I have worked with CD 8,9,10 and now I am back to Home&Student X6. I would like to import a clipart but would like to select them via connector by viewing the thumbnails.
But connector shows only the CD icon. What can I do to see the thumbnails?
I've installed the Trial version of X6 but now I cannot see any thumnail previews.
I only get the Corel icon.
History: I have Corel X4 installed as well as I use a plugin called EngravePro and it does not work with X6,
so I still need to go back to X4 when I need the EngravePro features.
Could the thumnail issue be related to havin 2 different version installed?
CMX Problem.jpg
I don't have thumbnail previews in windows explorer for for my .CMX files. I am using Windows 7 64-bit.
When I open corel draw files normally it will show the small thumbnail of the page but in one of my collegues sytem its not showing (its showing coreldraw icon).
View 1 Replies View Relatedever SP 3 was installed I lost the ability to preview files in their folders and see thumbnails. All there is are icons for the new files. Any files that was created before the upgrade has thumbnails and can be previewed in the folders.
View 9 Replies View RelatedI recently had my computer cleaned and found that I lost photo thumbnail previews in JPEG files. Cpt&CDR files are ok..I'm in PhotopaintX4 and Corel support doesn't go back this far.
View 2 Replies View RelatedCorel Connect not showing thumbnails.I have the paid download version of CorelDraw GS X5 installed on a PC running Windows Vista Ultimate 32-bit. I found that the Corel Graphics - Windows Shell Extension only shows in the CorelDraw installer when "Custom" is selected versus "Typical," even though the shell extension shows in Control Panel. The latest twist is that Corel Connect will show photo thumbnails on the hard drive, but will not show thumbnails for photos on a CD or DVD. Other than a different file structure, a DVD or CD is read only. If I copy a photo from a DVD to the C: drive, Corel Connect will show the thumbnail on C:. Windows Explorer shows the thumbnails on the hard drive, CD, or DVD. Corel Connect will not show thumbnails of the Corel .CDR files on the hard drive, CD, or DVD in Vista but it will show them in Win XP.
Why doesn't Corel Connect display .jpg thumbnails on a DVD or CD? I think there is a bug in the Corel Graphics - Windows Shell Extension in Windows Vista.
In Windows 7 I used to be able to see thumbnails of the first page CDR files in Windows Explorer. Now in Windows 8 all I can see is a blank.
View 7 Replies View RelatedI've been trying to get W7-64 to display X5 thumbnails. I've been trying for months. My efforts have brought me to:
Have you tried this?
Have you tried that?
Have you tried Mystic Thumbs?
It's Microsoft's fault
The best I can do is a kluge I don't want to live with. I've been a Corel user for 20 years. Much as I am attached to the program, this makes it virtually unusable. I work with a ton of files. I need to be able to see what they are before opening them.
I'm disappointed to see this problem has been going on for a number of years. It gives me the feeling the good people who built Corel are all gone now, and pride in the product went with them.
I'd love to learn the real honest-to-goodness Corel fix is jist around the corner, but I can't even find an official Corel position on this issue. Is there one? other than
The problem does not exist
The problem is the user's fault
The problem is Microsoft's fault
I just upgraded from 12 to x5 and for some reason it looks like Corel has chosen to make the file default to only showing the page as the thumbnail. Whereas before the entire file was displayed in thumbnail. This would work fine as long as you only want to keep your design elements all within the page frame, but I don't know one Corel Designer that does that. (only Word and Publisher users do that because they have to)
View 3 Replies View RelatedI've recently installed X4 (running it on Windows 7) and for some reason when I open the scrapbook I can't preview any of the thumbnails - they just appear as a generic symbol (see below). How do I change this so that I can view the thumbnails properly?
I've also changed the settings so that once a bitmap has been inserted, I should be able to double-click to open the bitmap in Photo paint - but this doesn't work either!
Just installed X6 and tried CONNECT for the first time and it doesn't display the thumbnails of the vector images only bitmaps etc.. Any way to correct that?
View 7 Replies View RelatedI've been using Corel Draw and Photo-Paint for many years, on many versions of Windows, and as far as I remember, Windows Explorer has always shown a thumbnail for a .cpt file instead of the plain icon.
I've now got a Windows 7 machine (professional version 64 bit), and .cpt files show up as plain white icons, instead of thumbnails.
In Connect I see only blank thumbnails of my .cdr files. The nice thing of this program should be thati can scroll through my files and look at large thumbnail So I know what iám working on.
View 12 Replies View Relatedwhy (sometimes) when I export text or graphics as .eps files to my cutter it cuts the same outline up to four to five times and ends up cutting right through the backing paper. I have been using postcut with various corel editions since 1997 with no problems until recently. It also cuts random lines through lines of text which is such an expensive pain in the ass.
I started to use the production manager in flexi sign to cut my designs and same thing happens, except for the random lines but it will make up to five cuts on some objects. All text and graphics are exported the same. Has something in corel newer versions changed in relation to this?
We are having a big problem with dropping lines of text or parts of graphics. It is happening on 3 different laser systems and 2 different printers.
View 14 Replies View RelatedOften whatever I'm working on in X4 disappears off the document page when I zoom in or out. It's still there (I can see it in the print preview)and I can print it, but I can't see it no matter what view (e.g., normal, draft, etc.) I select. If I select the entire page I can see the graphic and text handles, but nothing else. The only way I can see my work again is to save it, close the program, and then re-open the file. My computer is a Dell Precision Work Station T3400 running Vista Ultimate with an Intel Core2 Quad CPU, 4GB RAM, and my graphics card is an NVIDIA Quadro FX 570 256MB. All my software and drivers are up to date. The problem occurs no matter what screen resolution or refresh rate I'm using.
View 6 Replies View Relatedi´m using CRD since X3 so I think i´m quite experienced with all the crashes and uncompatibilities but now I have a problem which I can´t solve.
I made a graphic project which is quite large (2,6m x 2,0m @ 300dpi) and including raster grahics. The CDR file itself has about 400MB. When I tried to export this graphic to the png or jpg at the current size Corel X5 always crashes. I tried almost everything on many computers but always the same problem.
It looks like the project is too large for export. At this moment I desperately need to export the file to jpg or png at full resolution. Maybe X6 is more stable when exports or I have to simplify the project somehow but...
FILE IS UPLOADED here and I need to have it 2,6m x 2,0m: [URL]
I have a 900 x 500 px image in Adobe Illustrator, which overlaps a bit the canvas on the left side.
When I open this file with Corel, it adjusts my graphics so that it's centered on the screen. The AI file is centered on another point. Also, the canvas Corel creates is A4 sized. I always have to resize the canvas and then manually adjust the position of my graphics.
Question: How can I save an AI file so that when I open it at Corel, the position and size of the canvas will be exactly the same?
Entire Corel suite freezes on start up - I cannot do anything. Reinstalling also does not work - suddenly buttons on the installer dissapeared - there is no text on them and when I click them nothing happens.
A week ago I have installed service pack 3 and everything worked fine. It has all gone wrong again. And installation of the latest patches does not work anymore.
I am running Windows 7 64-bit and I've got a feeling that is must have something to do with system updates.
I often create graphics in CorelDRAW export it and inserting it into my MS Word documents and finally convert my documents to pdf. When it is vector graphics, exporting as EPS works fine: The increase in file size is small and lines are displayed perfect independant of how much you zoom in the final pdf document. When I handle bitmaps, I usually export as JPG (or PNG), which works well too. My problem arise when I have a mixed vector and bitmap image. I have imported a bitmap into CorelDRAW and created some lines on top of it. I want to export it as a whole. If I export as EPS, the final result is fine, but filesize has increased considerable. If I choose to export as jpg, the filesize is fine, but the lines are getting slightly blurry. Is there a way to get the best of both Worlds - resonable filesize and perfect lines? Maybe settings in some dialog??
View 7 Replies View RelatedHow on earth do you export bitmaps cropped to the size of the canvas? This seems like the simplest functionality ever but i can't get it to work. For example, I am designing an advert for use online. It needs to be 600px wide x 150px high. I may want to use a background image or a photo that when placed goes beyond the edge of the canvas. Logic dictates i would only want to export the canvas with a web image (otherwise why would i have set an exact number of pixels.) However, Corel insists on exporting everything on the canvas and desktop. Surely it should allow us to choose the bounding area of the exported bitmap.
Just to clarify what I mean, i've included a screen shot showing and example original graphic and the export result. I'm sure there must be an easy way to do this. If it's one like this i can crop it easily, but sometimes a print customer will ask me to send them, for example, a 32pp booklet we have designed for them with each page as a JPG and to crop each one manually is a right pain.
X5 Recently have begun missing parts of print out. Tried to duplicate but appears completely random.
Output to both Full colour laser and Wide Format printers will miss either text or part of objects. Today printed the text but not the text effects. Initially closed and reopened, rebooted, However this has become a now daily feature so regardless tried reprint from the same screen so next print has everything included.
Very costly and time consuming - print preview shows all correct but output is not the same.
Running Win 7 64bit 8GB Ram
I have some Ai files that I need to open in X6 but they use linked images which I have, but when opening in CorelDraw all I get is the basic Ai stuff but not the linked images, is there an easy way to open the Ai file and see it as it was intended?
As a sub note I can't go back to the supplier of the Ai file to make any changes.
I just used the help file for the first time in ages and noticed all the links to the graphics are broken hence no diagrams etc. I tried to search out where they are usually stored and it gives some weird Address under properties. It's a vba so suppose it's a database? How do I restore the links without having to do a re-install?
As to the pen: How do you stop the annoying over-the-top predictive curve that happens past the node in the next section after a long drag to form the first curve. i.e. you simply want to draw a straight line after dragging out a curved section previously and you get this unmanageable curve to deal with ?
02012013010.jpg
Blank Blocks behind text and graphics
After a "format c:" i´m trying to reinstall my corel x5. But after starting the install-progress i only can see this:
What does it mean? I can´t imagine where this comes from?!? How to handle this fault?
I am building a new desktop and am thinking about using dual graphics cards for my work in Corel X5. Ive seen nothing in technical specs or min requirements that even alludes to the program being able to take advantage of an SLI configuration (evga gtx 465 superclocked with 1gb ddr5).
View 5 Replies View RelatedClient supplies me with word document, I make a PDF from it and then from Acrobat create an ESP file, this is done as an eps file is much less likely to cause probs then importing a PDF, I then print from the Coreldraw file with the EPS pages no problem. The problem then arises when I have to then create a PDF file from COreldraw for the client - any EPS files in the document do not appear in the PDF - so there lies the problem.I cannot alway directly import a PDF file (often screws up) even if I save fonts as outlines. Saving as EPS overcomes most/all issues.
View 3 Replies View RelatedI have a client that I laser engrave parts with a variety of graphics, about 35 different designs that fit on 10 different parts and all the designs are different sizes on the parts. I use a fixture that holds 40 parts, two rows of 20, for each type of part. I have a master file for each part that contains a page with each graphic laid out as in the fixture so that I can simply go to the page and select the graphic in the right position for the fixture and paste it into a "lasering" file. The lasering file is just as many pages as I need to run the order and is much smaller than the master file.
That works fine now and is actually pretty quick and easy to setup, but I just found out that they will be adding about 35-40 designs a month. That will make the master file huge and very cumbersome to manage, not to mention the order sheet (spreadsheet) will get huge in no time at all. I can envision it becoming a nightmare to manage and mistakes will be frequent due to the sheer size of the files.
What I would like to do is have a spreadsheet with the graphic and a quantity and merge that into the lasering file instead of doing it manually. I am very familiar with merging data but I don't know if it's possible to merge a graphic from a database or somehow import the graphic into corel.
When I checked my computer for any any unused programs I got see this coreldraw (r) graphics suite x5 installed. When I got to uninstall it showed and error message that some sort of setup.xml is missing. When I checked this programs folder I got to see that there are two corel folders [Corel and Corel (2) ] in my C: drive. After checking all the file locations of different corel applications I deleted the Corel (2) foder. After that also corel was not being uninstalled. I don't want to re-format my computer only for this
View 1 Replies View Related