AutoCAD 2010 :: Inserting Pictures And Then Trace It
May 3, 2012Is there another way to get parts or the whole photograph into ACAD other than inserting the image and then trying to trace it?
View 4 Replies
ADVERTISEMENT
AutoCAD 2010 :: Inserting PDF Into Drawing To Trace Over The Objects
Oct 12, 2011I am using AutoCAD 2012. When I use Paste Special to insert and object as an Image Entity AutoCAD shuts down. I used it for years on older versions of AutoCAD with no problems. It is good to use when inserting a PDF into a drawing to trace over the objects for CAD use.
View 4 Replies View RelatedAutoCAD 2010 :: Which Release Can Import .jpg To Trace Over
Nov 1, 2013I learned Autocad on release 12 and then migrated to r14 and 2001. Nowadays most drafting is done with r14. However I want to be able to insert a .jpg into the drawing
environment and draw lines over it. Specifically, I want to take pictures of Christopher Dressers designs and bring them into Autocad and then trace over them. I feel I will get a huge education into architectural ornament as well as becoming more facile with lines.
I haven't kept up with Autocad's upgrades but undoubtedly the later releases have this functionality. Which one will work?
CorelDRAW Graphics Suite X5 :: Inserting Pictures Into Templates?
Apr 21, 2011[[URL]
]I got some templates from unisub that are in Corel Draw format. I don't know how to insert pictures into the templates
AutoCAD 2010 :: Inserting SID Files
Jan 23, 2012I have recieved several aerials that I need to insert into AutoCad. Is there a way to insert several files at the same time?
View 3 Replies View RelatedAutoCAD 2010 :: Inserting Images Into DWG
Apr 30, 2012How do I insert an image into an AutoCAD Mac 2011 dwg? On the 2010 PC version, it was just cut / paste method with the mouse .....
View 3 Replies View RelatedAutoCAD 2010 :: Inserting Xref With A File Name
Feb 26, 2013When inserting an xref, which I have prepared with a file name etc in a drawing, Autocad prompt me this message" The file you have chosen cannot be used as a block name or is greater than 8 characters. Autocad has assigned a shortened block name. Enter an Altenate name "
why so? This happen not with all file!
AutoCAD 2010 :: Inserting Block With Attributes
Apr 11, 2012I have a ton of blocks with attributes. Sometimes when I insert them, AutoCAD (2011) prompts me in the command line (perfect). Other times, a prompt box appears to insert attribute definitions (annoying).
What setting do I have wrong, or am I setting the blocks up incorrectly?
AutoCAD 2010 :: Inserting Graphic In Titleblock?
Dec 13, 2013how come when I insert an image (BMP) into my drawing border and then create a PDF, the graphic looks choppy?
I am using AutoCAD 2010. I am opening the BMP up in Paint, then copying and pasting into drawing titleblock.
AutoCAD 2010 :: Different Results When Inserting Objects Into DWG
Feb 1, 2013While in model space anything I insert, copy/paste or bring into model space looks squashed compared to the original data. It's like the Z axis is rotated. As it sits all the original data in model space looks fine or "flat" as it should.
When measuring the inserted squashed object it's giving me the correct dims but because it's squashed 18" looks like 12", if that makes any sense. Also if I copy/paste the original data in model space into another new template it then looks squashed.
Is there a system variable or setting just for that dwg that could have been changed?
AutoCAD 2010 :: Inserting Blocks With Macro
Nov 15, 2012I recorded a macro that inserts a block in top view. It works good but it takes allways the last inserted block, just like the insert command.
I would like to create a few buttons with macros tha insert a predefined block.
For example: I need a button that, when clicked, inserts 'drawing.dwg' in top view AND exploded.
AutoCAD 2010 :: Inserting Blocks Into Mtext Editor
Jul 10, 2012Is there a way to insert CAD blocks into the Multiline text editor, much like you are able to insert a block into a Table.
I am asking for the sole purpose of Plan Notes. When we lay out Plan Notes originally we place the note bubble next to the line of text it represents. When we have to come back at a later time and edit the mtext, sometimes add a line our users are in a rush and forget to re-align the note bubbles with the text. If there was a way to insert the block into the text editor and have it still be able to edit it.
Is this a feature in 2013?
AutoCAD MEP 2013
Window 7 pro 64 bit
E5440 (8 CPU) ~2.8ghZ
16GB RAM
NVIDIA QUADRO FX 3500 2270MB
AutoCAD 2010 :: Inserting Blocks From Tool Palettes
Dec 26, 2012I need to insert the same block from a tool palette multiple times into my drawing. Is there a way to do this without having to pick the block from the tool palette every time I want to insert it?
View 9 Replies View RelatedAutoCAD 2010 :: Uniform Scaling When Inserting Drawings
Aug 6, 2012I have two drawing files of arrows. One inserts uniformly and the other assumes that I want to specify the X and Y scaling separately. These drawing files do not contain blocks at the moment, but may have as some point in the past. I can't find anything in the drawing files that sets the block scaling when there isn't a block in the drawing, but one of them is behaving as if there is and the other one is not. How do I change all of my similar drawing files to insert scaled uniformly?
I see the option to scale uniformly on the insert dialog box, but I need this for a script, so I need to use the command line version.
Here is a copy of my command line for inserting the two drawing files:
Command:
-INSERT Enter block name or [?]: Sign-Arrow-12-A-Left
Units: Inches Conversion: 1.0000
Specify insertion point or [Basepoint/Scale/Rotate]: 0,0
Specify scale factor <1>:
Specify rotation angle <0>:
Command:
-INSERT Enter block name or [?] <Sign-Arrow-12-A-Left>: Sign-Arrow-16-A-Left
Units: Inches Conversion: 1.0000
Specify insertion point or [Basepoint/Scale/X/Y/Z/Rotate]: 0,6
Enter X scale factor, specify opposite corner, or [Corner/XYZ] <1>:
Enter Y scale factor <use X scale factor>:
Specify rotation angle <0>:
Command:
Note that the first time Sign-Arrow-12-A-Left comes in with no reference to option X/Y/Z, but the second time Sign-Arrow-16-A-Left has the option, and there for requires the extra line of input.
Illustrator :: Live Trace Tracing Options Shows Set Default Instead Of Trace?
Jan 5, 2013how to use Live Trace in Illustrator but now instead of the Tracing Options window having a button that says "Trace" it's now showing a button that says "Set to Default." I'm sure something isn't selected right or something similar, but I can't figure it out. why "Trace" is no longer an option?
View 2 Replies View RelatedIllustrator :: Image Trace Shifts Artwork Once The Trace Is Finished?
Aug 23, 2013Image trace shifts artwork once the trace is finished. Have to nudge art back into place each time.
View 6 Replies View RelatedIllustrator :: Can Import Settings From CS5 Live Trace To CS6 Image Trace
Oct 7, 2012I'm loving CS6 Illustrator, except for one thing. Image Trace. Here, Adobe seem to have taken away the two most usefull settings from Live Trace, and replaced all the presets with ones that are pretty much unusable. I almost always used either 'Comic Art' or 'Lettering' to trace hand-drawn images, but they're both gone. None of the new settings are good enough, even if I make a custom one. The main issue is that the sliders in Image Trace are for completely different things to those in Live Trace, so it's difficult to translate one set of settings into the other.
With Image Trace, I cannot get the same results as with Live Trace, and so far, have found myself having to have Illustrator CS5 open at the same time as CS6, just so I can get workable traces.
I don't know if it's possible, but is there any way to import the presets from Live Trace, or even the full tool, into CS6, to replace the new Image Trace presets?how to make the equivelant of Comic Art in Image Trace's new settings?This is a close up of a file I was trying to trace, showing the major difference in quality between the two CS versions.
Left: CS5 - Comic Art setting.
Right: CS6 - This is a custom setting, but is the closest I have come to Comic Art thus far.
As you can see, the definition of Image Trace is far lower in quality than Live Trace, giving me one large connected blob of colour rather than the distictly separate lines produced in Live Trace.
Illustrator :: Results In Image Trace Don't Match Live Trace
Aug 8, 2012I just started using CS6, jumping from CS3. A major tool I use is Live Trace, and I have custom settings for that. I cannot find a way to make Image Trace behave the way Live Trace did for black and white line drawings. The results I get in CS6 are far inferior to those I got in CS3 in terms of retaining the look of the original raster image. Otherwise, I will have to leave CS3 installed just to do my Live Trace.
Here is a sample of what I mean. You can see the quality degredation in CS6 compared to CS3. (And it's much more obvious when it's full size and full resolution.)
My settings used in Live Trace (CS3) were:
The settings I tried in CS6 that gave the above result were:
AutoCAD 2010 :: Inserting Template File Which Contains Attribute With Image In It?
Mar 7, 2013I created an attribute of a title block, our company logo is inserted as a raster image within the attribute, I created this dwg file into a dwt file (template) however every time I open a new drawing and insert in the template file in the paperspace tab the attribute comes in but always with the logo?
The frame of the logo shows up with the file path of where is is located.
AutoCAD 2010 :: Inserting Table Styles From Design Center
Mar 23, 2012I have a drawing with 3 table styles I've saved that I can usually insert into my drawings using design center when I need them. Normally all three come in fine, occasionally only two will come in. I have a drawing that I am trying to insert my table styles into and none of them are inserting! I don't know if there's a setting preventing this command or what.
View 1 Replies View RelatedAutoCAD 2010 :: Non Annotative Blocks Disappear When Inserting Old Drawing
Jan 21, 2012I have a drawing with some annotative blocks. ie Block name "BAR'.
If I insert another drawing (mostly old v2000 files) as a block which also contains blocks named "BAR" (which of course are non-annotative) the Blocks do not show up.
Is there any way to get arround this? Idealy I would like the old file inserted and have the annotion scale of the blocks in the inserted dbg set to the current scale.
CorelDRAW X5 :: Quick Trace Or Power Trace In Essential
Feb 25, 2012I have recently buy one software ( embroidery) , with the corel draw x5 essential.
- but I can not find the trace function to convert bitmap to vector , like power trace.
AutoCAD 2010 :: Change Default Font When Inserting A Symbol In Mtext
Jan 10, 2012If it is possible to change the default font used when inserting a symbol in mtext. e.g. the centerline symbol.
At the moment the font used is isocpeur and I would like it to be Romans.
AutoCAD LT :: Inserting DWG Into MS Word 2010 Results In Overlay Of Template Over Drawing
Oct 31, 2012I inserted a dwg created with Autocad LT 2004 into a MS Word 2010 document using: Insert | Object | Create from file. The result is the desired drawing is inserted but, in addition, the template used to create the dwg is also included and visible as if it is an additional layer. How to keep this from happening?
View 4 Replies View RelatedAutoCAD 2010 :: Pasting Or Inserting A Block Into Drawing - Subject Disappears
Apr 5, 2012Having problems when copy/cut and paste. When pasting or inserting a block into a drawing the subject disappears.
View 4 Replies View RelatedAutoCAD 2010 :: Dimstyle And Textstyle Created When Inserting Block From Tool Palette
Nov 5, 2013Whenever I insert a block into my drawing from the Tool Palette, Autocad creates a Text Style and Dimension Style,both named Annotative. This happens on any drawing, with any block.
I can purge them after the block has been inserted. They are NOT nested in the blocks. I have tried recreated the tool. Nothing seems to be working.
AutoCAD 2010 :: Inserting New Block And Entering Attribute Data By Selecting Another Block?
Aug 13, 2012Is it possible, via whatever methods (lisp?) to be able to have a premade block with an attribute and insert it into a drawing then assign a value to it by selecting another existing block in the drawing and using one of its own attribute’s values?
For example, say I have a block representing a telephone and it had an attribute called "PhoneNo" and I inserted it into a drawing showing an office floor plan that had blocks in each office space that are telephone junction boxes with attributes "PhoneExtension". I would like to be able to autocomplete the entering of the “PhoneNo” data by selecting one of the telephone junction boxes in the drawing and using its attribute’s value.
AutoCAD 2010 :: Insert Title Block And Annotations With Pictures In Design Using Paperspace Option
Mar 19, 2012I have just finished my design and I wanted to insert a title block and annotations with pictures using the paperspace option. I want to print the design out onto A1 Paper (80000mm x 56000mm) to a 1:100 scale.
What I want to know is what is the dashed line, how do I make the paperspace A1 size and a 1:100 scale, as well as wanting to know how to make the title block and add annotations to the design.
One problem I am facing is that any line I do create comes out bold as well as when I zoom into the drawing itself every line is bold. Why is this?
Paint Shop Pro :: 2010 Can't Sort Pictures?
Feb 23, 2012I'm using a trial version of Paint Shop Photo 2010, trying to make a simple slide show with music. I downloaded into my laptop from my desktop, 137 pictures already organized and sorted by me and numbered sequentially (using my old faithful, but antiquated PAINT SHOP PHOTO ALBUM ). However!! When I bring this into PSP2010, all the nicely numbered pictures are scrambled! And I can find no way to do a simple file sort by "Name" (i.e. number). I can sort my File Folders by name!! But that does me no good. PSP2010 leaves me with no choice but to hunt each photo from memory (no file nos. are showing now) and drag it into the tray.
View 3 Replies View RelatedAutoCAD LT :: Import Images To Trace Them?
Mar 12, 2012Is there a way to import image files and then trace them so you have a .dwg file? I am using autocad LT 2012.
View 2 Replies View RelatedAutoCAD Inventor :: Ray Trace Instead Of Render?
Jul 8, 2011is it possible to ray-trace and output to file instead of render in Inventor Studio? I ask because realistic visualisation with ray tracing active gives me better results than render. It might be I am using the wrong settings, but I don't know.
View 8 Replies View Related
