I added all the files for Point Oven to the 3ds Max 2011/plugins directory.
PO3DS_PSC_Import_64.dli
PO_Baker_64.dlu
PO_LWO_export_64.dlm
PO_LWO_Import_64.dli
PO_Reader_64.dlm
but I'm getting an error about PO3DS_PSC_Import_64.dli failed to initialize' Error code 127 - the specified procedure could not be found.
Should I have copied some of these files in another directory?
The PO_LWO_Import_64.dli is working correctly.
Any plugin for point to point selection?
This is an importing tool I missed many times at paint.net
This is an oven design in 3D. But I would do it brick by brick, if feasible. Below the picture. Some considerations: I tried to do using Autocad 2012 using the Polar Array new feature, but I can not close the oven on top.
[URL].......
its possible to get vanishing point plug in for elements
View 1 Replies View RelatedI have got a csv file and want to add to the surface but it says error in adding point file.....don't know what to do. Size of the csv is 13MB and contains about 0.2million points.
View 2 Replies View RelatedI'm looking to add a column to my point table that will subtract a fixed number from all my surface elevations. I'm working in 2011 Civil 3D. I've been researching this for the past couple of days and haven't been able to come up with anything solid yet...
View 5 Replies View RelatedI want to add say a circle and an arrow at the two ends of a line. I am able to do it using Blocks for one single line by inserting the blocks at desired locations. But how to do it for say all the lines in a drawing or shape file without customization.
View 1 Replies View RelatedI need to show offset distances from alignment centerline. Is there a way to add this to the point label?
View 9 Replies View RelatedI was trying to add a point as extended data to a block.
Therefor i used this data but i get an error every time:
(setq lastent (entget (CAR (entsel))))(regapp "list")(setq exdata '((-3("list" (1011 . 3277.82) (1021 . 5782.5) (1031 . 369.5) ) ) ))(setq newent (append lastent exdata))(entmod newent)
I need to design a walking track 1 mile (5280 feet) from a starting point and finishing at the same point. I need to go around buildings, ponds, etc. What is the best way to tackle this? I thought about 16 splines at 330', but as soon as the spline is moved the distance changes.
View 2 Replies View RelatedI need to find a way how to insert a point or a * on the center point of a hole and put it on a different layer. The reason for this is - I am a CAD tech for a welding shop and we cut parts out of steel and we use the dxf file format for our plasma table to cut parts. For example : if i have a 1 inch thick plate and want to put a 3/4'' hole in the plate the hole will be distorted because the hole is smaller than the material thickness. For these situation we can use the plasma table to burn a point or a dot on the center point of the hole. But to do this the point or dot must be on a different layer in the dxf.
View 2 Replies View RelatedI am looking for something a lisp or program that would do a light point by point of fixtures in a plan.
[URL]
Civil 3d 2012..I used 3d orbit, it crashed. My points, point groups and newly updated description keys are gone.I have looked at all my backup files etc, and they do not want to display.
View 4 Replies View RelatedIm still new to Civil 3D and i would like to know how to connect inported points using 3D polylines. I imported my points from Excel in a PNEZD format. How do i get the 3d poly line to snap to my points so I can Connect them? someone mentioned using a feature line to connect the points but im not sure how or what that would do.
View 3 Replies View RelatedWhat's the difference between the "Point" Parameter and the "Base Point" Parameter in the Block Authoring Parameter Pallet?
HP DV7 Laptop
Intel Core i7-3820QM 3rd Generation Quad Core 2.7 GHZ CPU
16 GB DDR3 RAM ( 2 DIMM ) / 180 GB SSD
Nvidia GeForce 650M Graphics w/2 GB Memory
Windows 7 Professional 64 bit / AutoCAD Civil 3D 2014
I'm trying to draw a plan of my house in Autocad 2009 but I seem to be endlessly using trim and extend because I can't easily select the points that I want with osnap. Eg. imagine I have a box, and I want to start drawing another box inside it that has each side as 10 units smaller than the corresponding side on the outer box.
Step 1 - I draw a small line from the top left corner of the big box using the endpoint snap, typing in "5" for the length.
Step 2 - I then do the same at right angles to the first line to get me to the starting point of the inner box. This always leaves me with 2 small lines to remember to delete.
Step 3 - Then in order to draw the top line of the inner box I end up drawing to a random length because I can't say "draw until 5 units away from the right hand side of the big box", then I end up trimming it later once I've repeated steps 1,2 and 3 for the next side of the inner box.
I know in my example above I could have scaled the box down or something but that's not what I'm getting at. I really want a way of selecting line start and end points that are a known position away from an existing point.
I have a database of points I am trying to import, and the point data for each point includes a hyperlink. I've created a set of custom User-Defined Property Classifications for all the data types in the point database, and I've created a point file format to use to import the points.
It's a database of existing curb ramps, the data includes things like widths, slopes, some text, and a hyperlink to the Google Streetview at each ramp. I've created a custom point label that will show the data I need to see at each ramp.
All goes great except that the import fails because of the hyperlinks. I've tested it by removing the hyperlinks from a small test portion of the data set, and the test points are then successfully imported. I suppose I can delete the hyperlinks from the entire database, but if there is a way to include the hyperlinks in the point import I would prefer that.
Win 7E 64-bit, Intel i7, 12 GB
C3D 2012
In uploading the Point input data into the AutoCAD Civil 3D 2013 software program, is it possible for me to add more Point Attribute items after Point Number, X, Y, Z? I need to have the chemical results/data attached to the (sampling) Point that has the Point #, X, Y, Z - like Point Number, X, Y, Z, Arsenic, Lead, Mercury in the input .txt (or .csv) file.
View 9 Replies View RelatedHaving a lot of issues manipulating points on paths in Illustrator CC - this is a fundamental feature of creating vector graphics and it's very annoying I'm paying for this and it's just not working. Eating up a lot of my time simply because I can't select or convert or add the anchor.
View 2 Replies View Relatedhow to match up certain points. I have imported 2 point clouds and have tried to use the 'align' tool to specify three points from the source object (cloud) and three points from the destination object (cloud). When doing this, it does not properly align them. The point cloud makes it difficult to select the exact point I would like to align, since there may not be a point at that exact location, but close to it. Does AutoCAD require the points in alignment to match up perfectly or is it capable of doing a best fit?
Also, is AutoCAD capable of creating a solid 3D piece from the point cloud? I would like to take all of my points and make a smooth object.
As a beginner i'm learning day by day how to use photoshop. Among the functions i 'd like to handle with there's the vanishing point (in the filter menu). However i can't modify the angles of my selection to change the perspective grid.
Take a look on this video at 03"57 (it is what i want to do): [URL] ...... Do i have to set something up before.
Is it possible to drag/move a point in an image so that all imaginary lines emanating from that point remain emanating from that point? Something like what's shown in the attachment.
View 3 Replies View RelatedHow to set a default point style for point groups? Whenever I import survey points, I always put them into their own point group, so I can display each day's worth of survey data differently. For some reason, the point style always defaults to a certain style (our control point symbol). I'd like it to default to Basic, so I don't have to change this every time. Is it a template drawing setting somewhere?
View 5 Replies View RelatedFirst time importing into 2012-have csv file that I imported. Coordinates land in right spot. Local system-No transformations/State Plane zones attached. When I look at them with tracking everything is okay. When I export the points they are the same I imported.
When I list the points they are way off?
I'm wanting to use a diffuse colour to alter the iterations in the mesh smooth modifier. I'm using the wire parameters dialogue but am unsure of how to turn the 3 point value of the diffuse (rgb) into linear (1 point) data.
Work Computer - Max 2012, Core i7 3.6, 6GB RAM, ATI FireGL V7700 512MB, Windows 7 64bit
Home Computer -BBC Electron with tape player and a copy of creepy cave
C3D 2012
Is there a 'property' to use the Point Group Name. I need it in the Point Table Style: Title text like this:
I am working on a utility map with water valves and hydrants. I collected my points with a Trimble unit and converted them to shape files. I am unable to snap to these points, how i can use snap to draw my water mains from point to point?
View 5 Replies View RelatedI'm inserting blocks into my drawing and the block has a basepoint and a 0,0,0 point. The CAD guy who usually works with me is off today but he has a keyboard method of switching between the 2 points when inserting the block.
Its a fairly straight forward thing on his keyboard, nothing he has set up but standard in autocad.
I've had a try hitting a few keyboard buttons this morning but can't seem to do it.
I would like to draw a Zig Zag Line, but I want that the line start in point "A" and finish in point "B".
The image below is similar to how I want the line, but I would like to have that "wavy" style. I use Illustrator CS6.
I need to edit a layer's OUT point without affecting the location of the IN point in the composition. [ is working fine for the in point. Then, pressing ]... The entire layer slides to the left so that the out point is there, all right, but the in point has now moved the other way so that it's gone back in time. I want the out point to TRIM the (text) layer and make it shorter, not slide it around so that it's the same length and all it's done is to move.
The text layers will overlap each other, but the thing is that they're of varying lengths (It's AE 5.1, btw...)
I am trying to get point 1234 to show a label that says Point #1234 and then in a grading plan have that same point show up as a spot elevation. I have tried making two point groups "Point #" and "Spot Grades" which include the same points in them with two different label styles for each group, however the point seems to only want to take one label style at a time.
C3D 2012
Win 7 x64
8 GB Ram
Quadro K4000