Having problem when clicking on the "Default In/Out Tangents for New Keys" flyout that it takes precisely 3 seconds before the flyout opens.
I've tried it on nitrous, directx and opengl but all exhibit the long delay.
Today i've noticed that when i copy/paste a timeline from Premiere CC to AE CS6 unfortunately nothing happens. So i can't dynamic link or copy/paste footage in AE CS6. I can only use AE CC. Usually i make my edit in Premiere and then i use the same timeline in AE to do postproduction. If i uninstall AE CC can i be able to copy/paste my timeline in AE CS6 from Premiere CC?
I can't install Premiere CS6 because i use an MXO2 card.I can run AE,Photoshop and Encore CS6 with CC apps on the same machine,but not Premiere CC and Premiere CS6 at the same time.
My work PC says it is W7 64bit, Xeon E5504 2.0GHz ( 2 processors ) with 24GB. I am not sure how fancy that is but it sure has a lot of memory.
I have a 400 page, 13MB .xar
In XDPX8:
-------------
Scrolling the PageGallery thumbs was super fast.
Scrolling the whole document was a bit laggy but just acceptable ( not really ).
BUT the delay between clicking on a PageGallery thumb and that page being rendered was unacceptable ( ~15secs ).
So, unable to navigate at a workable speed, I gave up and split the document into several separate files.
In XDPX9 64bit:
---------------------
It's just the same. If anything the delay after clicking a page Gallery thumb is longer. So I guess memory was never the problem ?
How to turn on by default the tangent lines and thread features (and any other options) on all new base views in a template idw?
View 2 Replies View RelatedCan I apply a default style to points with a raw description not in the description key sets?
When I import survey points into the drawing my description keys will assign specifed styles (and therefore layers) to descriptions it recognises, and a default style (and layer) to ones it does not recognise.
Then if i change raw descriptions in the drawing I can "Apply description keys" and have the styles and layers change based on the changes I made to the raw description. This is fine for descriptions in the key set.
Can I get Civil3D to apply the default style to points that did have a description that is in the DKS but has now been changed to one that is not? As it works for me now, these points remain unchanged in there layer and style.
Civil3D 2014 - Windows7 64bit
Is there a printable list of all configured (default and custom) shortcut keys?
View 9 Replies View RelatedI've just installed GIMP to see if it can replace Photoshop for me. But I experience some weird troubles. When I try to use the text tool I can't type anything because all the keys acts as shortcut keys. Aren't these supposed to be overridden when using things like the text tool? I also have the same problems with dialog boxes. The tab key is used to hide toolbars, but when I open dialog boxes I would rather want to use tab to jump from one input box to another. Plus I couldn't enter numbers because the number keys was shortcuts for zoom level.I guess I'm just doing this all wrong? I'm on OSX Maverick.
View 5 Replies View Relatedis there a way to make "hot" keys so you can get to a function with out navigating ......like flatten an image has none but hue/saturation has ctr-u
and selective color has none ...any tips tricks or insults...... just playin
i waste a lot of time navigating photoshop add those seconds up and you have another work day....
There is very annoying 2sec delay before Nitrous starts to "Improve Quality Progressively"
Any way to make zero delay like in 2012max
if I save image as jpg cs5 hangs for 5 seconds cs4 doesn´t do this are there any solutions to solve this problem ?
View 14 Replies View RelatedI am using now Corel Draw X5 for a month or two, basically testing the use and procedures and transferring my artworks from previous versions to X5.I have noticed a very annoying thing: on almost exactly 5th following command I use in a certain drawing, program stops for two or three seconds, then it goes on as there was nothing.I noticed this kind of behavior in previous versions of Corel Draw when I had larger bitmaps in drawing and program did often a backup. But here it's just not the case. I have relatively simple drawings, not larger than 500K.
It seems as if a program is waiting writing on a page file on scratch disk, but there is no reason: I have w7 64 bit and 8GB of RAM, more than enough.
amatuer photographer (D50 dSLR)
somewhat new to photoshop (around 6 months of practice) and am getting used to it BUT I have a problem:
up unitl this point I have been mainly editing and tweaking still projects but now I'm trying to get into the animation (for another forum )
I have all the images but when I go to Save for Web, it won't let me change the delay at all from the whip-lash fast 0.2 seconds a frame!
It's great.... I just can't have it going that fast and don't know how to extend the delay ...
Update:
Format: GIF
Dimensions: 139w x 206h
Size: 45.66K
Settings: Selective, 128 Colors, 88% Diffusion Dither, 4 frames, Transparency on, No Transparency Dither, Non-Interlaced, 0% Web Snap
Is there a setting in the registry?
I know there is no setting in Preferences.
I told GIMP not to add a delay to my animated gif but GIMP did anyway and now my animated gif is really slow. How can I prevent GIMP from adding a delay to my animated gif?
[URL]....
[URL]....
Edit: How can I save my project without losing my layers so I can work on it again later?
[URL].....
My project is 11-minutes long. There is a lag of around 10-seconds when I am on the timeline and hit <space> or press [>] on the preview control. It wasn't like this when I started the project earlier today.
What can I do to get rid of this lag?
On my Video Studio Pro 5 I have an annoying delay every time I press Play to preview.
I am sure that pressing this button is the most common thing people do and yet it's the slowest one. It takes 2-3 sec each time.
I have pretty fast new computer i5 overclocked to 4Gh and 8GB Ram and working with short (max 10min) 720p clips.
I've download Photoshop CS4 and running it in trial mode. When I use the brush tool for example, the delay in it actually printing on the paper after I click and drag is like 1-2 seconds. I have a pretty good PC, 2.4ghz @ quad.
View 3 Replies View RelatedOn the tool bar (like where the dodge/burn, etc is). . .before I reinstalled - I clicked on a tool and it instantly opened. Now when I click on a tool, I have to hold my left mouse button down for a short delay. It is very annoying. Anyone know what I can change to fix this? The computer etc didn't change - did a fresh reinstall of cs2. . . Oddly, if I right click a tool - it opens instantly. . . but I never had to do that before.
View 4 Replies View RelatedI recently purchased a Macbook Pro and both Apple Mouses (wireless, wired) have small delays making it difficult for fine work in Photoshop.
View 3 Replies View Relatedwhat I want is to set the frames separately and not globally, as it is provided when saving the GIF image.
So, is there any tool to set the delay between the frames but separately?
E.g. I have two frames, let's say f1 and f2, what I want is a delay 10 secs (10k ms) between the f1 and f2, and then a delay 10 ms between f2 and f1.
I notice a rather strange behaviour in Lightroom 4.3 in the Develop module: it appears that the Develop preview ("zoom to fit" setting, I guess that's what 99% of people are using when using the global adjustments) is only updated when moving the mouse pointer AWAY from the slider that controls the adjustment (it doesn't matter if it's Clarity, or Highlights, Shadows, whatever).
I happen to often click somewhere on the sliders range, say somewhere in the middle between 0 and +100, to get an idea what a Clarity ~50 might look like. If I keep the mouse pointer hovering over the knob, the Develop preview will look pixelized/blocky, and not update to a more refined preview.
Only if I move the mouse pointer AWAY, the preview will be updated. It's as if the rendering is delayed until you're really sure you want that setting, perhaps to improve responsiveness/performance? This didn't happen in LR 4.2.
I tried this with a NEW catalog and only imported something like 100 photos to it, and no plugins - the behavior stays the same. I uninstalled the latest AMD/Catalyst graphics driver and let Windows 7 (64bit) "fall back" to a default driver - again, behavior stays the same.
I need an arc that is required to be tangent at both ends. I've attached a picture. The red lines are the arcs, the green lines are the lines I want the arcs to be tangent with and the yellow dashed line is the point at which I want the arcs to end.
Untitled235.jpg
When I start Photoshop my mouse works fine. Then I use the wacom pen of my clintiq hd that works also fine. But using the mouse again, the mouse clicks got a on second delay now. After restarting photoshop the mouse works normal again til I use the wacom pen. One use, and the mouse function is damaged.
Mouse and Pen work best together in other programs like Paint or InDesin. This one second delay of mouse clicks is a Photoshop-Cloud problem. I did not have it in CS3
I deactivated openGL, installed the newest wacom driver, installed the newest graphic card driver.... The whole System is new setted up with Win7.... Nothing worked. It is a Photoshop-Cloud-bug!
Is there a way to set Photoshop back to the start without restarting it? It would be useful to do it with one Click, when I need the mouse after using the wacom pen.
I'm experiencing really strange cursor behavior, better explained here: [URL]...
Also after running Photoshop for some time I start to get a nasty lag. Moving layers, using brushes, everything happens with a 1-2 second delay. Hardware should not be an issue.
If I restart PS lag goes away for a while but always returns. I noticed that closing images doesn't reduce the memory PS is using according to task manager. Every image opened just increases PS memory usage, is this normal?
For coping with RAW file picture, I would like to update my computer from PentiumD cpu+1g memory to i5 CPU+8g memory. However I still have a graphic card with Nvidia GT210 chip and 128M memory on board.
I just want to know whether the graphic card can cope with Photoshop and lightroom? I don't want the card delay the CPU when editing the RAW file in Photoshop.
I added subtitles to the video...but then there were a few seconds without sound (sound is fine before adding subtitles) all along the video sometimes.
View 1 Replies View RelatedI have been using Corel x4 for sometime now and export many graphics. Everything works fine just like before but now on I would say 70-80% of my files when I go to export said file it will take up to 8 seconds for the Convert to Bitmap box to come up. I also have always had the "do not show the filter dialog" checked. Everything else within Corel and my PC is working at the same pace as always.
View 3 Replies View RelatedWhen I first use the mouse to open a menu (Editor mode) it takes a while for redrawing the menu rectangle. Not a great deal because this only happens the first time I open a menu after launching the application. On the other hand, X3 seems to redraw menus just fine and fast.
View 5 Replies View RelatedIn AutoCad LT 2013, on Windows 8, I experience a 1/5 - 2 second delay afte 'enter' on a Copy command. The enter may be used in either right-click command or spacebar modes. This is the only delay I am experiencing in any command used so far. Other than that, the 2013 is flawless in Windows 8.
View 1 Replies View RelatedI experience a delay when i want to select a line or curve in a scetch, part or assembly. Normally when you move the cursor over a line it highlites red within a fraction of a second. Now it takes 3 or 4 seconds to be selected.
is it a wrong setting or a bug. Never had the problem before. Not in 2012 or in 2013.
I have the Layer Property Manager and Properties toolbars docked on the left edge of my screen, with the Ribbon vertically between them and the drawing display. I sometimes 'overshoot' when going for a command from the ribbon and the toolbars pop-up immediately so that I then have to move the cursor back into the drawing space and wait for the toolbar to collapse before I can pick the command (more carefully). Is there a way of setting a delay on the tool bars appearing?
View 9 Replies View Related