How to move vertex of shapes, but i can't find back how. I'm trying to follow the solution / adobe info , but still can't select single or multiple vertex of a shape, its always everything selected. I'm actually using a shape that i had modified this way before already.
View 8 RepliesI would like to move two different vertex, from different mesh, at the same place. I thought maybe I could put a guide or a landmark to the position I want the vertexes to be. I can't find anything about guides in 3ds max
View 2 Replies View RelatedI have read that this feature was removed(??) in 2011. How to do it in 2012?
Use Axis Constraints is ON in the Grid and Snap Settings but when i hoover over the vertex the snap goes away and a small circle shows up. When i click the vertex and drag it the axis constraints are turned off. I use the vertex snap all the time.
I have drawn this part and can't find a way to... not even sure how to describe it.I need to replace the yellow edge by the green one.
View 2 Replies View Related[CS6] I created shapes with the pen tool.
Then I selected the path selection tool and selected a path.
Clicked right mouse key, choosed "Fill Path..." or "Fill Subpath" (don't know what it means). After filling with a color I get an object in
the form of the path and I can move the path to another place.
But I can't move the object in the shape of the path. I can't move it with "Path selection tool" because it's no path. Then I tried the "Move Tool" but I also can't select the object with it instead the whole canvas is moving.
How can I select and move shapes which were created with the pen tool?
Layer effects are enabled for the affected layers and the layers show the stroke effect active on the shapes, in a colour and size that would be very visible.
Is there some other overall setting I may have accidentally triggered?
Let's start with a blank canvas. I draw a straight line down one side of my image using the pen tool (not freeform). It creates the line. I Ctrl/Click away from it to complete the path.
Now I want to add some layer effects to this pen line and nothing happens ................ Can anyone shed any light on why this might be happening?
I am trying to make extrusions to an image. I am new to Illustrator and have read that .ai files are the only ones that you can extrude in AE. However when I bring in an .ai file and select create shape from vector layer, a grey square covers the shape. I am assuming that it is a transparancy issue and it is just filling in the size of the .ai project. I could be wrong though.
View 4 Replies View RelatedI downloaded a composition from Videoblocks.com and hit RAM preview to let it play smooth. Then whetever I move the CTI after that, it de-renders.This has never happend in other compositions I've worked in.
View 3 Replies View RelatedI have separated Illustrator images for a character, I applied the puppet pins to one of the layers and tried to rotate it. The puppet pins stay stationary, they don't move with the layer. THis is frustrating, because all the instructional videos I've seen says to "just rotate and move the mesh" but that doesn't work. Even when moving the pins, the image gets cut off and warped what is only inside the mesh.
View 2 Replies View RelatedIs there a way to create a vertex inbetween 2 vertex evenly? Just like the divide command in a spline?
View 2 Replies View RelatedThe current time indicator won't move to end of comp in AE CS6. I setup a new comp at 10 seconds. When I drag the current time indicator OR hit the End key to bring the current time indicator to the end of the comp it stops at a value of 9:23. Is this a bug?
View 3 Replies View RelatedI have an old man whose eyes are slitty and so I have created a white with a layer and feathered it round his wrinkles and it looks ok. I can add mask track to this in ae and also track it in mocha. I have an iris import clip that I then need to add to the white. It is in .png.
I cannot make a mask path appear on the layer information to the left of the screen so the iris dances about and can't be tracked.
How do I blend the white mask layer and the iris layer so they move as one? Do I put them together then track them togethr in mocha?
I have spent a day on this trying to figure it. On top of that I would also like to clone an eyelid half open so that I can put this on top of white layer, iris layer and then eyelid and track all together. But if possible the white and iris moving together would be enough.
In the instructions on youtube I have also found that when I hit 3d little cube icon I get a black background on the iris and not the old mans face how do I get rid of that?
This is for a man who gets wolf eyes in the film. Would it be easier to get some wolf eyes in photoshop and stick those on? the clip is just 4 secs long.
Can I attach on PNG image that I move to different directions by keyframes some elements with tracker?For some reason he does not let me choose the layer of the image I want to be thw "motion source".
View 5 Replies View RelatedI have several placeholders where I have added keyframes for instance opacity fade up and down at the beginning and ending of the layer. If I replace it and the video is longer/shorter than the placeholder then the keyframes will not adjust. Is there some way to have keyframes move dynamically based on the video length? I looked into expressions to calculate the start and end time of the layer then fade in and fade out using the time but it was quite time consuming and inefficient, it would also be hard to write new code for say position versus have dynamic keyframes.
View 2 Replies View RelatedI would like to use a vector object made in AI as a custom shape to be used as a cookie cutter in elements.. I imported the AI file in photoshop but the "define custom shape" entry under "edit" was grayed out.
View 2 Replies View RelatedUsing Lasso i have created a good shape that i require in my work. so now i want to save that shape i have drawn to custom shapes so that i can use it later also in my future works.
View 4 Replies View RelatedI'm want to drag an objects anchor and have the position co-ordinates offset by opposite amounts so it doesn't appear to move postioin on screen. IS there a tool for that?
View 3 Replies View RelatedI am working on a project where I am incorporating 3d text into a shot with an onscreen talent speaking to the camera. I am trying to get the text to only move when the camera moves such as a pan or a hand held shake, making it look like it's part of the environment. It will track with the camera and looks great until my talent /subject moves, then the text moves with the subject. What am I doing wrong in my tracking? I have looked up tutorials and articles searching for others who have had this problem and cannot find anything that replicates my issue. Every tutorial I've seen does the same thing with fantastic results but I can never get the text to not move with my subject.
View 2 Replies View RelatedI drew something up on a sheet of paper, scanned it, then traced it's bitmap as line art. I then proceded to edit the vectors to recover all the detail I lost with the tracing. It took forever!
Now that I´m done, I realised there is a problem... how can I color in the drawing, if the lines themselves make up the shape? Essentially, I´m left with blank spaces in between all the lines instead of solid individual shapes that can be colored in.
What can I do? I´m so desperate I´m thinking of creating a gazillion individual shapes with the colors, and slapping them underneath the lines to "improv" a fill. But that will take waay too long, so is there an easier way?
If I could "invert" the shape I have now, so that the blank spaces become individual shapes, and the lines become blank spaces.
is there any way to add shapes, in the "basic shapes" bar?
or maybe in any other locations.
I use a lot of predefines shapes, that are saved in various files. i wanna make a way to directly import these shapes, whithout open files and copy/paste the dsired shapes.
I try to select and move a layer using the Move Tool, another layer is immediately selected and moved instead.
Also, if I have layers inside a folder and try to move one of those layers, the entire folder is selected and all layers within that folder move.
I have not grouped any layers together.
I'm using Mac OS 10.4.8 with PS 9.0.1
I started with a plane and then was connecting vertices to expand the plane. All the new vertices show more than one normal comming off it. I have checked and their is only 1 vertex at each of the points that are sprouting like 3 normal lines per vertex now.Unify normals removed them but still wondering.
View 3 Replies View RelatedIs it possible to link locators to vertex on a spline to be able to control certain vertex points?
View 2 Replies View RelatedI have a vertex that is a connection point to several edges. Now, how do I split the vertex into several so every edge has one? Is there such a function? Or do I need to instert them manually?
View 1 Replies View RelatedI've got an animated model in 3Ds MAX which is done by applying Taper modifier. I'm trying to export this to FBX format including animation and then import it to another application called fragMOTION which only supports Skeleton animation and Vertex animation.
But the problem is fragMOTION does not show any animation frames while if I turn off the modifier and do a simple translation or rotation animation it is imported as it's supposed to be.
I also tried to Bake animation or Point Cache but no success. I can bake the animation into keyframes by using Cloth modifier so the result would be an animated Editable Mesh (keyframes) without any modifier in stack.
Should I take any additional step to convert the animation into Skeleton or Vertex animation?
Windows 7 Ultimate x64
3Ds Studio Max 2012 x64 - Student Version
3ds max 2012. I know most of the base of the software.But I never understood the technique of adding Polignim, vertexs and lines to the object to make it more realistic
Here I am trying to create a vertex: URL....
This is what happens after I create the vertex: URL....
The problem is that the vertex is not part of the line.You can see it because I moved the vetex. Some of the line was supposed to move with the vertex. This means that vetex is not part of anything. How to create vertex on the line.
problem I am encountering with adding vertices to the ends of polylines in AutoCAD LT 2012:
I typically use the drop down menu that shows up when hovering over the end (or mid) point of a polyline to choose "Add Vertex" to a polyline. If I do this to one end-grip of the polyline, it will add it onto the end of the polyline as an extension (desired and intended effect). If I do it to the other end-grip, it will add the vertex behind the end of the polyline as if I had used the mid-grip to do it (not the desired effect). If I wanted a vertex in the middle of two end points, I would do this procedure using the mid-grip, not the end-grip. One would think that by using an end-grip, it would come off the end, not go into the middle....one would think.
The Question: Is there a short key or quick command to use to guarantee the added vertex will extend from the end of the polyline rather than add one in the middle of the polyline, no matter which end I am trying to extend?
I have imported a dwg witch was created by Revit. The problem is that it creates polyline vertex for curves. But i want a arc, or at least not so many segments.
on the image; on the left is what i got, on the right is what i want.
Delete some vertex in this polyline.
hhh1.png
Example as: i have 3 vertex (0,1,2) and you can see vertex 1 stay between vertex 0 and 2. Now, i want to delete this vertex how can do that. Similarly, i want to delete some vertex 3,5,8.
I currently click on a shape to see the grips. Then I put the cursor on a grip and see a window open that gives me the options of Stretching a vertex, Adding a vertex, or Removing a vertex. Is there a way when adding a vertex that you can add Mulitple vertexs without having to click on add vertex every time.
View 3 Replies View Related