i need to export Geometry Data (in properties) X,Y,Z coordinates/points from a Sold 3D object into Excel (csv.file) I have tried data extraction (EATTEXT) but it doesn’t pick the points up unless I add points manually.
View 5 Replies
I need to find a way to export my BOM data to an Excel spreadhseet. Some of my BOM's are in tables, most are not. I found a lisp routine that will export this data to a csv file, but it's clunky at best. I don't want to use the "ole" method, I don't feel like fighting that battle.
So outside of plotting to a "png", and pasting that into Excel, are there any other options that are feasible?
°°AutoCAD Rel 1 - 2014°°
I have several files that have lost their geometric data that is usually there when they are primitives. This also removes the grips that allow me to resize the objects on the fly. Is there any possible way "apply" new data to these objects without recreating them? Is there a command, an express tool or a lisp routine that can accomplish this?
View 2 Replies View Relatedi would like to use 3d dwg files from the 50 wood joint library for cnc processing. Therefore i load a dwg file (like attached) into account and want to start editing the wireframe, but thats not possible. Furthermore I expected to be capable of producing a solid for further processing in a CAM software.
How can I edit and make the attached geometry a solid?
I have a curved solid with a pattern subtracted from it in a model representing a sheet of mdf . is there a way to flatten the surface of the solid to get the geomerty of the cuts. I supose is same as matrial map.
View 1 Replies View RelatedI have been asked to write a module that will export layer data from AutoCAD and put it in an Excel spreadsheet. The user wants to have this done through a macro. I am assuming that I need to create a dll that is called from inside AutoCAD but I am not sure.
They want to start with AutoCAD 2008 and once we get it working there we will convert it to 2011 or 2012.
First of all, I can not find the 2008 API and second of all I'm not sure where to start. I am very experienced at programming. We are going to use VB.NET.
Can I export the text from autocad 2012 LT to excel file.
View 1 Replies View RelatedWhen I try to attach a 2013 Excel file into a 2014 drawing I get a message 'You have selected an unsupported DGN File. Only V7 and V8 files are supported.' Cannot attache through the Import command either. I know in past versions you could insert the file and any changes made to the file appeared to the attachment in the drawing.
Is this no longer possible? Surely not, it is way to handy. What am I overlooking to make this happen?
I was trying to export my alignment, at certain intervals, to excel (or text) as xyz data. I tried searching and found... Alignment to xyz
But it didn't really work. I can export the XY but not the Z in the report manager.
So my questions are.... How can I create a new report to incorporate the Z? Or is there another way to do it?
I should add I also tried the "Incremental Stationing Reporting" from the Profiles Report... However it doesn't recognize the profiles I've created? I get the "No FG profiles in....." even though there are?
I have a object data table attached to many polygon. In this table i have 2 line of data. I want to export in a tabloid like microsoft excel. I know autocad have a command to do this...
View 7 Replies View RelatedI have Export data from dwg to notepad lisp programe. But i need lisp programe for Export data (Easting,Northing and Level) from dwg to excel.
View 2 Replies View RelatedI have Export data from dwg to notepad lisp programe. But i need lisp programe for Export data (Easting,Northing and Level) from dwg to excel.
View 2 Replies View RelatedWhen trying to insert a table linked to an Excel 2010 file, it works up until row 28, however, as soon as I add a 29th row to the table it no longer inserts the table. When I try and insert it, I press ok and nothing happens. I tried inserting it as a smaller table and changing the data link to a bigger range after it was inserted, it just didn't update to a larger range.
Is there a way of getting this to work without having to insert it as two different tables?
I enter data into an Excel job setup worksheet. I then want to be able to extract data from given cells in the Excel worksheet, and have this become fields in AutoCAD. I do not want to use a table in AutoCAD - I want (ideally) to have the Excel data come in to AutoCAD as a field. I can see that Data Links tends to come in only to a table in AutoCAD.
View 1 Replies View RelatedI have made a data link to an excel file. Then I bring it in as a table. I then adjust the text height and remove all formatting from the table. Unfortunately, after closing and re-opening the file, the table changes. I lose formating/cell alignment/text height. It isn't even consistent across the table. The lost formatting is only on the 2nd split of the table, the first side retains the corrected formatting. I have selected the option to not update excel formatting. I don't even get a notification the table is updating. There haven't been any changes to the excel sheet either....
View 6 Replies View RelatedI want to link Microsoft Excel data with AutoCAD drawing (like dimension or values). When I made some changes in Excel data, value in AutoCAD drawing can be changes automatically.
View 1 Replies View RelatedI am using Civil3D 2010. I am trying to export the offset/elevation data from my cross sections to a text file or excel file so i can paste the info into another program. so far i've been labeling the offset/elevation info on the section and typing it into excel by hand.
View 9 Replies View RelatedI have been using a lisp routine to strip formatting from a linked excel sheet. (stripmtextV5) .When I try and run it on a sheet today it says some cells are locked. I've changed the cell format in the excel file to unlocked. I have unlocked the cells in the linked table. Yet it still says that some cells are locked...I have even picked in each cell to verify each one is unlocked.
View 5 Replies View Related verify if this is the intended forward/backward compatibility between C3D 2014 & 2013.
My project was previously using Data Shortcuts in C3D 2013. I opened the reference (not the source) drawing that uses a bunch of Alignments. During the initial drawing upgrade from 2013 into 2014 I get a message for each Alignment that, "{Alignment Name} was modified in a previous version of the software. Changes in the current were overwritten when the data reference was synchronized.". At this point everything seems fine.
The issue I'm having is that when I re-open that upgraded drawing using 2013 all of those same Alignments become promoted. They are no longer referenced!
each attempt to save as or publish / plot to DWF in Autocad 2014 fails (Device not found) other than the device what am i missing?
tried from the Output tab on the ribbon as well as the application icon save as , publish, and plot all with the same result
I cannot export my .dwg file in other formats!! i want to save in .sat format or .iges... when i do export it does not get saved nor give any indication that it has been exported..
View 9 Replies View RelatedNeed to export to excel, just text entities from old drawing. Or convert to table, then export. As long as i can get the text to excel.
View 3 Replies View Relatedi want to open the data from Maya 2014 in Maya 2013.
I didn't find any options under save as; or export.
I have a drawing with dimensions and number (number and text number). I want output (Can select each object) to a file excel. write a lisp do.
View 6 Replies View Relatedi have created a data band in profile view that should show a created profiles elevation, but some of the the data fields are missing irregulary. Also in the data band that shoud show the diferenece betven the tow profiles - EG and the new profile the data is missing. The EG profiles data and the surface are ok all is shown.
View 4 Replies View RelatedI have a Global Form in 2013 that I want to get into 2014. I cannot seem to export it from the iLogic browser, not can I edit it in the editor.
Inventor Professional 2014
Windows 7, x64
Dual-core i7, 8GB RAM
NVIDIA Quadro FX 880M
HP Elitebook 8540w
I have an drawing file which contains 3000points , as i want those to be converted in .csv format,
[URL]
I've been attempting to export geometry (which I believe is in the proper format) out of AutoCAD 2013 to the .iges (or .igs) solid body model format with no luck. I found the instructions in the AutoCAD documentation but when I try and execute, no luck. I do get the mandatory "1 object found that "fits the file type format requirements" dialogue so again I'm pretty sure that I'm doing things correctly.
Do I need a special plug-in? Here is the info on this type of export: Click Output tabSend panelExport.In the IGES Export Data dialog box, in the Files of type box, select IGES (*.igs, *.iges).In the File Name box, specify the name of the IGES file.Click Save.Select the objects to export and press ENTER to begin the export process.When export is finished, a notification bubble is displayed.
I don't even get the IGES Export Data dialog box to show up..
I have a character model in Mudbox 2014. I exported the face, body and hands as individual .obj files, each at its maximum subdivision level. But in Mudbox 2013 the sculpting layers are all flattened on the main layer.
Is there an option to keep the sculpting and painting layers intact?
I have AutoCAD 2013 and often "paste special" excel files that automatically update when the excel file changes.The problem I'm running into is I work with a person who has uses an older version of CAD 2004, so I always save to the older format for him.
When I etransmit, I be sure to add the excel file, but when he opens the dwg, only the outline of the excel appears in his dwg, no content.
Is there a way to easily "retrieve" solid model features and sketches from a stp file imported into Inventor Pro 2012 without having to recreate them?
View 2 Replies View Related
