I am trying to "trace" the shape of a circle on a 3d box using the cut tool to create some edges..using a 2d "circle" as a template...it will NOT create the edges!!..all the tool shows is a "dotted" line but doesn't create the edge or the verts for it.I tried ortho views and perspective along with left/right.
View 2 Replies
I have teached myself working with autocad version 2004 so maybe its not the right way of drawing but I draw 3D objects using solids!
In the past I could take or put dimensions on this solids to print and pass on to colleagues but on our new 2013 version I seem incapable of doing this I can not select a point on a solid and continuously get the message invalid point!!!
working in 3D modeling space using parametric linear! what am I doing wrong? or is it an setting that I need to change?
I have an assembly that was created on 64 bit version of Inventor 2013, the total file size of everything is around 150MB. Even if I use 'Pack and Go' to move the file to another computer running the 32 bit version I get an error when I try to open it which says something like:
'unable to allocate 3GB memory for FBAttributeSegment'
The actually figure is over 3GB but of course on a 32 bit version of windows it is physically impossible to allocate that amount of memory (even with the /3GB in boot.ini hack)
I've performed various dynamic simulations as well as animations within the assembly so I'm thinking that perhaps its trying to allocate that huge amount of memory for a saved state of one of those.
What FBAtributeSegment might be and whether there is any special way to save an assembly to avoid this problem? The name FBAttributeSegment doesn't correspond to any part or assembly names.
I should also add that I have no problem opening it in a 32 bit version of Fusion which again suggests to me that it is something like simulation or animation that is causing this
i'm getting the error shown in subject. view details indicates problem with cooltype.dll. error started immediately after i activated a font in suitcase fusion 3. i was able to run photoshop 32bit to finish job. i deactivated font in suitcase and restarted computer. suitcase is not running but i still cannot run photoshop. what can i do to fix??
View 3 Replies View Relatedjust wondering what the difference is in working in 16 32 or 64 bit? does this effect the end quality of the pic at all?
View 2 Replies View RelatedHere is my OS info:
And this is my system info:
Adobe Photoshop Version: 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00) x64
Operating System: Windows 7 64-bit
Version: 6.1
[code]....
I have a VBA plugin used in Autocad.This plugin works fine in windows xp and windows 2003 server(64bit) but it fails in Win7(64bit) machine. Error is that the pop up window which is MODAL and which should in front is coming in background in case of Win7(64 bit.).
View 1 Replies View Related I have recently installed Photoshop CS6 after previous happy experience with CS3. The software appears to be seizing up when editing a selection in quick mask mode (image or layer mask) under the following conditions:
- 64 bit mode
- image > screen size, especially at 100% maginification
- or image magnification adjusted whilst in quick mask
The red mask appears slowly and only where I move the mouse curser - but will not cover the entire masked area.The software freezes, and I have to kill the process from the OS. Task manager shows its status as 'running' and memory / CPU do not appear to be maxed out.
System info:
Adobe Photoshop Version: 13.0.1 (13.0.1 20120808.r.519 2012/08/08:21:00:00) x64
Operating System: Windows 7 64-bit
Version: 6.1 Service Pack 1
System architecture: Intel CPU Family:6, Model:5, Stepping:5 with MMX, SSE Integer, SSE FP, SSE2, SSE3, SSE4.1, SSE4.2, HyperThreading
[code]...
A rather bizarre issue this. I have reinstalled Elements 10 on a system with Win 8 64 bit. If I attempt to crop a portrait format photo e.g. 2009px x 3034px to 1920 x 2400, the crop frame for the width falls outside the photo. Cropping a landscape photo works correctly but the problem persists even if the portrait photo is rotated to 'landscape'.If I crop the same portrait photo on an XP system, there is no problem.
View 2 Replies View RelatedJust installed CS6 on my new workstation and Photoshop; it freezes upon opening.Every other program I have installed has worked flawlessly, including the rest of the CS6 Suite and Lightroom 5.Both Windows and the Adobe Suite have all available updates already installed.Computer is a new HP Z420 Xeon Workstation, Windows 7 Pro 64bit, 16GB Ram.
View 15 Replies View RelatedIn Photoshop CS6 (64bit), when using the brush tool (with a brush with pressure sensitivity activated), I quite often get a line drawn at the max width selected, as if there was no pressure sensitivity. Everything goes back to normal after I start drawing another line, and happens again after a few lines. It's quite random.
I don't have this problem in any other software (Illustrator CS6 64bit, Painter XII, Sketchbook Pro, Zbrush, ...). I have already checked and I've found some other users on other forums with the same problem.
One example, with a picture of the problem: [URL] Another one, exact same problem: [URL] Some of those users seem to have solved their problem by installing an old driver (6.1.5r3), but they had that problem with Intuos TABLETS in the first place, not a Cintiq 24HD... I have tried that, but unfortunately the driver is not compatible with the Cintiq 24HD.
To test this out: I've been able to reproduce the problem 90% of the times I've tried. if I keep the pen at 1 inch from the display so that it's still recognized by the screen but it's not drawing, then wiggle it a bit, and then I slowly move to the screen and tap it (as if I was starting a line with very low pressure), the problem appears and it makes a large dot, as if there was no pressure sensitivity. As I said the test doesn't work every time, but almost.
This is an image of what happens when I try and make dots in Photoshop. These are done trying to push the pen with the same (low) pressure. The big ones are from when the issue appears: [URL]
I have tried the pressure test in the Wacom utility software and it seems to work fine, it never jump to full even when I try the method I've just described. In the diagnostic page of the Wacom utility software the pressure is always correct, even when in Photoshop there's the brush sensitivity issue.
note: I've already tried to completely re-install my computer + the Adobe software + the lastest wacom driver for my Cintiq 24HD, and the problem is still the same.
system info: win8 64bit, autocad 2013 64 bit,
if open autocad program first, every thing is fine , ribboon is working good. but if derictly open a .dwg file when autocad is not running, the ribbon panel is gone, i tried every method i can find -- reinstall, repair install, type "ribbon" command, reset cui, swich to other worksapce then swich back--- but the ribbon just don't come back.
Both Photoshop CS5 (64 Bit) and Premiere Pro (64 Bit) Crash on Start up. 32 bit version of Photoshop works fine.
Here is the problem signature when they crash.
Problem signature:
Problem Event Name: APPCRASH
Application Name: Photoshop.exe
Application Version: 12.0.0.0
Application Timestamp: 4bbc5b10
Fault Module Name: CoolType.dll
Fault Module Version: 5.7.82.7602
Fault Module Timestamp: 4b980c97
[code]....
Both are referencing cooltype.dll. I ran Font Doctor on all system and non-system fonts and found no errors. Booted without Extensis Suitcase loading. Nothing works. All 32 bit programs work fine.
I installed SP1 and SP2 for MAYA 2014 and the modeling tool kit stop working.
View 2 Replies View RelatedIf the toolkit was working without issues previously, it's possible that your Maya preferences have become corrupt. Which is what might be causing the issue. You can default your Maya preferences by renaming the "prefs" folder located in the following location:
C:UsersUSERNAMEDocumentsmaya2014-x64
Once you have renamed that folder to something like prefsOld restart Maya and if prompted to make sure you select the option to create default preferences. Then check to see if that fixed the toolkit issue.
I'm working out of the Mastering Autodesk Maya 2011 book and am on page 135. (I'm on a MAC)
Tool: Rebuild Curve (after creating curve with): EP Curve Tool
I'm trying to rebuild a curve I just made but when I hit "rebuild" I get the error message:
//Error: Nothing was selected to rebuild. You must select NURBS curves or curve on surface. But it's strange, I DO have it selected. In the Outliner I have it highlighted and the curve is highlighted yellow.
The strange thing is when the curve is not highlighted it is RED? I also don't seem to be able to select it with the cursor - only in the Outliner.
I created the curve with the CV Curve tool by snapping to the ends of 2 other curves and then hitting "enter".
I'm guessing the fact the created curve is red when unselected is telling me something is wrong with the curve but I'm unsure.
When I try and scale anything, I hit the hotkey R and the 3 manipulators appear. No matter what I click on, X,Y,Z,or center, when I move my mouse I get an "automatic" jump increasing the size. I can't seem to get it to do anything but these staged jumps in size. I cannot scale anything down, unless I use the universal manipulator tool. So, for example, if I want to scale a size 2 sphere to a size .8, I would have to use the universal manipulator and Shift-click on one of the matrix corners and that will allow a uniform scaling. I realize that I can always enter the scaling amount in the Channel or Attribute box field, but it may be that I'm trying to visually scale something and entering numbers isn't exactly the best way.
View 1 Replies View RelatedI am using Lines to model out the frame of this sword I am making, every time I apply the surface Modifier it only makes some of the lines into mesh.
Lines No Mesh: URL...
Surface Modifier Applied: URL....
Surface Modifier Applied (Perspective): URL....
I just tried out to trim two NURBS-Objects (e.g. 2 Spheres), but nothing happens.If i select both spheres and go to "Edit NURBS -> Trim Tool" => NOTHING or also if i try to use Trim Tool (without any Object selected), i'am not able to select a NURBS-Object.
I've used the Trim-Tool very often, but now it's not working anymore.
I have this heavy issue, i can't send to back a line, an object or a hatch under other lines. In 2012 i used this feature a lot but in 2013 it's not working very much, maybe 1 time out of 10 and i absolutely can't say why.
HPDRAWORDER = 1 seems to work with a new hatch.. but i can't redraw everything.
Let's say i put an entire floor plan into block then draw over it. (I don't want to start a Xref discussion please) i can't send the entire bloc to the back.I used to do that with 2012, 2008, 2007.. but it's 2013 it's not working, is there a way to correct that?
recently i tried working with the modeling toolkit in maya 2014, and it works great in perspective,but for some reason when im in component mode and I try and make a marquee selection, the marquee does not show up although it does select the component.
After selecting some component and try moving then with the translate handles, it does not move at all, instead it deselect the components.I am able to middle click move components.
So i decided to turn off the modeling toolkit and everything worked fine with the classic manipulators.
I'm having a problem with Maya's vertex/point snapping function. This is a simple thing to do normally but in the 2014 student version (which is full functionality other than having a prompt saying it is a student version upon saving the file), it isn't working.
Basically the process is making a selection of vertices and with the transform tool active, MMB dragging the manipulator to snap the selection to a destination vertex. The pivot point/manipulator of the selection is moving and snapping to the destination vertex on it's own when I hold 'V' and MMB drag, rather than the whole selection moving with the transform manipulator and snapping to the destination vertex. This problem is also happening with the modelling toolkit which is really annoying. I have checked that i'm not in edit pivot mode etc.
The point snapping is working however for objects, but not in component mode as above.
I am running Windows 7, Maya SP2.
I used to drag and drop an image from my desktop in a drawign in 2012 version.
Now is not working and I get the following
i have been having problems with maya where i can't select individual faces vertices or anythign other than the entire model
View 8 Replies View Relatedlets say I marquee select the vertices on a cube in an orthographic view (top view or side view) only the vertices facing the camera get selected. And to clarify, CAMERA BASED SELECTION IS TURNED OFF. Also, not sure if it is related, but backface culling in preferences is also turned off. This usually will not happen in perspective view; but yesterday it did start happening in perspective view as well. And even more strange, it does not affect all meshes in the scene. Only some will react this way.
This bug only recently started happening and it is driving me nuts. I have been running 2013 on this machine since it was released, but not until recently did this bug start to occur; so I am wondering if I accidentally turned something on/off?
i was trying to model a character in Maya and somehow messed up the pivot. The handle stretch beyond the horizon in the scale and move tool, and for the rotate one i can't see the circle no matter how far i zoom out.
View 1 Replies View RelatedI created 3D text in Photoshop CS6 and exported the mesh as an obj. I was able to import the obj file directly into 3DS Max 2013, but could not import it into Maya 2013 and 2014, because both versions cited incorrect data. Is this a bug or user error? Obvious workaround is to use Max to re-export, but would prefer to have it work directly in Maya.
View 1 Replies View Relatedview the screen capture video here: [URL]
Basically, I create a simple mesh primitive box. I set the selection filter to vertex, and select all vertices on one side of the box. If the selection of all vertices actually registers, it simply moves the entire object, not just the vertices selected. I've tried this in all directions, and the same thing happens.. Other times, it chooses to only move one of the vertices, a result I cannot reliably reproduce -- it just sort of "happens". Scale and Rotate all function normally.
This is happening for me in Civil 3D 2011 as well as Civil 3D 2013. I launched "Civil 3d 2013 as Autocad", and this problem doesn't seem to happen. Also, in "Civil 3d 2013 as Autocad", the vertex nodes all select as red, not as blue as seen in the screencast link. I spend all my time in Civil 3D, and would like to find out why this is happening so I don't have to constantly switch platforms.
This has also been posted over in the Civil 3D group, but since it's a regular "Autocad" entity, I was hoping to have more luck here.
I'm running Win7 Pro, 16GB ram, 2.67 Ghz 8 core processor and latest service packs on everything.
Can I make a pyramid has a rectangular base instead of a square?
View 7 Replies View RelatedI was trained in Maya 2008, and recently made the leap to Maya 2013.
When I try to use the Insert Edge Loop Tool, it seems to only select an existing edge loop, and will not allow me to slide along an edge to place the new one. I have even tried to use the Insert Edge Loop Tool on a simple polygon cube, to make sure this isn't a complex mesh issue.
Let me know the solution for Getting "AutoCAD LT has Stopped working" while attempt to print in HP Laserjet M1536 dnf MFP Printer. I have tried the following steps but still i am getting the same Error.
1.Graphics Driver has been updated.
2.Printer Driver has been completely removed and reinstalled.
3.New configuration for this printer has been added.
4. AutoCAD LT 2013 Service Pack 1.1 has been installed.
System configuration: Win 7 -64 bit,4 GB ram, Intel-i3 2120 processor, Intel(R) HD Graphics.
