CorelDRAW Graphics Suite X4 :: Where Did Densitometer Scales Go
Feb 9, 2009
Is there ANY resolve to be able to print the Densitometer scales from X4? The only one that prints is K, CMY will show on preview but not on the print. Yes, it happens when printing to PDF as well, Yes I have updated to SP2 with a clean install from the DVD (although I am running into other printing issues now).
I must be one of the few who actually print from CD, it would be nice to be able to use the pre-press tools once again.
View 11 Replies
ADVERTISEMENT
Mar 18, 2012
why (sometimes) when I export text or graphics as .eps files to my cutter it cuts the same outline up to four to five times and ends up cutting right through the backing paper. I have been using postcut with various corel editions since 1997 with no problems until recently. It also cuts random lines through lines of text which is such an expensive pain in the ass.
I started to use the production manager in flexi sign to cut my designs and same thing happens, except for the random lines but it will make up to five cuts on some objects. All text and graphics are exported the same. Has something in corel newer versions changed in relation to this?
View 7 Replies
View Related
Dec 1, 2010
We are having a big problem with dropping lines of text or parts of graphics. It is happening on 3 different laser systems and 2 different printers.
View 14 Replies
View Related
Sep 5, 2009
Often whatever I'm working on in X4 disappears off the document page when I zoom in or out. It's still there (I can see it in the print preview)and I can print it, but I can't see it no matter what view (e.g., normal, draft, etc.) I select. If I select the entire page I can see the graphic and text handles, but nothing else. The only way I can see my work again is to save it, close the program, and then re-open the file. My computer is a Dell Precision Work Station T3400 running Vista Ultimate with an Intel Core2 Quad CPU, 4GB RAM, and my graphics card is an NVIDIA Quadro FX 570 256MB. All my software and drivers are up to date. The problem occurs no matter what screen resolution or refresh rate I'm using.
View 6 Replies
View Related
Jul 21, 2013
i´m using CRD since X3 so I think i´m quite experienced with all the crashes and uncompatibilities but now I have a problem which I can´t solve.
I made a graphic project which is quite large (2,6m x 2,0m @ 300dpi) and including raster grahics. The CDR file itself has about 400MB. When I tried to export this graphic to the png or jpg at the current size Corel X5 always crashes. I tried almost everything on many computers but always the same problem.
It looks like the project is too large for export. At this moment I desperately need to export the file to jpg or png at full resolution. Maybe X6 is more stable when exports or I have to simplify the project somehow but...
FILE IS UPLOADED here and I need to have it 2,6m x 2,0m: [URL]
View 4 Replies
View Related
Nov 9, 2011
I have a 900 x 500 px image in Adobe Illustrator, which overlaps a bit the canvas on the left side.
When I open this file with Corel, it adjusts my graphics so that it's centered on the screen. The AI file is centered on another point. Also, the canvas Corel creates is A4 sized. I always have to resize the canvas and then manually adjust the position of my graphics.
Question: How can I save an AI file so that when I open it at Corel, the position and size of the canvas will be exactly the same?
View 4 Replies
View Related
Jul 23, 2011
Entire Corel suite freezes on start up - I cannot do anything. Reinstalling also does not work - suddenly buttons on the installer dissapeared - there is no text on them and when I click them nothing happens.
A week ago I have installed service pack 3 and everything worked fine. It has all gone wrong again. And installation of the latest patches does not work anymore.
I am running Windows 7 64-bit and I've got a feeling that is must have something to do with system updates.
View 4 Replies
View Related
Mar 14, 2011
I often create graphics in CorelDRAW export it and inserting it into my MS Word documents and finally convert my documents to pdf. When it is vector graphics, exporting as EPS works fine: The increase in file size is small and lines are displayed perfect independant of how much you zoom in the final pdf document. When I handle bitmaps, I usually export as JPG (or PNG), which works well too. My problem arise when I have a mixed vector and bitmap image. I have imported a bitmap into CorelDRAW and created some lines on top of it. I want to export it as a whole. If I export as EPS, the final result is fine, but filesize has increased considerable. If I choose to export as jpg, the filesize is fine, but the lines are getting slightly blurry. Is there a way to get the best of both Worlds - resonable filesize and perfect lines? Maybe settings in some dialog??
View 7 Replies
View Related
Dec 1, 2011
How on earth do you export bitmaps cropped to the size of the canvas? This seems like the simplest functionality ever but i can't get it to work. For example, I am designing an advert for use online. It needs to be 600px wide x 150px high. I may want to use a background image or a photo that when placed goes beyond the edge of the canvas. Logic dictates i would only want to export the canvas with a web image (otherwise why would i have set an exact number of pixels.) However, Corel insists on exporting everything on the canvas and desktop. Surely it should allow us to choose the bounding area of the exported bitmap.
Just to clarify what I mean, i've included a screen shot showing and example original graphic and the export result. I'm sure there must be an easy way to do this. If it's one like this i can crop it easily, but sometimes a print customer will ask me to send them, for example, a 32pp booklet we have designed for them with each page as a JPG and to crop each one manually is a right pain.
View 1 Replies
View Related
May 9, 2011
X5 Recently have begun missing parts of print out. Tried to duplicate but appears completely random.
Output to both Full colour laser and Wide Format printers will miss either text or part of objects. Today printed the text but not the text effects. Initially closed and reopened, rebooted, However this has become a now daily feature so regardless tried reprint from the same screen so next print has everything included.
Very costly and time consuming - print preview shows all correct but output is not the same.
Running Win 7 64bit 8GB Ram
View 14 Replies
View Related
Jun 19, 2013
I have some Ai files that I need to open in X6 but they use linked images which I have, but when opening in CorelDraw all I get is the basic Ai stuff but not the linked images, is there an easy way to open the Ai file and see it as it was intended?
As a sub note I can't go back to the supplier of the Ai file to make any changes.
View 4 Replies
View Related
Oct 18, 2012
I just used the help file for the first time in ages and noticed all the links to the graphics are broken hence no diagrams etc. I tried to search out where they are usually stored and it gives some weird Address under properties. It's a vba so suppose it's a database? How do I restore the links without having to do a re-install?
As to the pen: How do you stop the annoying over-the-top predictive curve that happens past the node in the next section after a long drag to form the first curve. i.e. you simply want to draw a straight line after dragging out a curved section previously and you get this unmanageable curve to deal with ?
View 3 Replies
View Related
Jan 2, 2013
02012013010.jpg
Blank Blocks behind text and graphics
View 4 Replies
View Related
Dec 6, 2013
After a "format c:" i´m trying to reinstall my corel x5. But after starting the install-progress i only can see this:
What does it mean? I can´t imagine where this comes from?!? How to handle this fault?
View 9 Replies
View Related
May 22, 2011
I am building a new desktop and am thinking about using dual graphics cards for my work in Corel X5. Ive seen nothing in technical specs or min requirements that even alludes to the program being able to take advantage of an SLI configuration (evga gtx 465 superclocked with 1gb ddr5).
View 5 Replies
View Related
Jun 9, 2011
Client supplies me with word document, I make a PDF from it and then from Acrobat create an ESP file, this is done as an eps file is much less likely to cause probs then importing a PDF, I then print from the Coreldraw file with the EPS pages no problem. The problem then arises when I have to then create a PDF file from COreldraw for the client - any EPS files in the document do not appear in the PDF - so there lies the problem.I cannot alway directly import a PDF file (often screws up) even if I save fonts as outlines. Saving as EPS overcomes most/all issues.
View 3 Replies
View Related
Nov 6, 2013
I have a client that I laser engrave parts with a variety of graphics, about 35 different designs that fit on 10 different parts and all the designs are different sizes on the parts. I use a fixture that holds 40 parts, two rows of 20, for each type of part. I have a master file for each part that contains a page with each graphic laid out as in the fixture so that I can simply go to the page and select the graphic in the right position for the fixture and paste it into a "lasering" file. The lasering file is just as many pages as I need to run the order and is much smaller than the master file.
That works fine now and is actually pretty quick and easy to setup, but I just found out that they will be adding about 35-40 designs a month. That will make the master file huge and very cumbersome to manage, not to mention the order sheet (spreadsheet) will get huge in no time at all. I can envision it becoming a nightmare to manage and mistakes will be frequent due to the sheer size of the files.
What I would like to do is have a spreadsheet with the graphic and a quantity and merge that into the lasering file instead of doing it manually. I am very familiar with merging data but I don't know if it's possible to merge a graphic from a database or somehow import the graphic into corel.
View 7 Replies
View Related
Jun 13, 2011
When I checked my computer for any any unused programs I got see this coreldraw (r) graphics suite x5 installed. When I got to uninstall it showed and error message that some sort of setup.xml is missing. When I checked this programs folder I got to see that there are two corel folders [Corel and Corel (2) ] in my C: drive. After checking all the file locations of different corel applications I deleted the Corel (2) foder. After that also corel was not being uninstalled. I don't want to re-format my computer only for this
View 1 Replies
View Related
May 10, 2012
Im using draw x5 graphics software and want to know where to find useful for properly sizing web friendly graphics. I want to build a banner and an icon for my new site.
View 3 Replies
View Related
Jun 10, 2011
how to export png from corel?
View 3 Replies
View Related
Apr 9, 2013
Where is the QR panel on X6.3?
View 2 Replies
View Related
Mar 21, 2012
I'd like to start using Capture but it won't let me assign a hot key - it says "This hotkey is being used already by this system. Please choose another one"
As others have reported - you can't assign any key combination, and the application is useless.
is there a way to capture and by pass this problem?
I did find a solution on the Internet that says to uninstall SnagIt and remove references to TechSmith, but I'm reluctant to do that until I find out that Capture works.
View 14 Replies
View Related
Oct 11, 2013
I have been trying to find a solution to this for a couple days now. The problem is that when I convert my EPS and WMF files to JPG the results look bad. I've tried multiple programs and multiple methods. The only way I get good results are if I open the file in CorelDraw, import as curves, and Export For Web to a JPG. Otherwise, the output jpg file looks low resolution. I have thousands of EPS and WMF files that I would like to convert to JPG. Again, I can use a batch conversion program like FastStone and the results are poor.Is there anyway to automate the high quality conversion?
View 3 Replies
View Related
Oct 11, 2013
my CorelDraw files are always at least 1345 kb when I have at least one vector graphic in the file. The pdf I export from it is also that big. I made a file with just one square and it's already 1345 kb.
I just started a new cdr file and created a square, nothing else.
View 4 Replies
View Related
Jul 25, 2007
how to covert a PDF file to CorelDraw? I have tried saving the PDF as an EPS and then opening it in CorelDraw, but it only displays a grey box which states "Illustrator 7.eps".
View 14 Replies
View Related
Aug 17, 2011
I want to do a drop cap - the option is grayed out i can find nothing in the book on how to activate it.
View 6 Replies
View Related
Jan 31, 2012
SCAN0033.JPG
I have Outsourced these Business cards to the same company. See attached.
One is more vibrant than the other, which were done at different dates.
The process consist of Publishing to PDF and noticing after we received them, both came out Different.
Soon after I opened both PDFs and they were different on my end.
What can I do to maximize color and make them vibrant like the one on the left?
View 2 Replies
View Related
Dec 28, 2013
Every time I input pictures on my computer they seem to be loaded twice one as a normal picture next are (DSCO1230.MPO) what is a MPO file.
View 2 Replies
View Related
Oct 4, 2013
I have worked with CD 8,9,10 and now I am back to Home&Student X6. I would like to import a clipart but would like to select them via connector by viewing the thumbnails.
But connector shows only the CD icon. What can I do to see the thumbnails?
View 7 Replies
View Related
Nov 17, 2011
what I want to achieve is a jpg image, with one of my vector designs over the top of it, for use on a website.
This is how I have been doing things so far. Opening cdr file, containing the vector that i wish to use importing the image, then reducing its size positioning the vector over the top of the image adding perspective to the vector selecting both using the pick tool (dragging the selection square around both items) then selecting export for web.
This has worked for dozens of pictures so far. The problem is, my exported file is way too big, at 900kb. However, if I just export the image, it is 39kb. If i just export the vector, it is 25 kb. Yet when I export both it comes up at 900.
View 3 Replies
View Related
Apr 8, 2013
COREL PAINT X3 does not do a very good job of rendering most of the CMYK images we've been getting in from our Taiwan base, and, due to language problems, we have been unable, despite decades of trying, to communicate the issues. Typically we do the original photo here, something that I used to do, but now the company uses a professional photographer - not wanting to spend big bucks on a professional camera.
His ultra-hi-res RGB photos are sent to Taiwan, where they are cleaned up and converted to CMYK using an unknown color scheme, for use in printing our mini catalog. Then I get the catalog back - in InDesign - with instructions to convert the linked CMYK photos back to RGB for use on the website, etc. The color model that they are using in Taiwan, however, typically has deep black at something like 70,65,65,70, which shows on the screen in Paint as very dark and garish, and it means that if I use the default RGB conversion, it looks that way in RGB as well, and half the picture will be solid black - 0,0,0. I.e., unusable. Oddly enough, however, it prints just fine.Now I'm pretty good with Paint, and I know how to use the tone curve to reset the values in the CMYK to usable levels, but it takes time, usually 3 or 4 tries to get it on the money, and of course in the process I'm compressing the color space by half, so there is an inevitable loss of detail.Of course, if I could get them to send us the original RGB or their cleaned up - background dropped out - version in RGB, then the problem would be eliminated, but no luck so far on that. My question is, is there any way to simplify what I'm having to do?
View 14 Replies
View Related
