3ds Max :: Removing Edged Faces
Apr 24, 2013I have edged faces off in my model but as soon as i select something it shows that selections edged faces, how do i turn this off any?
View 3 Replies
ADVERTISEMENT
3ds Max :: Toggle Off Selected With Edged Faces?
Sep 3, 2013How can I toggle off "selected with edged faces" in 3ds Max 2014 always on startup? When modeling, I need to see the clean surface when pressing F4.
View 2 Replies View Related3ds Max :: 2014 Can't Turn Off Edged Faces?
Jul 3, 2013In 2013 I could turn off edged faces. Now, even if I do the same thing in 2014, it actually keeps showing the edged faces on selected object.
View 2 Replies View Related3ds Max :: Viewport Preferences / Edged Faces For Polygons?
Aug 17, 2011just attempting to customize my viewing preferences a bit.
When I am in an editable poly, and the Viewport is set to Smooth & Highlights + Edged Faces...
When I go to make a polygon selection, the edge faces option divides each polygon into two triangles which is just annoying. Maybe I'm just used to newer versions of max where it doesn't do this.
3ds Max :: How To Untick Display Selected With Edged Faces
Oct 15, 2013everytime i start Max 2014 i had to untick the "Display Selected with Edged faces" in the viewport configuration tab...is there a way to untick this permamently?
View 3 Replies View Related3ds Max :: Selected Spline Won't Display Edged Faces In Nitrous
May 10, 2011pre 2012, if you had display edged faces on, the selected splines would turn white - so you could tell what was selected in viewport. using nitrous, this isn't possible for us. Open GL or Direct 3D work fine but not nitrous. or is this a bug?
View 3 Replies View Related3ds Max Modeling :: Removing Overlapping Faces But Keeping Visible Top?
Jan 29, 2011I'm building a tree prop that uses a push modifier to create the outside effect of the shape I want. The problem is that the Push modifier has pushed many faces into others... leaving a bunch of geometry "inside" the model... in essence leaving a larger polycount than needed and wasted.
i tried to draw a cross section view of the encircled area... as if you were looking up the cross section up the tree. I'm hoping to get the geometry to match the "desired" drawing.
Developer of Wall Worm - the 3ds Max Pipeline for the Source Game Engine
CorVex Level Design Plugin
3ds Max 4/Gmax - 3ds Max 2014
Mudbox 2009-2011
WIndows 7 x64
i7 930
12GB RAM
Geforce 480x2
AutoCAD Inventor :: Splitting Curved Faces Into Two Faces?
Jan 11, 2013i got Inventor recently, and i've been working on a model of a longboard just to teach myself how to use the tools in Inventor. right now i'm trying to color areas for the griptape pattern so i drew the 2D pattern and projected it onto the 3D model of the longboard. but when i tried to split the faces of the model along the projected pattern only a few of the projected lines split the faces. for other faces i kept getting these errors:
Create parting line failed Crane.ipt: Errors occurred during update Split11: Could not build this Split The attempted operation did not produce a meaningful result. Try with different inputs.
Photoshop :: Get A Smooth Edged Cut Out Without Gap?
Oct 10, 2012When trying to cut out a piece of an image such as with cmd shift J with anti aliasing turned on, there is a gap between the cut out and the new image about as wide as the marquee. If I turn anti aliasing off there is no longer a gap, but then I have a very jagged cut out, since may of the pieces I'm cutting out are circular. Is there anyway to still get a smooth edged cut out without the gap?
View 4 Replies View RelatedIllustrator :: Creating Edged Shadows
Nov 5, 2012I would like to know how to make that type of shadows. I know it can be done with the pen tool. But is there another easier way?
[URL] ....
Photoshop :: Getting Straight Edged Stroke Around Text
Nov 23, 2011Whenever I add a stroke to text it never stays straight edged like the text, it becomes more rounded. Question is, is there a way to stroke the text with the edges staying straight instead of rounded without having to just draw a box around it or something?
Here's a picture of what I'm going for, I'm fine with making a box around the text (there are other characters, rounded characters like an "O"), but it would be a big time saver if there was a way to do it quicker.
Stroke in Photoshop is on the left, desired effect is on the right. The letter "i" might be a bad example, however the effect I'm looking for is a stroke keeping the shape of the text rather than rounding itself.
Paint Shop Pro :: Curved Edged Rectangles
Oct 18, 2011PSP8. How I make the corners of a vector drawn rectangle rounded. I can remember acheiving it once but can't remember how.
View 7 Replies View RelatedAutoCAD Architecture :: Slab Edged Show Up?
Apr 29, 2011We are working on AutoCAD Arch 2012 and there is a custom edge profile we are using but we cannot get the profile to visualy turn off. We have placed it on its own layer and still can't turn it off.
This worked fine when we were in '04 - but it isn't working in '12... is this a bug?
Photoshop :: Neat Edged Flash Style Pictures
Oct 18, 2005I just started using photoshop again. I haven't used it properly since art classes a few years back and i've forgotten bits and pieces.
i could never make picture in this style of the attached one below quickly and whatever technique i had before i've forgotten so i want to know if anyone has a quick technique of turning normal pictures into this wicked pop-art flash style. I can tell it should be easy but extracting the layers of colour seems to be the hardest.
AutoCad :: Removing Xref From Block Without Removing It From Drawing Block?
Dec 22, 2011Drawing A has a grid system Xref-ed into it. It also has a block reference in it, repeated in various places throughout the drawing.
I Xref-ed the grid into the block to check something, and now I can't get it out. This means that the grid now repeats all over Drawing A as well and is generally being a nuisance.
If I try to unload the Xref within the block, it unloads it in Drawing A too. If I try to detach it from the block, it returns this message: Xref [Xref name] has multiple references. Not detached. If I try to detach the Xred from Drawing A, it returns the same message.
How do I unload the same Xref that occurs in a block in a drawing, and in the drawing itself, independently of each other?
Photoshop :: How To Improve Faces With CS5
Aug 2, 2012how to improve faces with Photoshop cs5.
View 7 Replies View RelatedPhotoshop :: Changing Faces
Apr 14, 2004How do you take a face/body from one pic and put it on another picture and make it look seamless? There is one thread with people putting a face on movie posters and stuff, how do u do that? I can never get it to look right.
View 1 Replies View RelatedPhotoshop :: Swapping Faces?
Jan 1, 2003I have two different pictures opened up on my Photoshop and would like to copy one face on the other pictures face...The pictures are slightly different in size.....and copy and paste do not work,
View 5 Replies View RelatedPhotoshop :: FILTER FOR FACES
Mar 20, 2005I want to retouch peoples faces to look better with some filter (plugin) for photoshop.I use KPT 6 equlizer, neat image or ninja filter.Maybe somebody has good expirience with some other filter?
View 1 Replies View RelatedPhotoshop :: Swap Faces
Dec 21, 2005to swap a face over from one image to another. It is the same persons face but it is twisted slightly and i cant make it look right.
View 3 Replies View RelatedPhotoshop :: Aging Of Faces
May 20, 2004a way to age the faces of people.
i want to change the face of a young person so that it looks as one of an old person.
Photoshop :: Fading Faces
Aug 13, 2004I'm trying to put together a montage of faces which I want to place another pic over so I need to fade the faces. I've tried using fade command, but it doesn't do what I want. In otherwords I don't know how to do what I want...anyone know a tutorial on this kind of thing?
View 2 Replies View RelatedPhotoshop :: Morph 2 Faces Into One
Sep 18, 2005how do i morph two faces into one face.. it is kind of like the pictures people do to predict how their babies would like if the two faces were combined.. a newbie...and i am just curious how it was done..so i can fool around a bit.
View 2 Replies View Related3ds Max :: Selected Faces Still Red When Using UVW Modifiers
Aug 13, 2011I switched to MAX 2012 recently and it's hard for me to texture my models because of selected faces being highlighted red while using modifier like UVW Xform, UVW Map and Unwrap UVW.
On older MAX release when you selected desired polygons to apply UVW Map for example, faces stoped being red, now it's not and I can't see how my texture is applied on my model because of that.
3ds Max :: Texturing Faces Of Same Polygon
Mar 29, 2012I have made a cube, and given a basic cube UV map. The material I want is a standard 2D map (say noise). The problem is that each face gets the same pattern of noise. I would have the same result if I had a basic bitmap as the material.
My solution has been to make a Multi-Sub material, and then use a different noise seed for each side of the cube. This works fine, but it makes it time consuming to do something like change the color of the cube (as I would have to edit 5/6 materials).
So, I am asking, is there a way to either make the UV behave as if each face was part of the same "thing" (spread one noise map over the image/stretch the bitmap). Perhaps make an object use multiple materials (or something like that), so that I can have a Multi-Sub for a greyscale noise, and then a basic color that I can change to effect all of the sides at once.
Photoshop :: Two Faces - Matching Skins
Sep 27, 2011i've got these two faces that i'd like to put on bodies of other players.
Messi (it's the one on the left) fits just right, but Xavi's face looks unnatural somehow.
i tried playing with contrast, color balance, hue/saturation, adding noise, dodge/burn, but nothing worked.
VideoStudio :: X5 - Blurring Faces In Video
Jul 27, 2012I need to blur someone's face (at their request) for an educational video. How do I do this in Videostudio Pro x5?
View 3 Replies View RelatedAutoCAD Inventor :: Compare Two Faces
Jan 4, 2013I would like to compare two faces to see if they are the same face. I have three faces and a hole feature on one of the three faces. I am trying to determine what face the hole is on(top, right, left). I can get the face the hole feature was created on as:
Set oHoleFace = oHoleFeature.PlacementDefinition.Parent.Sketch.PlanarEntity
I can get the three face objects I need to check for the hole on.
Set oTopFace = oExtrudeFeatures.Item(1).Faces.Item(13)
Set oRightFace = oExtrudeFeatures.Item(1).Faces.Item(3)
Set oLeftFace = oExtrudeFeatures.Item(1).Faces.Item(12)
Can I compare faces or do I need to use vectors? I tried comparing the InternalName of the faces but this seems to fail when there is more than 1 hole center within a hole feature.
____________________________
Inventor Professional 2014 64 Bit
Windows 7 Professional
NVIDIA Quadro FX 4600
Dual Intel Xeon E5540 CPUs
16GB DDR3 Ram
AutoCAD .NET :: How To Project Faces To X / Y Plane
Jun 14, 2013I have some faces and i want project them to xy plane (Top view). I want to get exterior boundary line of this model. To do this, i will ignore all dashed lines, but i cannot check a line is dashed line or not.
View 5 Replies View RelatedPhotoshop :: Sun Glare From Teeth Or Faces
Oct 18, 2006way to take away sun glare from teeth or faces to make it match the rest of a face, or to tone down overexposure on skin in a flash photo, so the skin doesnt look too red or white?
View 2 Replies View RelatedPhotoshop :: Creating A Montage Of Faces
Feb 26, 2008I am a novice PhotoShop user and would like to create a montage of my daughter's face pictures using several photos I have taken. I saw one of these once and saved it, but am unable to locate the montage.
View 4 Replies View Related
