I need to find a way to export my BOM data to an Excel spreadhseet. Some of my BOM's are in tables, most are not. I found a lisp routine that will export this data to a csv file, but it's clunky at best. I don't want to use the "ole" method, I don't feel like fighting that battle.
So outside of plotting to a "png", and pasting that into Excel, are there any other options that are feasible?
°°AutoCAD Rel 1 - 2014°°
I have a map in AutoCAD and I would like to fill certain sections of it. The colour that I require the fill to be changes according to varying data in an excel spreadsheet. Is there a way of linking the two?
View 2 Replies View Relatedi need to export Geometry Data (in properties) X,Y,Z coordinates/points from a Sold 3D object into Excel (csv.file) I have tried data extraction (EATTEXT) but it doesn’t pick the points up unless I add points manually.
View 5 Replies View RelatedI am trying to export some data from my BOM. I require the part names, quantities and lengths. I have followed a previous topic in these discussions which is now closed. it seems simple to follow but requires me to click on the export BOM icon in the top left of the browser. In my instance this is greyed out. D
View 4 Replies View RelatedIm struggeling with creating a code that opens a certain Excel spreadsheet and retrieves / inserts info.
the spreadsheet is a list containing part numbers for purchased components, therefore the list must be filled with information from iproperty. But it has to be where the next available number is. i had this working in iLogic, but have to move it to VBA for better use. the code that worked in iLogic is this one.:
[URL]
If possible it would be nice if the code at the same time retrieves the new partnumber and saves the active part as this part numeber...
Problem:
How to read real number data from selected columns in an Excel spreadsheet into an illustrator javascript array variable, so that then I can use this information to construct an illustrator polygon.
Further information:
I am new to javascript (and not much of a programmer in the best case, but do have some basic knowledge using ancient languages like FORTRAN 88). I am sure I am just missing an important step here despite all morning browsing with Google for answers (something to do with variable definition I assume?). I have some survey data defining the outline of features in map view listed in a string of point (x,y) values in adjacent columns in excel (these x,y point values calculated from GPS data using a commercial program to converted 3D position to a 2D x,y by geoid projection, and then in excel to re-scale point locations to illustrator’s artboard). What I am trying to do is select columns of x,y value pairs in an excel spreadsheet, copy these values to the clipboard, and then develop an IA JavaScript to draw a polygon through the specified set of x,y points. It seems easy enough to script illustrator to draw the polygon once I get the values from the clipboard are in a javascript array (lots a good tips here [URL] ....), but pulling in the clipboard data seems to be beyond me. I have tried populating a defined array with various combinations of array declarations and app.paste(); or windows.clipboardData.getData('text/plain'); with no satisfaction. I then had the idea to try to pull in the clipboard to one long continuous string, place that in a text box (see see its structure), andthen read and split up the text in a loop to populate the JavaScript array…but that deposited a complex illustrator table object into my text box, and several attempts to force the clipboard to paste text did not work (again probably having problems understanding variable type declaration).
I would be happy to find any method of scripting the pull of the selected on an excel spreadsheet for use in an Illustrator script…so if I am making this all harder than it needs, be I would be grateful to know that also!
I have been asked to write a module that will export layer data from AutoCAD and put it in an Excel spreadsheet. The user wants to have this done through a macro. I am assuming that I need to create a dll that is called from inside AutoCAD but I am not sure.
They want to start with AutoCAD 2008 and once we get it working there we will convert it to 2011 or 2012.
First of all, I can not find the 2008 API and second of all I'm not sure where to start. I am very experienced at programming. We are going to use VB.NET.
Can I export the text from autocad 2012 LT to excel file.
View 1 Replies View RelatedI was trying to export my alignment, at certain intervals, to excel (or text) as xyz data. I tried searching and found... Alignment to xyz
But it didn't really work. I can export the XY but not the Z in the report manager.
So my questions are.... How can I create a new report to incorporate the Z? Or is there another way to do it?
I should add I also tried the "Incremental Stationing Reporting" from the Profiles Report... However it doesn't recognize the profiles I've created? I get the "No FG profiles in....." even though there are?
I have a object data table attached to many polygon. In this table i have 2 line of data. I want to export in a tabloid like microsoft excel. I know autocad have a command to do this...
View 7 Replies View RelatedI have Export data from dwg to notepad lisp programe. But i need lisp programe for Export data (Easting,Northing and Level) from dwg to excel.
View 2 Replies View RelatedI have Export data from dwg to notepad lisp programe. But i need lisp programe for Export data (Easting,Northing and Level) from dwg to excel.
View 2 Replies View RelatedWhen trying to insert a table linked to an Excel 2010 file, it works up until row 28, however, as soon as I add a 29th row to the table it no longer inserts the table. When I try and insert it, I press ok and nothing happens. I tried inserting it as a smaller table and changing the data link to a bigger range after it was inserted, it just didn't update to a larger range.
Is there a way of getting this to work without having to insert it as two different tables?
I enter data into an Excel job setup worksheet. I then want to be able to extract data from given cells in the Excel worksheet, and have this become fields in AutoCAD. I do not want to use a table in AutoCAD - I want (ideally) to have the Excel data come in to AutoCAD as a field. I can see that Data Links tends to come in only to a table in AutoCAD.
View 1 Replies View RelatedI have made a data link to an excel file. Then I bring it in as a table. I then adjust the text height and remove all formatting from the table. Unfortunately, after closing and re-opening the file, the table changes. I lose formating/cell alignment/text height. It isn't even consistent across the table. The lost formatting is only on the 2nd split of the table, the first side retains the corrected formatting. I have selected the option to not update excel formatting. I don't even get a notification the table is updating. There haven't been any changes to the excel sheet either....
View 6 Replies View RelatedI want to link Microsoft Excel data with AutoCAD drawing (like dimension or values). When I made some changes in Excel data, value in AutoCAD drawing can be changes automatically.
View 1 Replies View RelatedI am using Civil3D 2010. I am trying to export the offset/elevation data from my cross sections to a text file or excel file so i can paste the info into another program. so far i've been labeling the offset/elevation info on the section and typing it into excel by hand.
View 9 Replies View RelatedI have been using a lisp routine to strip formatting from a linked excel sheet. (stripmtextV5) .When I try and run it on a sheet today it says some cells are locked. I've changed the cell format in the excel file to unlocked. I have unlocked the cells in the linked table. Yet it still says that some cells are locked...I have even picked in each cell to verify each one is unlocked.
View 5 Replies View RelatedTrying to figure out the best method to insert an IDW into an Excel spreadsheet without sacrificing quality. I have tried several methods to go straight from Inventor(2012) to Excel(2010) using print PDF at press quality, export JPEG, and even the snipping tool as a last ditch effort all of which inevitably loose all line quality when inserted to Excel.
I have only had success bringing a PDF from Inventor into Adobe InDesign where I am able to mimic the design of my Excel spreadsheet and create an additional PDF to include with the Excel document. It seems like there would be an easier way for Inventor and Excel to work together without sacrificing quality or adding additional steps.
I am trying to link an excel spreadsheet to my acad but I can't see it once i've linked to it?
View 2 Replies View RelatedGot a new computer, put AutoCAD LT 2010 on the machine, justlike the rest of the office, but also installed excel 2010, when the rest ofthe office has 2007. when insertinglinked spreadsheets from the new computer, and we update the links on our oldcomputers, Acad fatal errors out. Thisis because of the difference in the excel versions correct?
View 1 Replies View RelatedHow do i create a spreadsheet for title blocks. i want to be able to fill in a spreadsheet and automatically fill in the title block....
View 1 Replies View RelatedI'm trying to link a text from Autocad to an excel spreadsheet so that when changed in Excel, be changed in autocad.
After searching on some forums, I started doing database through ODBC.
I made a table in excel selecting and naming fields, added the file in windows OBDC manager, able to make the connection through dbConnect autocad, created label ...
Now I need to put the information in the database autocad text entity and already there I'm not getting more done
I have been trying to plot an excel spreadsheet within LT2009. See attached files.
Test Adobe.pdf was created using "Adobe PDF" driver, paper size A3. Looks good except for the exta lines running through columns 1 and 9.
Test Dwg to.pdf was created using "dwg to PDF.pc3" driver, paper size ISO A3 (420x297mm). The excel portion looks good but it has cut off the border all around.
Border size is 410mm x 287mm.
Using Acrobat 9 Pro and MS Office 2010.
If it's possible to import Excel spreadsheets into my drawing, instead of using the tables? (Using AutoCAD LT 2014)
I guess technically it would be easiest if I could import LibreOffice Calc spreadsheets, but I can get access to Excel easily enough if it's the only option.
Need to export to excel, just text entities from old drawing. Or convert to table, then export. As long as i can get the text to excel.
View 3 Replies View RelatedUsing AutoCAD 2010, and I'm having problems printing with one dwg, that I've had to copy an Excel Spreadsheet into. The spreadsheet was created with Excel 2007, and has quite a bit of text in it, and I'm trying to print it on an E size sheet, to an HP Designjet 4000. AutoCAD hangs up each time I try to print this, and my computer gets a message indicating that I'm low on disk space, even tho I do have plenty of space. It's like Autocad is taking more resources than it normally should. How I can insert this spreadsheet into AutoCAD and be able to print it? I've inserted the spreadsheet in model space, and the titleblock/border is in paperspace. I've tried printing to pdf and exporting to other formats to see if that will work, but AutoCAD keeps hanging up. Any other AutoCAD dwg works fine to print to the printer. It's just this one file with a spreadsheet inserted into it.
View 5 Replies View RelatedI am using Auto Cad LT 2012. How do I import an Excel spreadsheet into my drawing?
View 2 Replies View RelatedI am working on a gearbox design that requires multiple iterations on the shaft dimensins and other parts, so linking the dimiensinos to a spreadsheet would make this easier. However, I'm using the design accelerator for the shaft and other components and I cannot find any information on how to connect the dimensions I enter in that design accelerator to a speadsheet.
I know how to link to a spreadsheet for a regular component, but haven't used that much.
Is there a way of inserting points from an excel spreadsheet that come into the part file already fixed, instead of manually selecting the points and selecting the fix constraint?
View 2 Replies View RelatedHow do I insert an Excel spreadsheet into an AutoCAD 2011 dwg? Is it possible?
View 9 Replies View Related
