I have imported 21 cubes in max for a test. Once imported, max see the 21 cubes in 1 object (see the brackets in the image). I would like to detach the 21 cube from the starting object and center automaticly the pivot point. It's possible to do that without script ?
View 4 RepliesWhen I have many objects in a scene and each has a UV-unwrap, the scale (using the checker) looks to be a different ratio from object to object. Is there a way to make the UV editor unwrap to scale, so that the checkers end up being all the same size across the scene?
View 3 Replies View RelatedI have an animated character from which at a certain point i need an object to be 'detached' from the character and animated on its own, problem is as soon as i want to manipulate that part of the character i get this gray manipulator tool that tells me nothing will move, should i give up my whole dream upon this? Maybe i should have visibility turned and switch to a duplicate up to that point in the timeline, problem is i havent been able to move a duplicate either so far, back to hell.
View 2 Replies View RelatedI'm trying to extrude multiple faces, and then get them to rotate along the center of the object so that they can all sort of have the same angle radiating from the center. In the picture, the one on the top Left is my starting point. I would like to rotate those faces, for example, so that they will all be flat (picture on Right which I achieved through vert snapping to grid) but the only results I can produce are the 2 small pictures on the bottom. =(
Is this possible?
If I have imported a large multi-spline object, is there a way to bust it up into separate splines easily -- without having to detach each one individually?
View 3 Replies View RelatedImagine a layer containing 10 squares, each square is isolated (none are touching). I need a quick way to put each of those squares on its own layer. Is there something already built in, or any plugin or action?
View 12 Replies View RelatedIs there a way to have multiple vertices selected at multiple positions (heights) in the z axis and enter a value of 0 and have all of them jump to 0 in the z axis? Seems like a no brainer to me, but can find a way to do it.
View 9 Replies View Relatedcan I snap an object/vertex/edge to another object straight in one axis?
I'm coming from Rhino 3d, where this is possible by holding the shift key.
3ds Max 2012 SP2
i7 2600
16GB RAM
Geforce 560ti OC
I'm going to connect my AI file to After effect. So I had to create lots of layers in order to edit them seperatly in After effects. But it seems like my amount of layers are too large because AE always crashes (not responding -> Force quit)
So I wanna break some stuff down in multiple AI files, but I don't wanna go and select every layer and delete it. That would take too much time. Is there a way to select the multiple objects in Illustrator and delete that but also its layer its in?
I have a logo that I am working with and I need to make it a 3D object for what I'm doing in After Effects. I am trying to make it 3D so I can edit it in repousse because all I really need to do is extrude it.
I've tried the different options in the 3D drop down menu but none of them bring me to edit in repousse.
Also, I know that I can make it 3D in After Effects my making multiples of it and what not but I don't want to go about it that way. Also, I'm working with CS5.5 and the 3D renderer plugin in After Effects is only available in CS6.
I have a PSD full of pre-styled mark-up layers I routinely need inside of my working PSD so I can use the layers for the same repetitious thing.
How does one create an action that not only opens the mark-up layers PSD, but also places it's contents in an open PSD, positioned down in the bottom-right corner of the open target PSD?
The action won't know what the dimensions of the target PSD they are. The working PSD's I need the mark-up layers in is random.
I can do it where an action places another PSD's contents in a target PSD in one click, but all the layers are embedded as a Smart Object. I don't believe there's a way to "un-embed" the layers in a Smart Object.
I have just learned how to apply a watermark or copyright to a group of photographs using an action command. But as the action is running, before each image closes, I get the window asking me to specify image quality (1 to 12). I have to hit 'OK' for each image before it closes, and the action completes the rest.
Does anyone know how to add this to the action or have 'ok' automatically hit so I don't have to push it for each image. A friend of mine has a piece of software that does it automatically, but I cannot remember the name of it and want to know if it is something within Photoshop that can do it. I am currently running PHOTOSHOP CS.
I have a logo consisting of four (4) text elements (see attachment) that I would like to be able to create through an action. The problem I'm having is that the document is not always the same size and PS sees percentages for text placement. I need to have the text placed in relation to each other regardless of the documents size.
View 7 Replies View RelatedI've created a Contact Sheet and unticked flatten layers. So have 8 image layers(as there's 8 photos) and 8 text layers.
I want to create a levels adjustment layer attached to each one of the photo/image layers.
Can I create an Action to apply a clipping levels layer to each image layer
I take an image and change the brightness, color balance and then i resize it, etc..etc..
I now want to do the same actions on multiple photos. Is there a way to do that? Is that the history brush?
Also if there is a way, then can the same be done using batch processing? (as in , i need not open each file manually/ select multiple files to execute the common action on)
When you create multiple outputs in Action, where do the files go? I don't see them on the desktop...like smoke 2012.
View 9 Replies View RelatedI was wondering if i could have an object reflect in a surface inside Action? I mean getting the geometry to reflect in a ground plane f. ex.?
View 1 Replies View RelatedI have a lot of photos which I want to resize to a common longest side, (to achieve appx similarity between verticle and horizontal pics of varios aspect ratios). Is it possible to create an action to do this? I'm using CS3 (and lightroom 1.1) XP SP2. I'm not too familiar with creating actions (yet)
View 2 Replies View RelatedI created a action in Illustrator CS6 (on a PC) which opens PNG files, scales them onto a 8.5 x 11 page, saves them as a PDF into a output folder on my desktop and then closes the page. The action works great and does exactly what I had hoped for.
Here is my issue: I now have a need to do this on multiple files at the same time. Using the Illustrator Help menu, I found out about Batch processing. The tutorial says that a batch can be run on a single file or on a folder of files. Bingo! That's what I want. Problem is, I can't get it to work.
After setting up the batch with the following settings: (note: I didn't use a destination folder because I have the action saving the pdf into an output folder on the desktop).
According to the help page, it said to use Override Action "Open" commands which Opens the files from the specified folder and ignores any Open commands recorded as part of the original action. I thought this is what I needed to open all the files in the folder, because when recording my action, I had to use the open command to open a png file. It wouldn't just let me choose a folder. If I don't have the open command in the action, nothing happens.
My main issue is getting multiple files from within my input folder to open when running the action. The only file that opens is the file that I recorded while creating the action. If I remove that file from the folder, nothing happens at all.
If an image is opened from ACR normally, the base layer will be named "Background". If an image is opened as a Smart Object, the base layer will be named as the filename of the image.
If an action is programmed that creates new layers on top of the Smart Object then selects the base layer, the step in the action will be 'Select _MG_ 1234' or whatever the name of the image file is. If you try to run that action on a different image file, an error message will pop up at the step where the base layer is selected indicating that the file is not available because the action is pointing to a specific image file name.
How does one go about making an action with smart objects generic so that it will run on any image file?
I would like to stretch my extruded shelf using a list of value settings.
I completed the steps in block edit but it will only allow my object to move to my value sets.
In 2D I have no issue.
What am I missing when modifying 3D objects.
See attached blocks.
I am trying to record an action to find the center of a polygon with the following commands
1. Select the object
2. Copy and Paste in Front
3. Select > Object > Direction Handles
4. Cmd+X (Cut); do not deselect
5. Object > Path > Average: choose both axes
6. View > Guides > Make Guides
All is good & well except that step 5 never gets recorded as an action step.
I have Photoshop CS6 and I'd like to know how to create an action to save multiple photos in a batch command. I've been searching the Web, but I haven't been able to locate anything useful on this (except one article for CS5). Seems a bit odd. Anyway, I already know how to create an action, but what I'm stuck on is having the action pause and open a dialogue box so I can do things like name a photo, choose the size I want in the Save for Web dialogue, etc.
View 5 Replies View RelatedI want to prepare mutliple images for press release, that include a small border wtih copyright information. Simply every photo i work on must be submitted with a small border and the same text indicating copyright on all of them.
I import from light room and use a batch action to create the border. Thats simple enough, is it possilbe to create an action or script so that can i drop in a text layer into each of the images without a manually copying the layer text and pasting it into each file ... one at a time .
I am trying to create an action that will make multiple thumbnails of the same image and apply actions to each one to create a kind of contact sheet. I want to do this in order to see what different saved adjustments will look like on the same picture.
View 1 Replies View RelatedIs there any way to bind multiple keystrokes to one function--like say I want slide back to be both D-Left and "," , is there any way to set this up?
View 1 Replies View RelatedIs there a way to have a light effect only one selected object in action? I'm trying to light some text.
View 2 Replies View RelatedInside my current action, I have this Axis+Image with some keyframes on opacity and transformation, also some keyframes on X blur/Y blur in my Media list. How do I recycle this setup for other Action?
I tried the save selected object, but when I load it from other action, using Add Nodes + Media method, only the Axis and Image show up (with keyframes). The Media of it shows empty.
I'm trying to work out how to create an action in Photoshop CS4 to open multiple PDF files, cropped to the Trim Box, then flattened & saved as a PSD or tiff file. Is this possible? I'm hoping so as I have about 200 to run this same sequence on!
View 2 Replies View Relatedwhy do i have this bumps on this object.
View 8 Replies View Relatedhow do i completely flatten an object to determine its true dimensions. I have a door for a car lets say is 1 meter ,yet with the complexity of the curves and angle of the panels on the door if it was to be made completely flat it would be say 1.4 meters. I want to achieve something like the iron man pic but for the door. I tried sticking it in Autocad and converted to 2D but the measurements where of.
View 5 Replies View Related