Any way to smooth out the side of my helicopter I am working on.
I created the fuselage by extruding the rear egde of the cockpit backwards but because it has so many edges it looks a bit ripply.
I tried creating a new editable poly which solves the smoothnes problem but I cant get it to line up perfectly with the edge of the cockpit
how to smooth out these lines , is there some kind of modifier I can use?
I have this cylinder (purple) that I want to cut into this smooth curved sheet.
I have thought about booleans but I don't understand why the stack closes and how to smooth the new sharp edges created when i do it.
How would you go about it?
The aim is to create a cylindrical opening in the sheet while maintaing the smoothing, while getting the edges themselves smoothed.
My stack is EditPoly, TurboSmooth, Bend, Box.
I am creating a outfit around a basic female model but i was wondering if it is possible to smooth the vertices of the outfit along the body like contouring it to the body instead if selecting every vertices and pushing them in?
3Ds Max 2011
I'm trying to make lego arms currently. I'm using two capsules to make the arms. But you can obviously see two capsules were put together. Is there a way to mush the two objects together to make it look like one? I tried connect and Turbosmooth but it's still noticeable.
3DS Max 2012
Windows 7 - 64 bit
AMD Radeon HD 6570M
Intel Core i7-2630QM CPU 2.00GHz, 6Gb Ram
When i'm working in maya 2011, my mesh is not showing the 3 smooth in the viewport. What's the reason behind.
View 1 Replies View RelatedJust recently learned how to use the cloth modifier. It is awesome. It has worked pretty well, but one problem, I see little squares on my cloth after I run the simulation. Sometimes they are just a shade darker than the material, others, they are completely black, so it makes me think it is the squares from the opposite side showing through.
I am using a chamfer box so that my cloth has a thickness to it and a beveled edge. I tried a plane, but I don't like the way it looks, because it isn't thick enough. How to get rid of the squares? (see attachment).
Also, while I'm here, do I have to always sit through 100 frames when I simulate, or can I just hit simulate and have the cloth drop into place on one frame? I am not animating so I don't need the 100 frame span.
My specs are this quad processors, 8 Gb RAM, windows xp64bit, 3ds max 2011
I know there are many ways to model this but how would some of you go about it? Would you create a sphere then cut out a spline circle for the ports? Would you create a box then turbo smooth it out to a sphere?
View 4 Replies View RelatedI would like to create a simple polyplane in the side view in Maya. When I try to do this nothing happens and the software suggests I start on the grid but you cannot see the grid in the side view.
View 3 Replies View RelatedI have problem with side view, my model appears incomplete. I add a file in word with the problem.
View 4 Replies View Relatedis there a way to change mesh smooth iterations based on camera distance?(e.g. far objects to have iteration 1, and close objects to have 10)
View 3 Replies View Relatedafter I combine a simple poly cube the smooth function does not work?I use merge edge and merge vertices but still cannot get a smooth object..I have tried saving and reopening but still cannot smooth.
View 1 Replies View Relatedim trying to animate a helicopter propellers i want to make sure they dont lose place while rotating?
View 1 Replies View RelatedI am creating a helicopter pad, with cut slope 1:1 and fill 2:1. But when i created a transition between the pad and existing road, i don't know how to. I have added a feature lines and make a separate grading but somehow it didn't work.
I have attached here the dwg file (C3D 2014) .
WS with R2013 & R2014 installed side by side.
R2013 is stating on start up that the Geotechnics module has been loaded and displays the Tab for it.But I haven't installed the Geotechnics module for 2013 yet and it doen't work.
I downloaded AutoCAD on my windows 7 home premium,but when I click on the application it says "the application has failed to start because its side-by-side configuration is incorrect. Please see the application event log or use the command-line sxstrace.exe tool for more detail." I tried repairing it but that doesn't work.
View 1 Replies View RelatedI've got to plot several "half-size" sets of drawings (originally 24x36 drawings) and I am trying to minimize paper waste. I thought there was a way to set the drawings to fit multiple copies side by side but I am at a loss right now.
Civil 3D 2011 Version 2.1
Win 7 x64 SP1
Intel Core i5 3.33 GHz
4 GB RAM
I downloaded AutoCAD architecture 2014 on my windows 7 home premium, but when I click on the application it says "the application has failed to start because its side-by-side configuration is incorrect.see the application event log or use the command-line sxstrace.exe tool for more detail." I tried repairing it but that doesn't work.
View 2 Replies View RelatedThe problem I'm having with Skin Morph is that it's skewing my vertices side-to-side locally.
I'm using Skin Morph to better preserve the volume around the two joints of each finger of my hand model (See Arm1).
The two skin morph targets were created for the index finger while it was in the same position as the second image (Arm2).
I repeated this process, creating skin morph targets for the other two joints on the three other fingers and on the thumb.
The problem comes when I rotate the knuckle joint in any axis, in the third image (Arm3) I've rotated the knuckle downwards and you can see the vertices affected by the Skin Morph modifier have skewed to the left. When I turn the modifier off the vertices go back to their original position - so the problem isn't being caused by something like non-uniform scaling of my model (I reset the transforms before skinning).
The fourth image (Arm4) just shows the basic child/parent relationship that I've setup with the Bones and SplineShapes.
The fifth images show the (perhaps strange) position of the Driver Bone Matrix and the Morph Bone Matrix which could be constributing to the problem somehow.
I've uploaded the file so that you can explore my scene. armrigskinmorphproblems.zip
3ds Max 2013 64-bit Student Version
nVidia GeForce GTX 560
Windows 7 64-bit
Intel i7
I have just updated to Windows 8.1,(32 bit) and when I try running Autocad 2013 I get this message:
C:Program FilesAutodeskAutoCAD 2013acad.exe
The application has failed to start because its side-by-side configuration is incorrect. Please see the application event log or use the command-line sxstrace.exe tool for more detail.
what the "application event log" is or the "command-line sxstrace.exe".
Is it possible within the drawing to have model space and paper space displayed side-by-side like two vertical split screen viewports?
View 3 Replies View RelatedI need to put two pictures side by side to merge one person into a group shot. I had it once, but, the image of the one person was too big, and I could not figure out how to put that picture back and get another one to try.
View 1 Replies View RelatedIn Photoshop CS6, a very important button is missing from the toolbar — the one to show two images side-by-side or above-and-below, and multiple images in other arrangements. I need this button — it’s an important part of my. (BTW, the button is still in Illustrator CS6.)
View 7 Replies View RelatedIm having a problem editing a photo 'face' one side 'left' side is lighter than the right side because of lighting. I was wondering If I could get both sides even prefably the lighter side like the normal side.
Is this possible? Because everytime I try edit the lighter side it still remains lighter.
Is it possible to combine two side-by-side photos into a single photo
View 1 Replies View RelatedWhere can you compare 2 photos side by side in Full Screen in Elements 11? Version 9 has this feature under Display View.
View 1 Replies View RelatedI have two picture files and I just want to create one file, displaying both pictures side by side. I have been reveiwing all of the functions in my Adobe Photoshop Elements Version 11 and I can't figure out how to do it.
View 2 Replies View RelatedI've just recently purchased PSP X4 since they touted that it was much faster loading and more stable (X3 was horrible about crashing). I continue to be amazed at how they (Corel) can just keep digging a hole instead of actually improving this product. I can see why they continue to lose market share.
1) I can no longer open mulitple images at the same time for side-by-side comparison. The work area now will only accommodate 1 open file at a time.
2) I miss not having the file size included in the data box that appears when you hold the cursor over a thumbnail. It was always handy when downsizing (resizing) photos for posting.
3) It is a pain now to have to go back and forth from the "EDIT" tab to the "MANAGE" tab to view full-sized photos (without having to open one at a time). They really screwed the pooch in X2 or X3 (can't remember) when they got rid of the old Organizer format. It was soooo easy to navigate; you had a screen full of thumbnails, you saw what you wanted and clicked it open....just too easy I guess!!! I was hoping they would go back to it for this version. I know in other forums, this change really rankled a lot of users. They just seem to bounce around trying different things. I wonder who the h*ll they use to test this stuff in-house.
I do like the faster speed, but don't know if I'll go for any more versions after this or not (been here since V.7 when JASC owned it). Big mistake selling if off to Corel. I've just about had it and there is some decent up and coming competition out there nowdays.
I am trying to invoke AutoCAD 2012 and am gettting the following error: CUsersatillgrenDesktopAutoCAD.exe "The application has failed to start because its side-by-side configuration is incorrect. Please see the application event log or use the command-line sxstrace.exe tool for more detail.
View 2 Replies View RelatedComputer Asus G50VT, Processor Intel Duo T9400, 4 BG Ram, 2 x 500 GB HDD, Nvidia GeForce 9800M GS 512 MMB
I just move from Win VIsta Ult. to Win 8 Pro 64bit.I installed PSP x4. The installation went fine, but when I try to start the program I get the following error:
The application failed to start because its side-by-side configuration is incorrect. Please see the application event log or use the command-line sxstrace.exe tool for more details.
I am missing Visual C++ runtime files, but I installed VC++ runtime files 2005, 2008 and 2010 both x64 and x86. Didn't work.
I also tried to install PSP x3, same error...
I ran sxstrace.exe but it means nothing to me. See the results below:
=================
Begin Activation Context Generation.
Input Parameter:
Flags = 0
ProcessorArchitecture = Wow32
CultureFallBacks = en-GB;en;en-US
ManifestPath = C:Program Files (x86)CorelCorel PaintShop Pro X4Corel PaintShop Pro.exe
[code]....
I am sure that you must be able to do it...surely..but how can you see images side by side, so that the original is on the left and the edited on the right?
View 6 Replies View RelatedHow to make a banner that shakes/blurs from side to side?
[URL]....
The link above is an image of what I'm talking about. (The black banner that says Diamonds aren't forever)