3ds Max :: Nurbs Toolbox Not Displaying
Jun 21, 2011
I have a dual monitor with max 2011 and after i have created a nurbs curve i go to modify, select the curve then try to active the nurbs toolbox, doesnt matter how many times i click it hasnt appeared. i have reduced the screens to one to see if it had gone off somewhere but it still wasnt displaying. I have a quadro fx 580 and have updated to the latest drivers, I have also updated max.
if it has disappeared of the screen into the area outside my screen (done that before) is there a way of bringing it back to the screen area, top left.
View 1 Replies
ADVERTISEMENT
Aug 14, 2012
Is it me or is there no good information on how to use nurbs modeling in 3dsmax? Am trying to fing a video that explains the tools and how they work but i cant seem to find anything, and maybe because i aint looking in the right place?
View 3 Replies
View Related
Nov 28, 2011
I need to extract a curve off a nurbs object. I do it all the time in maya, but can't figure it out in max....
View 1 Replies
View Related
Jun 9, 2011
I have created a NURBS rope with Surfaces>Extrude. I choose NURBS so that I could get nice UVs on the rope automatically, but they are actually all stretched out (see attached shot). Is there a setting in the Extrude process that could get more uniform UVs?
View 4 Replies
View Related
May 9, 2013
how to create a NURBS circle in AutoCAD?
View 2 Replies
View Related
Nov 6, 2013
I want to ask, Can I get CV Coordinates for Nurbs Surfaces ? How can I get ?
View 1 Replies
View Related
Mar 31, 2012
i have an issue that i want to separate my yellow solid with nurbs surface (light green). the yellow solid is my walkway which has to follow the terrain (nurbs). easier way to split these two?
View 1 Replies
View Related
Nov 5, 2012
I have converted a NURBS object into Polygon Object, however it has still kept the riginal" NURBS object. How do I take the visibility off the NURBS object?
View 1 Replies
View Related
Jul 10, 2012
I found to model a joystick. I have created a spline mesh, and applied a Surface modifier. The next step is to convert it to an Editable Poly. Fine, no sweat there. The thing is, when i do that, Max creates a ton more vertices; so many that its blatant over kill. My Surface mesh contains only 214 verts, but after conversion, i have over 6000.
Im guessing its adding some kind of smoothing somewhere...? After conversion, the tutorial has no more verts than it did before conversion, and it looks pretty much the same.
Conversion does not add extra vertices?
Intel I7 3.8Ghz, 8GB DDR3, SSD, nVidia 460, Windows 7 Ultimate x64
3DS Max 2011 Hotfix 4 x64
View 1 Replies
View Related
Feb 1, 2014
i was creating a simple character(blobs withen blobs). It was going pretty good until i camme across an issue that i can't seem to fix. I first had his neck as a nurb but i realized to do what i wanted i would need to deleted a couple faces so simple create a polygon the same size and shape. So i draged the nurb over clicked create polygon and i made it. The issues was that i can not seem to get them the same size i went to the channel box and typed in the same numbers for size. It was similiar but, was off the entire object was too big. I tried extruding it to match the same rough height and i got that nurb was on a scale that was about 1.626 times larger this. I forgot to mention that i am running maya 2014 student edition.
View 2 Replies
View Related
Apr 14, 2011
When I draw a Nurbs Curve and check Enable in Viewport it is not visible in the viewport. I can change thickness settings, etcetera and see the bounding boxe changing in size but see no visible curve in any of the viewports. Is this a bug in Max 2012? Running Windows 7, 64 bit, Quadro 4000 with latest drivers.
View 9 Replies
View Related
Sep 24, 2013
How to fill an isoparm or cap a NURBS Surface? I have a simple NURBS surface, All I am trying to do is reate anotehr surface using the end isopalm.
View 2 Replies
View Related
Oct 6, 2012
1. I've never worked with nurbs before. I have made a nurbs plane, made it live, and drew some curves on it. Now, whenever I select the nurbs plane the curves are also selected. How do I delete only the nurbs plane without deleting the curves?
2. I am trying to make eyelashes using paintfx. How do I get the paintfx hair (the eyelashes brush) to orient themselves "onto" a surface, like in the attached image?
View 2 Replies
View Related
Feb 25, 2014
Was wondering if there is a way or a plugin for 3dsmax to use splines or nurb curves to create "Jura"-like line patters- the exact thick and thin line formation you would see on a dollar bill. To create curves, and contours, around text and shapes.
Win7 Pro 64bit
I7 3680 6 core 12MB cache w Corsair H80 liquid cooling
ASUS P9X79
32 GB DDR3
NVidia Quadro 5000
3TB WD
View 2 Replies
View Related
Nov 14, 2011
I've been modelling in Maya for less than a day so go easy on me!
I'm in the process of making a traffic light and have got a bit stuck on the shade around the light.
I first made a profile curve and revolved it to get a kind of cup shape. The profile curve double backs on itself so the revolve is not completely flat.
Next I projected a curve onto the side of the revolve to get the wavy shape of the light shade, and trimmed the excess off.
Now I have my lovely traffic light shape, but the ends where the revolve was trimmed are not attached. (Because I double backed the profile curve)
Is there any way I can close up this gap?
(I've attached some screenshots).
View 4 Replies
View Related
Sep 6, 2013
Any way of viewing the coordinates of the Control Vertices (Control Points) of 3d or 2d NURBS Surfaces. I tried to use the "properties" of the 3d NURBS surface that i designed but i could not find them anywhere..
i would also like to ask if it is even possible to export these coordinates to txt or even more to Excel.
View 1 Replies
View Related
Nov 21, 2010
I'm rigging a model of a robot and I have wires (nurbs circles extruded along a curve) attaching to two objects that are on different joints. I have it rigged so that when the first joint moves, half of the CVs of all the wires (in a control cluster) move along with the joint (and, in turn, the object they are attached to). This much works fine, the extruded nurb follows the curve and stays the same diameter from start to finish. My problem starts with the rigging of the second joint (the second joint is the parent of the first joint). I've tried many different ways of rigging it, but as I'm only just starting rigging my thought process isn't quite a straight line yet. Basically my problem is when the source curves physically move, the extruded surface goes twice the distance as displayed in the picture below.
I need to know how to get the extruded surface to always be in the same place as the curve with out breaking the connection.
View 8 Replies
View Related
Jun 11, 2012
Any way to evenly distribute Locators on a motion path along a nurbs circle? Its for a mouth/lips rig. and I need it to be symmetrical with out manually inputting values.
View 2 Replies
View Related
Mar 23, 2003
I moved my toolbox to the bottom of the screen and before I knew it, it was GONE! How do I get it back again??? Im running Photoshop 7.0 if that makes any difference. I really don't wanna reinstall Photoshop but do I have to do that?
View 2 Replies
View Related
Dec 1, 2011
I've been a Gimp user for a while, and I recently upgraded my not-so-reliable Windows PC to a Mac Mini running OSX Lion.
However, after installing the Snow Leopard version of Gimp (which works fine otherwise), I have found that unlike the Windows and Linux versions of Gimp, the toolbox does not stay on top of the other Gimp windows.
View 3 Replies
View Related
Mar 29, 2012
(Windows XP)The toolbox and the layers-brush box are always appearing on my system when GIMP is running.
I can minimize all my GIMP windows, but those boxes stay up.
I can "show desktop" and they will disappear but then the moment any other window is up, they appear once again.
This gets very annoying when I leave GIMP open while working on other things.
Is there any way I can set them to minimize when all the other GIMP windows are minimized?
View 7 Replies
View Related
Apr 29, 2013
I can bring up a photo from my desktop, open it in Photoshop, but then the toolbox doesn't appear My toolbox would Always come up automatically
View 4 Replies
View Related
Sep 12, 2013
I'm working on a Mac with Photoshop CC and have the option Application frame disabled.
When I open a picture, the picture is at the top left behind the toolbox:
Then I have to move the window with the picture.
What do I have to do in Photoshop, that by opening a picture, it is beside the toolbox automatically?
View 2 Replies
View Related
Sep 23, 2006
I am hopeful that somebody who is familiar with Photoshop can help me in my desparation. I've lost the Toolbox in Photoshop 5.0 and can't find it anywhere. Clicking Show/Hide Tools under the "Window" pull-down menu reveals nothing.
Is there a short-cut key to make it appear?
View 3 Replies
View Related
Dec 6, 2006
my toolbox has completely disappeared, and i have no idea how to get it back. This is on Photoshop 5.0, i'm currently using CS2 but it would still be useful to be able to use 5.0 aswell. And before you ask, clicking Windows > Show/Hide Tools doesn't work, and as far as i'm aware it's not off screen.
View 5 Replies
View Related
Jan 25, 2006
I've been unable to get all the tools in the Toolbox to function properly. It sometimes helps if I resart my computer over & over & delete the files but it only lasts temporarily. I've called Photoshop & they've never heard of it. I've uninstalled & reinstalled several times as well & it never seems to work.
View 8 Replies
View Related
Jul 26, 2008
The toolbox remains minimized.
The healing tool remains selected. I've tried the following:
1) Reopened program
2) Restarted CPU
3) Reloaded software
View 1 Replies
View Related
Feb 23, 2013
I'm using 2.8.4 in multi windows mode fullscreen. Sometimes the toolbox willdisappear. I have to hit my Windows key and then click on Gimp in the Windowstoolbar to make it come back.
I'd really like to have an option to dock the toolbar and have the dialogs openin new windows. I keep my screen real estate maximized. My tool box is 2 columnswide and squashed to the limit. Not only is it an extra step to undock dialogsin single window mode, I have to widen my toolbox to get to the tab to drag thebox.
I am in no way upset about any of this. Gimp has saved me a few hundred dollars. [URL]....
View 2 Replies
View Related
Apr 29, 2010
Using Windows 7 with Gimp 2.6.8 I can't hide the toolbox. If I click on the x-box the entire app closes. I can't see anything in Preferences. ?
View 3 Replies
View Related
Jul 8, 2013
I have had a bad problem with GIMP 3.8 on Ubuntu 13.04 x64 the last few weeks
Basically, every icon in the toolbox has a large empty space to the right of it. The occurs both in single window view and in modal view.
When I resize the toolbox the icons keep this right space around them, always re-positioning so that most of the icons are not included in the toolbox.
The only way I can see all the tools is to reduce the width of the toolbox to one icon, then they all line up vertically. But I have having it set up like this, and even then the last few are cut off by the bottom of the screen.
I have gone through all the settings menus and can't seem to find anything about it. I removed GIMP with the --purge option and reinstalled; this fixed it for a day, now it's right back to where it was.
View 3 Replies
View Related
Sep 30, 2005
The problem is that I can't get any of the tools in Photoshop Toolbox to work. Tools like Clone Stamp Tool, Healing Tool, Burn Tool, Dodge Tool, Sponge Tool, etc. The person that replied to this problem before advised me to open My Computer>Program Files>Adobe>Adobe Photoshop & then delete a certain file. It worked great but now I can't remember which file to delete.
View 2 Replies
View Related
