when you click onto a selected item to move it or change the scaling, and there is the three arrows that represent X,Y, and Z pop up? Well I pressed something, and now that system shrunk down to the point where I can't move or change the size of anything I select. Below is a .JPEG of whats the problem. I have done everything but wipe my whole computer clean.
View 2 Repliescreate a code to add scales to the scale’s list?
I just want to have the necessary scales, so don’t want to add to the template.
The command function is basically to allow me type the value of the scale and based on that, adjust the properties of the scale. (Name appearing in scale list - Paper Milimeters - Drawing Meters)
Example:
>Command line: setscale
>type the value of the scale to create: 50
set 1:50 to default
Using '09LT and was wondering if it's possible to have different line type scales in different viewports on the same layout tab?
View 1 Replies View RelatedI am a very infrequent user of CAD and still do things like I used to do back in the '90s.
I draw in Model space at full scale--except, and this is why I am posting this question, when I have a small detail I want to be visible.
Can I draw a detail in Model space that is a different scale than the main drawing, or do I have to make it 'larger' by using Paper space and a viewport. Like maybe a block or some procedure I am unaware of.
I have a question about printing an autocad drawing. Currently I have two drawings on the model tab. I have drawn them both 1:1.
Now I need to print them both out on a same A3 paper, with different scales. The other one will be printed in 1:100 and the other in 1:50.
I have drawn a pretty good amount on autocad but this is my first time printing/plotting so I am asking for pretty specific instructions.
I am using Map 3D 2013
I have several drawings in which I want to use a line type (centrex2) at a specific scale. The scale setting is exactly the same in all the drawings but in some the line type is coming out at different scales, all larger, but not the same or to a set factor. All the entities in question are poly lines (2d).
I have checked in all drawings that:
global scale factor and current object scale in the line type manager are the same (1.0)drawing units are the same (unitless)‘use paper space units for scaling’ is always deselected line type generation is always enabled.
my linetype scales in model space look good, when i go to paper space to print the linetypes are huge and way out of wack. what is my problem?
View 3 Replies View RelatedI used the layout wizard to configure 2 vertical viewports as instructed in the manual. Next I try to paste an object in one viewport at a scale of 1:20, engineering imperial. The object appears in both viewports in model space. I only want the object in one viewport and I cannot erase the object in the other viewport, since they both dissappear. I also cannot draw a line in one viewport without it appearing in the second viewport. If I switch one viewport to current paper space the line can be drawn but I want each viewport to be at a different scale. Is there some way around this? Is my AutoCAD LT program capable of doing this?
View 9 Replies View RelatedYesterday, I sent a drawing that I scaled as 1/2" = 1'-0" in an Adobe PDF, and was told by the receiver that the drawing scale was off by 3-4% when they measured it. Hoping that is was the printer's problem, I sent a drawing from another file to FEDEX, and went and scaled that one myself. Sure enough, it's off. It doesn't matter whether it is windowed or brought in a paper space viewport.
View 9 Replies View Relatedhow to make snake scales or dragon scales. I want to make a signature and have the scales be the background.
View 1 Replies View RelatedI just started at this company and each time I try to choose a scale for my viewport I am confronted with a daunting list of hundreds of scales to choose from. Most of them have XREFXREFXREFXREF....following them.
how can I reset this to the default list of scales? Or at least purge or edit this massive list. BTW, the same happens when selecting annotative scale.We are on AutoCad 2008.
I have a question about printing an autocad drawing. Currently I have two drawings on the model tab. I have drawn them both 1:1.
Now I need to print them both out on a same A3 paper, with different scales. The other one will be printed in 1:100 and the other in 1:50.
I have drawn a pretty good amount on autocad but this is my first time printing/plotting.
We deal with multiple architects at our company, all of whom have different standards for their Linetype Scales (on a drawing at a scale of 1/8"=1'-0" some use 36, others 24 etc).
We need to take their Architectural drawings, remove all of there dimension notes etc and create an empty floor plan we put our designs on.
The issue is that we cannot have all of our symbols work with one consistent linetype. We have to go into the block and manually overide the LTS of the individual item to suite the LTS of the architects drawing.
Is there a way we can insert the architect background as an x-ref and have the LTS of our drawing not effect it? Or possibly a LISP/Script that divides the individual LTS of all their entities by their global LTS so everything looks fine in our drawings.
We have had issues with annotative objects in the past with some of the architects drawings so that is not a viable option.
For a project we are currently working on all files are stored on projectwise, all xrefs run through projectwise, so essentially whatever changes are made are immediately avaliable to everyone working on the job. This is great and all, but, one of the companies dwgs have an average of 11,000 + annotation scales. And those dwgs are referenced into ours. Usually in a situation like this we would just get rid of the annotation scales in the original, but since its run through projectwise every time they open and close one of these dwgs it over rides any changes we made (like getting rid of the annotation scales) We dont use annotation scales and i never have, is 11,000+ alot of annotation scales or is that normal? half the time i open the dwgs with these xrefed in it crashes autocad or takes forever.
View 7 Replies View RelatedI can't remember what I did but the HSV/RGB scales won't display in other color selector modes. How can I put it back?
View 2 Replies View RelatedAfter many years, my office has finally come to the realization that we need some standards when it comes to AutoCAD. One of the standards I'm trying to figure out is regarding the pen type settings and various scales.
How to go about setting up one ctb file that would cover printing drawings at various scales, but the line weights will remain proportional to the appropriate scale? Our current method of printing is setting up a 24"x36" sheet in paperspace and printing at 1:1. Sometimes we have to do our drawings at 1/8" and others we can do at 1/4", but regardless of the scale, the drawing is done with the same lines/layers. The current method of plotting is by using 2 different ctb files, one for the 1/4" scale and the other for the 1/8" scale. This seems a little ridiculous. I know there is the "scale lineweights" box, but doesn't that just apply to when you change the plot scale?
My linetypes show up way too big in my viewports at 1/8" scale as compared to my Model space. pslt and mslt both at 1, units are inches, global linetype scale at 80. What am I missing?
View 1 Replies View RelatedCan I have 2 drawings on the same sheet to different scales.
I am trying to make a template for a simply drawing of a property at say 1:100 with a location plan of the area at say 1:1250.
I have just received a drawing, and getting message on excess drawing scales trying to xref it into drawing, how do i change scales, get rid of all different annotation scales how can i purge it?
View 2 Replies View RelatedIs there ANY resolve to be able to print the Densitometer scales from X4? The only one that prints is K, CMY will show on preview but not on the print. Yes, it happens when printing to PDF as well, Yes I have updated to SP2 with a clean install from the DVD (although I am running into other printing issues now).
I must be one of the few who actually print from CD, it would be nice to be able to use the pre-press tools once again.
I have several drawings and which have different scales (1:50, 1:20 and 1:10) all in one dwg file. I made different .ctb files for each of them to make easier to interchange drawings between two different scales. But now I'm plotting each of them onto seperated rolls. I wonder if there is a way to plot all of them onto just one roll?
View 9 Replies View RelatedTrying to set a Phantom line as the property line and also use dashed lines (ACAD_ISO03w100)
I can mess with the ltscale and make it so one or the other reads properly, but never both. The Phantom displays correctly at ltscale: 1, the dashed lines display when ltscale is .1 they are on different layers
I've been using Autocad for over 20 years. Any office I've ever worked in never used custom plot styles.
Can custom plot styles control lineweights of objects at different scales? For example, I have a floor plan drawn for 1/4" plotting the lineweights look fine. Now I want to print that floor plan at 1/8" but many lines now look darker than before. Can I create a plotstyle for the 1/8" scale to control the lineweights?
is it possible to import scales from one drawing to another?
i get many drawings every day from other people and i want to import my own scales from my own templete.
i thought to copy the objects to my own templates but i will loose the layouts from the originals. i will heve then again to import the layouts...
Drawing size on an A4 at different scales,The A4 can have a drawing size up to 29.7x21 meters when printing with a scale of 1/100 while it can have up to 14.8x105 meters when printing with a scale of 1/500.
Does this mean that we need to have different title blocks each time we print in an A4 paper size with different scale?
Software: AutoCAD 2014, AutoCAD C3D, AutoCAD M3D, Revit
Windows 7 (Ultimate 64 bits),
Firefox 20.0,
Kaspersky 2013.
I would like to change our office template to have one text style and one dimension style that shows up at 1/8" tall text in any viewport scale. This would also include setting up the multiple global settings. Is this possible?
View 1 Replies View RelatedI have been able to turn on the annotation for the Mtext, which applies the current annotative scale, but how do I add additional scales to the Mtext object.
ObjMText.Annotative = AnnotativeStates.True
My hard drive died and I purchased a new hard drive. I run Vista Business and have both PS cs3 and PSE. Both programs show my grayscales as shades of purple. It also prints as shades of purple. But I have other photo editing software and it shows grays correctly and prints correctly. Does anyone have any suggestions? It use to work okay before the new hard drive was installed. None of my other software is acting any differently.
View 10 Replies View RelatedFor some reason my CS3 does not show perfect greys. Even when I convert to grey scale the picture looks a little redish. It also prints like that. Whats going on? Because this has not happened until recently.
View 7 Replies View RelatedI have Photoshop 7.0 and all my scales in the color window are in purple, how can i fix this so i get all the scales from 6.0?
View 1 Replies View RelatedHow do I set up a dwt so that linetypes appear the same no matter what the scale of the viewport. I tried AutoCad help but the recommended fix if I am reading it correctly is psltscale set to 1. That didnt work. We normally set our ltscale to 0.5. Should the scale of linetypes be controlled by the scale of the viewport? Isnt the scale of the viewport supposed to be multiplied by the ltscale so that the linetypes always appear the same no matter what the veiwport scale?
View 9 Replies View Related