing over the block), and be able to move this label where best fits. I've being trying inside the block, but then it can't be moved outside of it. I tried MText with field outside the block, but it has to be applied in many one by one.
Should I use the block itself (how?) or there is a lisp for this? I have a lisp for bearing and distance for lines, which places the bearing text above them and the distance text below those lines, no matter what angle is. It will place in the middle and in the same angle as the line. I edited this lisp file, but how to change it for my purpose, as I don't understanding all the codes inside of it.
Level label for displaying the plus heights in facade and section that is dynamic. I want to insert the block in 0,0,0 and then when i copy it i want it to change the level hight automatically.
View 6 Replies View RelatedI have a block tha I use in a point label style. All of the block entities are on layer 0. The label style is also set to layer 0 so that it get on the same layer as the point. I've tried setting the block color in the label at by layer and by block. When a drawing that contains this label style is XREF'ed into another drawing, the block in the label always takes on the color of the current layer.
C3D 2011, Version 3
edit: I attached an example. The top figure is the point with the block in the label and the bottom is just the block itself.
If you have a look at the attachment you will see that many of the labels for risers have their text labels hidden, if you highlight you can see that the riser label block is highlighted as well as the hidden text. If you click on them you are able to modify the text but I have been unable to work out how to make the labels appear in this drawing.
If I cut and paste into another document I can get the label to appear but I can not work out how to make the labels appear in this document.
Using this
(setq nblock (vla-get-Effectivename(vlax-ename->vla-object block )))
I get the effective name dynamic block.
(if (nblock (= "test_block"));;;--->Which is the correct form? (command "_insert" "LABEL" pt1 "" "" "") );end if (if (nblock (= "test_block2"));;;;Which is the correct form? (command "_insert" "LABEL2" pt1 "" "" "" ) );end if repeat for all enames block
How i can select block to insert according to effective name?
Is there any way I can extract the rotation of a block relative to the yz axis and xy axis. I can extract the insertion point and xy rotation but not the yz and xz.
View 9 Replies View RelatedIs there a way to get a filename label in the title block??
At the moment filepath label is used, but this path is too long for the small space we have.
I have only found 2 posts on this subject, but both are more than 5 years old.
The label associated to a grading point when is moved when is moved changes its size automatically and a leader appears. After this happen no control over the grading point and its associate label. refer to the image below.
View 1 Replies View RelatedEverytime I try to attach a Hyperlink to a dwg via the ribbon Hyperlink button I receive a FATAL ERROR: Unhandled Access Violation Reading 0x0000 Exception at e1e7b028h.
View 1 Replies View RelatedI have architectural desktop 2011, my supervisor would like me to attach PDF and/or JPG to an attribute (or make an attribute that will call-up a JPG). I do not think this is possible, So…if it is correct that this cannot be done how can one place a word to a DWG and then ‘hyperlink’ it to a folder or an individual JPG? so I can click on the word int he DWG CAD and it will then pop up the JPG...
View 9 Replies View RelatedC3D 2013. We have profile line labels, some of which get manually edited (for example, change the "<[Tangent grade(FP|P2|RN|AP|GC|UN|SD|OF)]>" to a static number such as 0.29%).
However, if you CTRL+Click and select one of these labels and change the style of that one label, then the manual edits are lost and the label reverts back to the default string.
Is there any way to turn this behavior off?
Is there a way to "Edit Label Text" in a Parcel area label? Similar to the way you can edit it in other styles.
View 9 Replies View RelatedThree years ago I created a drawing in which I inserted Hyperlinks into the drawing. When I made a PDF from the drawing the Hyperlinks were still there and worked correctly from the PDF. Not sure which version of AutoCAD this was created from. I am now using 2012 and have tried to repeat the process but when I create the PDF the Hyperlinks are not there.
View 4 Replies View RelatedI cant get a Excel hyperlink in a drawing to open. Is there a way to find out where they are stored?
View 1 Replies View Related