I want to import a simply picture (flat "Paint drawn" star, for example) into AutoCAD 2014 then want to trace it there so it can be a AutoCAD 2014 format to be able to scale it very easy it and resize it without any degradation.
View 3 RepliesI want to import a simply picture (flat "Paint drawn" star, for example) into AutoCAD 2014 then want to trace it there so it can be a AutoCAD 2014 format to be able to scale it very easy it and resize it without any degration.
View 3 Replies View Relatedcan autocad 2014 import inventor ipt files?
View 3 Replies View RelatedI'm loving CS6 Illustrator, except for one thing. Image Trace. Here, Adobe seem to have taken away the two most usefull settings from Live Trace, and replaced all the presets with ones that are pretty much unusable. I almost always used either 'Comic Art' or 'Lettering' to trace hand-drawn images, but they're both gone. None of the new settings are good enough, even if I make a custom one. The main issue is that the sliders in Image Trace are for completely different things to those in Live Trace, so it's difficult to translate one set of settings into the other.
With Image Trace, I cannot get the same results as with Live Trace, and so far, have found myself having to have Illustrator CS5 open at the same time as CS6, just so I can get workable traces.
I don't know if it's possible, but is there any way to import the presets from Live Trace, or even the full tool, into CS6, to replace the new Image Trace presets?how to make the equivelant of Comic Art in Image Trace's new settings?This is a close up of a file I was trying to trace, showing the major difference in quality between the two CS versions.
Left: CS5 - Comic Art setting.
Right: CS6 - This is a custom setting, but is the closest I have come to Comic Art thus far.
As you can see, the definition of Image Trace is far lower in quality than Live Trace, giving me one large connected blob of colour rather than the distictly separate lines produced in Live Trace.
We use 2012 primarily, and I finally installed 2014 on 2 different machines. Both work ok until I load the 2012 profiles. Then, AutoCAD wont even start after you close and re-open. We use a lot of custom lisps and menus that i need loaded into 2014.
View 3 Replies View Relatedi want to open the data from Maya 2014 in Maya 2013.
I didn't find any options under save as; or export.
I am new to Lightroom 5. I imported some photos, but never named a Catalog. I would love to change the name of that catalog and am wondering how to do that? Also the date for the import is July 5, 2013 rather than January 15, 2014 the day I imported them. How do I change the date? I almost want to delete the photos and start over. Can I do that?
View 7 Replies View RelatedIs there a way to import image files and then trace them so you have a .dwg file? I am using autocad LT 2012.
View 2 Replies View RelatedI learned Autocad on release 12 and then migrated to r14 and 2001. Nowadays most drafting is done with r14. However I want to be able to insert a .jpg into the drawing
environment and draw lines over it. Specifically, I want to take pictures of Christopher Dressers designs and bring them into Autocad and then trace over them. I feel I will get a huge education into architectural ornament as well as becoming more facile with lines.
I haven't kept up with Autocad's upgrades but undoubtedly the later releases have this functionality. Which one will work?
I am an archaeologist working with survey equipment and Map3D for a few years but now I have the following problem.
When I import the shapefiles created in my leica/topcon equipment into Map3D (mapimport) there is the possibility to select which attributes are going to be imported with an import profile file (.ipf).
How do I create the above and save it so that I do not have to go through the same process again?
I have been migrating dozens and dozens of .pat files from one version of AutoCAD to the next for many, many versions. Most recently in AutoCAD 2013 the .pat files were stored in the C:Program FilesAutodeskAutoCAD 2013SupportPatterns - worked fine. During the migration to 2014 I received an install error report stating that this subdirectory did not exist and could not be created. Alternately it stated that the new default path C:UsersUsernameAppDataRoamiongAutodesk|AutoCAD 2014R19.1enuSupport will be used instead.
At first I created the Patterns subdirectory where it could not be done automatically. No luck. Then I placed the Patterns subdirectory in C:UsersUsernameAppDataRoamiongAutodesk|AutoCAD 2014R19.1enuSupportPatterns and no luck.
Happens every year. Upgrade and spend half a day or more trying to get everything back to the way I had it. All I have is a couple small toolbars for commands that are several clicks deep in the ribbons and I want them "right there" all the time.
I thought Autodesk 360 might be a good tool for this. All it did was DOWNLOAD some old settings and destroy one of the toolbars I'd created. They really need an override in there to specify upload, download, overwrite or don't.
I'm trying to migrate (I guess that's the technical term) my settings from 2013 Mechanical to 2014 Mechanical. It's probably too late already, after 360 did its deal, but I really want to get this down so we don't go through it every year anymore.
I maintain that PTC had this part of it down Pro/ENGINEER. You had a config file that was editable plain text.
Infrastructure DSP '14 / Product DSP '14 / Vault Professional 2014
Dell Precision T1650
Windows 7 Professional SP1 64-bit
Intel E3-1270 V2 3.5GHz / 32G RAM
Nvidia Quadro 2000, Driver 331.82
Space Navigator, Driver Version 6.17.7
I'm working on pdf image files, 300 dpi, and I want to use the Image Trace tool to vectorized these ones. The result has to be under 4 colors, and the file is a mozaic of photos calibrated 3mm x 3mm.
The purpose is to vectorize the whole image ( composed with approximately 800 photos )I did different tests with the settings of the Image Trace tool with samples of 12 x 12 mm ( 4 photos x 4 photos ) and the result is correct. But when I try to do the same with the entire image, the result is just horrible The entire image is sized 200 mm height and 130 mm width, but the import format is exactly the same than the samlpes I made my presets on.
I was thinking that Illustrator should act the same with the full image than with the small one, it just took more time to calculate the rendering, but apparently not.
I'm using C3D 2014. I created a pipe network, exported it to Hydraflow Storm Sewer, perfermed an analysis, and have HGL/flow data. When trying to import the .STM file, nothing happens. Here's what it does:
1) Import .STM into a Blank/New Drawing -> Creates a pipe network with correct IE, Size, and HGL/Flow Data
2) Import .STM into design drawing -> Choose to Update Network -> No change in network (IE, HGL, etc.)
3) Import .STM into design drawing -> Choose to Create a New Network -> Does not create a new network
I've tried closing C3D, and checking, still no change.
I am getting the following two errors when try to Mapimport either SDF or SHP files. Is there a setting I'm missing?
C3D 2014 SP1
W7x64; i7 8gb; Radeon HD 5700
We are being pushed from some of our customers to supply BIM files for Revit.I was told by our software supplier that Inventor 2014 could create Revit files, and it looks as though I can via the BIM Tab on the Ribbon. I havent used Revit or created any BIM content before and I was hoping to open another manufactures file (*.RFA) in Inventor to disect the file and how to create our own files. I can only find an import option in the OPEN dialog box for a Revit Project File (*.rvt). Is it possable to open/import a RFA files in Inventor 2014?
View 4 Replies View RelatedI open two different drawings, I'll call X and Y. I make X current. Using the setting tabs of the prospector I go to Y drawing and click the plus and open the styles i want to insert into X drawing. So for example I open <General <Label Styles <Note Elevation and drag that style into my X drawing. I go and look at my X drawing <General <Label Styles <Note and see that Elevation is not there.
I have tried using AeccImportStylesAndSettings and also I'm running the sincpac which has an import civil styles function that does not work either. I went to a co-workers machine and he can get the styles import function to work just fine.
why I may not be able to get this to work? I even tried to create a new layout from template and still could not get beyond the styles that are default to my current drawing. My only option is to create the styles manually and that is, well, not an option.
how to use Live Trace in Illustrator but now instead of the Tracing Options window having a button that says "Trace" it's now showing a button that says "Set to Default." I'm sure something isn't selected right or something similar, but I can't figure it out. why "Trace" is no longer an option?
View 2 Replies View RelatedImage trace shifts artwork once the trace is finished. Have to nudge art back into place each time.
View 6 Replies View RelatedI just started using CS6, jumping from CS3. A major tool I use is Live Trace, and I have custom settings for that. I cannot find a way to make Image Trace behave the way Live Trace did for black and white line drawings. The results I get in CS6 are far inferior to those I got in CS3 in terms of retaining the look of the original raster image. Otherwise, I will have to leave CS3 installed just to do my Live Trace.
Here is a sample of what I mean. You can see the quality degredation in CS6 compared to CS3. (And it's much more obvious when it's full size and full resolution.)
My settings used in Live Trace (CS3) were:
The settings I tried in CS6 that gave the above result were:
I have an Inventor assembly that I am trying to open in Showcase to produce a nice render of.
I get this error, how can I determine what is wrong or how to fix? My assembly doesnt show any errors?
Inventor Professional 2014-Update 2 - AutoCAD Electrical 2014
Win7-x64 | ASUS P8Z77-V | i7 3770 -3.4 GHz | 32GB RAM |
240GB SSD | nVidia GTX 670 4GB - 320.49
I have recently buy one software ( embroidery) , with the corel draw x5 essential.
- but I can not find the trace function to convert bitmap to vector , like power trace.
In my AutoCAD 2014, after selecting a grip on an object or a point it will snap to other grip points even when osnap is turned off. Is there a command or variable to turn what appears to be an auto grip snap function off?
View 8 Replies View RelatedI'm a student at lone star college in houston, and I'm working on a set of piping plans in autocad 2013. I just downloaded a student version of autocad 2014. I wanted to know if I can work on my plans in both the 2013 and 2014 versions without any hiccups or issues.
View 6 Replies View RelatedI am having problems opening an idw created in the 2013 version on my inventor professional 2014.
The idw contains its own template, views, dimensions, details and cuts.
Upon opening in 2014 to release details of the scale is changed randomly and the views are out of the leaf.
i made some 3d modelling in autocad 2014 in the 3d drawing mode but i have some difficulty in modifying the dimensions of the subobjects.
1 method that i already know is to use the scale gizmo which works but not much as i am not able to set the exact dimensions i need. it only scales the subobject according to the previous size.
modify and determine the exact dimensions of the sub-objects.
each attempt to save as or publish / plot to DWF in Autocad 2014 fails (Device not found) other than the device what am i missing?
tried from the Output tab on the ribbon as well as the application icon save as , publish, and plot all with the same result
I just installed AutoCAD 2014, but it's not pulling my custom .pgp file, even though the folder that file is in is first in my support path.
System specifications: AutoCAD 2014 64-bit SP1, Windows 7 64-bit SP1, Intel Core i7-2600K, AMD FirePro V4900
16GB RAM, Crucial M4 SSD, 3 Dell Monitors (2 30" 2560x1600 & 1 20" 1200x1600)
I've a problema with autocad 2014 when I start it all programs are freezing about a variable period fron 30s at 1min.
With autocad 2013 I don't has problems.
My instructor taught us to attach images with materials rendering tool to add jpegs to our 3d modelling. Every time I try to use it, it stretches my image to nothing but horizontal lines and despite trying to modify it with the texture editor it eventually colllapses the autocad. Here is my error number. CER_83372936
View 3 Replies View Relateddo you have a detailed procedure for updating autocad 2013 to 2014?
View 7 Replies View Related