I have 320 CCTV cameras on a building, and now the owner wants to see the Field Of View of every camera. Any easy way to place the FOV on each camera? There is any program that I load the drawing and once I place the camera, it gives me a FOV. I know "VideoCad 7" does it, but it cost $350.
View 1 RepliesI am having an issue when I use the "Place in Photoshop" command from within Bridge CC, it is skipping the Camera Raw Dialog box and not behaving like a normal smart object. This has been my workflow for years and suddenly it's not working in CC.
View 1 Replies View RelatedIs there a way to duplicate in place? I have a instance where I am using a lot of subtractions and I want to have multiple copies of objects in the exact same position. I am finding that when I do copy I often snap to the object but the direction for depth relative to the view I am in ends up being different. Example being I have a 2" Diameter circle extrude that I want to be 120" long. I created that. I want a copy of it in the same position. I am looking from the front so all I see is the circle. I select copy and grab the center point and snap to the centerpoint. Now I have its zero at the other's 120" mark. I am hoping I could just run a duplicate command, but I cannot seem to find that.
View 3 Replies View RelatedWhen saving an AutoCAD drawing there is a Thumbnail image saved (if you have the option turn on), but when the command "Edit Xref In-Place" is used there is no Thumbnail image saved. So now when I try to preview any drawing that has been edited through this command there is no longer a thumbnail.
I am using AutoCAD 2012 and the option to save a thumbnail is turned ON.
This happens on more than one document. A ueser showed me when she references in place, you just see the cursor spinning in a circle. Internet is NOT open, just Outlook.
View 4 Replies View RelatedI am trying edit an Xref in place in a sheet file both through the paper space view port or within the sheet file's model space but receive a pop-up warning that states "Selected Xref Block is NOT editable". Other sheet files are set up the same way and allow edit Xref in-place.
View 1 Replies View RelatedI worked with about 70 blocks that I routinely insert in drawings, at present I have an area where I keep all them in every drawing. I would like to have a bar that will contain the blocks where I can drag and drop them into place.
View 5 Replies View RelatedI don't know what I did, I tried to check the history of my operations but I didn't find the problem. The /, ', " change place on my keyboard and I can't find them. Then it can't recognize the measure that I give!!!! It is only in autocad because I can write it in other programs.
View 1 Replies View RelatedWe have about 300+ dwg's on which somebody edited the 'xref in place'.
This has caused the particular dwg files to expand from 300k to 4mb.
Purging seems to have no effect. Is there any way of reducing the file size on these back to normality?
Untill recently I have been able to edit my blocks or xref files in place. Now when I try do that CAD tells me to select nested item. Is this a setting a changed by mistake? If so what is it?
View 2 Replies View RelatedWe are using autocad 2012.
Is there a way to automatically place dimensions on a specific layer, for example layer DIM.
I am trying to render a specific camera view for a specific mm lens. My issue starts when I select the camera and the pop up viewing window shows a particaluar camera view, I anticipate this as being the correct viewing lens as set in the camera properties. I then right-click on my camera and set the current view to the camera. This shows the outline of the camera FOV and beyond, which ends up being the final render plot. I know I can use 3dsmax for a more accurate depiction of what I want, but I like to proof my images before sending them over to 3dsmax. Which is the correct FOV as stated in the camera properties? Also, is this the same view as my render?
View 1 Replies View RelatedI have attach one drawing if you open and copy this from one place to place then dimension is automatically increases. can i know how this increase or what type of this dimension it is.
View 7 Replies View RelatedWe use AutoCad to name our dxf files for our Burn Table and whenever we get a new part it is a repetitive task to input layers and common text. So what I am curious is can AutoCAD input the layers and text automatically using a Macro?
I want the Macro to put in 6 layers and choose the layer color and title then input text boxes with word in 3 different layers. There will be about a total of 10 different text boxes with text already put in the boxes by the Macro.
I want to place text along an arc as shown in example dwg, how do this using array or other method?
View 5 Replies View RelatedI want automate selecting an object from a place on the window to another place on the artboard in Illustrator.
View 1 Replies View RelatedI am using Photoshop cs6. I purchased a template for magazine advertising purposes. The images have been taken out but there are custom designed objects (masked shapes) where I am supposed to place my images. When I attempt to place a photo into one of the shapes, using the Place Command, it does not work.
How can I place an image into one of the objects?
I did notice that zoom in or out in camera raw is slow , even in middle pc , i'm not talking about hi end pc but i did find it's amazing fast if use process 2003 or 2010. May i use like default the 2003 or 2010 ? How can i do it?
View 5 Replies View RelatedI am using Photoshop CS6. I have a question about Photoshop command Place.(File- Place) . Here are some pictures below. It shows the problem.
I opened the PSD file that has a green circle(picture 1) and using Place command to import other PSD file that has a red circle(picture2). Those 2 PSD files are same size, same canvas size, 1024x1024. So it should place the red circle precisely on the green circle, but as you can see, if I import the red circle PSD into Green circle PSD, Place command won't place the red circle pensively on the green circle. There is a gap between those 2 circles.(Picture3) It's really frustrating, because I have to move the red circle layer manually to place it just onto the green circle.
This command "Place" isn't reliable, so usually I don't use this command, and use Duplicate layer or group to import contents of other PSD, but if Place command can import other PSD file without this gap problem, I will use it because it's much faster than duplicating.
Do you know why and how to place those 2 files without the gap? Is it a glitch? I should not use Place command to import other PSD file?
I cut and paste in place from a layer to an other and its not in the right place. it seems new since CS6
I have multiple artworks on my file but i could do it since then. do you now how to not talke care of it ?
For some reason when using the path option in inventor studio for camera animation the camera rolls for no reason?? I have created two helical curve sketches around my product, the outer curve is the path for the camera and the inner curve is the path for the target. Both curves are the same height and have 1 revolution. When i play the camera it works out fine untill it hits 1/4 of the way through and suddenly flips 180 degrees so now the camera is upside down, once it hits 3/4 of the way it flips back again to the correct rotation. If i dont create an inner curve for the target and place the target directly in the centre of my product with no path to follow the camera spins all over the place when it follows the curve.
View 9 Replies View RelatedCan't open file from Nikon D7100 in Camera RAW Plug-In,i have Photoshop CS5 and plugin is upgraded.Format NEF from Nikon D 7100 is not in this plug-in photoshop.
View 2 Replies View RelatedI am using Photoshop Elements 11, using WIndows 7 Operating System. I have a new camera Canon Rebel T5i, and having problem viewing images in raw format (cr2).Message in PE11, states, "Camera model not supported by installed version of Camera raw."
Canon software views images. Suspect my minimum camera raw plug in version does not support this new camera..I am unable to locate in the software any menu item that allows me to view the camera raw plug in version.
I don't know how to phrase it correctly but the 3d camera tracker inside of After Effects will only apply key frames to the null object. This causes the footage to rotate around itself.
View 4 Replies View RelatedHave no choices in the camera calibration tab inside camera raw plugin. Use CS3 and Raw 4.6. Are choices only available in later version or PS? Also in Raw preferences choice for camera serial number and also setting as defaults. Where to enter serial number etc.
View 1 Replies View RelatedI'm an amateur moving up to LR 3 and have been trying to learn this program by reading the LR3 book by Scott Kelby. He shows that the Camera Calibration feature has some settings for specific cameras yet the drop down menu has none listed. I've upgraded to 3.6 and the images were copied from raw to DNG.
View 6 Replies View RelatedI am relatively new to Lightroom. I have imported Panasonic Lumix DMC-FZ200 raw (.RW2) files into Lightroom 5.3. When I go into the Develop module under the Camera Calibration the only profile that shows up is Adobe Standard. My camera is supported according to the Adobe web site.
View 2 Replies View RelatedI am working on a project where I am incorporating 3d text into a shot with an onscreen talent speaking to the camera. I am trying to get the text to only move when the camera moves such as a pan or a hand held shake, making it look like it's part of the environment. It will track with the camera and looks great until my talent /subject moves, then the text moves with the subject. What am I doing wrong in my tracking? I have looked up tutorials and articles searching for others who have had this problem and cannot find anything that replicates my issue. Every tutorial I've seen does the same thing with fantastic results but I can never get the text to not move with my subject.
View 2 Replies View Relatedmy PSE11 was working fine until i bought a new camera and tried to upload photos from my RAW files. It gave me this message
"Could not complete your request because the file appears to be from a camera model which is not supported by the installed version of Camera Raw.Please visit the Camera Raw documentation for additional information."
so i tried to install the update.... installed it fine, kept getting the same message when i would try to open the photo. after researching online i found the suggestion of uninstalling and reinstalling photoshop elements. i did that once, tried the update again...same results. uninstalled again. tried the update again and still getting the same message. ive checked the adobe website and everywhere i look says the version of the camera raw DOES support my camera (nikon D7100).
After an, automatic, update to camera raw 7.3 in Photoshop Elements 11 all Camera Profiles are gone. All that is left is "Matrix". I use Elements 11, windows Vista on a 64-bit machine, my camera is a Nikon D7000.
View 2 Replies View RelatedI own a GoPro Hero 3 Black camera. I saw the Russell Brown demonstration of Camera RAW to correct lens distortion (
[URL].......
In this instruction, he takes images into Camera RAW and selects a tab called Profile, and it automatically detected the camera from metadata and made corrections.
I was sold, subscribed to Adobe Cloud, downloaded Photoshop and started following his tutorial. When I got to the lens correction part, my Camera RAW has no Profiles tab. Brown does say that you need the latest version, but I have assumed that since I just subscribed and downloaded, that I have that.