3ds Max Animation :: Load Motion Capture File - Getting Unwanted Keys
Feb 7, 2011
I made a walk cycle (walking forward). I saved the .bip file and what I want to do now is load the walk cycle and loop it a couple of times so that I can fine-tune a couple of things. The problem is that when I load the .bip file from the "Load Motion Capture File", I get many unwanted keys, as if I were loading a MoCap file or something. I want the same keyframes I used in the original animation, just looped. Been playing with Key reduction settings for a bit, but couldn't figure out how to do what I need.
View 1 Replies
ADVERTISEMENT
Nov 18, 2013
I have a list of motion capture, those mocap didn't track the fingers so the hands are always opened. In some of these mocap I need the biped hand to be closed. I've been looking for a solution for about a day now. I think I'm in the good way which is to create a biped layer animation where the hands are closed and link the hands of that layer to the original layer. so I would be able to save that layer and apply it to every mocap animation that need to be readjusted. The only problem is that I'm not sure if it's the better way and I don't know the procedure.
View 2 Replies
View Related
Mar 6, 2012
translate facial motion capturing data (basically 2d point clouds) to blendshape weights. I finished rigging my character and wanted to drive my blendshapes by the relative position of my tracking data, e.g. distance between corners of the mouth drive the "wide" blendshape and so on...
Hope YOU know a solution for this, I believe blendshapes are THE way to create realism in tracked animation but I was not able to find ANY reference to something like that. I'd like it to be customizable and not to expensive, so the imagemetrics faceware service won't do for me
View 1 Replies
View Related
Feb 28, 2014
I'd like scale my biped animation. I have 200 frame mocap animation, all frame has keys. I want scale it to 72 frame. I found how can I scale the keys, is ok, but after scaling the bip01 bone jump there and back.
View 1 Replies
View Related
Apr 20, 2012
There is no motion in my meshes when using set key or auto key.
So lets say I have a cube and set a keyframe at 1 and move it a little to the right and set a keyframe at 13, between 1 and 13 there's no motion from 1 to 13, just it jumping straight to 13. I hope that makes sense, I've tired going to Animate setkey options and checked current manipulator handle, didn't worked.
View 1 Replies
View Related
Sep 19, 2011
If I have "dummies" 1 - 3 positions animated, is there a controller I could add to the curved object to rotate and position it in respect to the dummies? I guess the dummies are acting like motion capture points.
View 2 Replies
View Related
Oct 29, 2012
If I create a facial GUI in maya , is there a way to add motion capture to that? What's the best way to do something like this?
View 1 Replies
View Related
Jul 22, 2013
I'm testing a puppet rig i've made in 3dsmax of a bird and i've hooked up the bones to the motion capture utility in max 2014.
Would be cool to get FULL support for the dual analogue sticks of the windows Xbox controller as i'm struggling to map the controls to how i want.
here's my first test, recorded live from the viewport.
[URL].........
stee+cats
[URL]........
3dsmax subscription
other s/ware:- modo 701 - blender 2.68 - combustion - lightwave - vue - zbrush - tvpaint - toonboom
system spec:- 8gig ram nvidia 8500 512ram winvista 64 intel quadcore 2.4ghz
View 1 Replies
View Related
May 22, 2009
Is there any software of Adobe's that will allow you to do stop motion capture? With OnionSkinning?
Tech Specs-
Camera- Panasonic PV-GS83/ Logitech Quickcam Pro 9000
OS- Windows XP
Current Software- AnimatorDV Simple+ (I just got Adobe's Master Collection CS4 Suite)
Also, check out my youtube channel: [URL]...
View 13 Replies
View Related
Oct 1, 2008
I'm running a legit version of Photoshop CS2 on Windows XP. There's a number of things that haven't worked since I installed. Let's start with this one! When editing text, pressing any of the arrow keys to move the cursor creates an unwanted charachter like & '%# etc. Also, when in Move tool mode, the arrow keys don't respond at all.
View 1 Replies
View Related
Nov 29, 2010
Was wondering if there is a way of getting random camera movements? For example, i am doing a fly through of an earthquake scene and as the camera animates along the street it randomly shakes with the earthquake shocks.
I know I could animate it by hand but I wondered if there was a way (perhaps an expression) to make it more simple?
View 3 Replies
View Related
Dec 31, 2012
If I do an area capture (rectangular), CAPTURE X5 almost always wants to include text such as: "Click and drag to select a new capture area" and/or the pixel location. Yes--this instructional text is include in the capture, as shown below.
I've looked at all the possible settings and tried disabling various options (there aren't that many). Nothing works.
This wasn't a problem with Windows XP. Now I'm using Windows 7, 64-bit.
Here's an example; the text at the bottom should NOT be part of the screen capture:
(Border added to show captured area.)
Sometimes I can manipulate the cursor to avoid this, but often I cannot avoid it and get the capture I want.
I was finding it useful to keep CAPTURE loaded all the time so I create a capture whenever I need to, but this makes it almost useless. (ATI Radeon video driver is up to date.)
View 5 Replies
View Related
Dec 13, 2012
Solutions for shifting keys, like if you need to add 30 keys in the middle of an animation?
View 5 Replies
View Related
Sep 29, 2010
I have two models that are identical other than the faces. However, when I apply a blendshape, in addition to morphing between the two faces, motion is created in the legs of the target. These are FBX files exported from MB 2011 into Maya 2011.
View 1 Replies
View Related
Feb 11, 2011
I need a biped to stay still in an animation for a few frames. What I'm doing is say I copy a pose from frame 10, then I want the biped to remain still until frame 40. So I paste the pose there and fix the feet keys. As a result the biped position is the same in both frames, but when I play the animation I get some unwanted rotations between these frames I can't get rid of.
View 1 Replies
View Related
May 7, 2013
I seem to have accidentally animated Exposure Value (located within the Exposure Control).
I don't know how to eliminate the animation and even though I try to manually reset the Exposure Value by turning of Autokey and then setting Exposure Value to the setting I want, I keep encountering a persistence of the animation.
What I mean is that I might reset the Exposure Value to zero, but then when I scrub the track, the Exposure value starts to change. I cannot figure out how to fix this as no matter where I reset the Exposure Value, when I scrub back and forth on the track, the Exposure Value changes to other values...
I've tried looking in the Curve Editor, but haven't been able to find keys. I also don't see any keys in the track.
View 3 Replies
View Related
Mar 2, 2012
I am tracking points on a moving object, it doesn’t deform, it tracks nice. Using Matchmover. Back in Max, it sees it as a static object, and the camera is moving around it.
Any way to invert the animation between a camera and an object so the other one is the one that moves, but they retain the same relational animation? Did that make sense? Right now the object (represented by a Group of 3D tracked points) is still but the camera moves, I want this opposite, the camera is still but the tracked points move, and it looks the same through the camera.
View 2 Replies
View Related
Jan 9, 2013
I've got a Locator attached to a Curve with a Motion Path - the Motion Path is animated so the Locator moves nicely along the Curve. I now want to swap the original Curve with a new one and have the Locator follow it instead.
Is there a way to simply switch curves and tell the Motion Path to use a new Curve while keeping the animated keys in the Motion Path node?
I've tried playing around with the connection editor but cant manage to connect the new Curve to the Motion Path nodes "geometryPath"
View 9 Replies
View Related
Sep 9, 2013
I'm currently working on a advertisement for a client and I need to creat a kind of ribbon to wrap around like a present. I thought what would be best would be making the ribbon and then using a motion path add it on but also I would add a gravity field to the ribbon so to moved more like a ribbon.
Also with the motion path I have made them and connected my ribbon and for some reason it doesn't move until the last frame and just snaps to that position?
View 1 Replies
View Related
Jan 30, 2012
I have an animation of a wine glass breaking. I simulated it using mass FX and particle flow. I will import it to After Effects, add finishing touches and render out a super slow mo clip like you would see on Discovery HD or Time Warp. In essence, I want it to look like it was shot on a high speed camera.
I tried a test render out of max at 960 fps and importing into AE at 25fps but the results aren't quite white I want.
My question is, what frame rate do I render the animation out inside 3ds max and what frame rate do I import/interpret it in After Effects?
View 3 Replies
View Related
Jul 8, 2011
I've been having this issue with Maya's timelines since my first usage of 2010 (on Windows) and now 2011 on Mac. The problem is an odd one, My keys start to show up "between" two frames in my timeline. This makes selecting and moving, and judging timeline distances super difficult. If I open up the graph editor, I get the same results.
I'm running Maya 2011 x64 Educational SP1 on Snow Leopard 10.6.8 on an 2009 iMac. I'm not sure this has any bearing on what is happening in my timeline, as I've had similar results on a Windows machine a few years ago.
I've been working on this scene for a few weeks now, and only recently did this start happening, near the end of the timeline in the scene. I am working at 24fps REALTIME, which is necessary for the project. I have also tried scaling the timeline up and won, but I get no relief from the problem.
View 2 Replies
View Related
Sep 15, 2011
I made a stupid mistake and started lip-syncing a long piece of animation at 25 FPS instead of 24 which I need to use. I just set it to 24 and it put all of my keys on frames like 10.68 or 54.22, it has become really frustrating to animate with. I was wondering if there's some way to snap these keyframes to solid keys instead of having them on decimals, I don't care if the animation is slightly off, I can fix it later.
View 2 Replies
View Related
May 28, 2013
Is there anyway to delete frame blending in Track Editor in between keys?
View 6 Replies
View Related
Apr 16, 2012
I don't remember how to copy keys on the timeline by dragging MMB.
I tried Shift + S, Ctrl + S and is not working. What is the keyboard shortcuts ?
View 2 Replies
View Related
Jul 31, 2011
i'm guessing in track view/curve editor or in the parameter editor...
View 1 Replies
View Related
Dec 13, 2011
How to copy and paste keys? Can I do it in the timeline or graph editor, how?
View 1 Replies
View Related
Jan 29, 2011
To create an animation similar to the one shown in the page 225, in the tutorial, I created a curve but I am not too sure that was the correct way to create it.
1. Selected the Surfaces Menu.
2. In the font view, using the CV Curve Tool, created the first half.
3. Using Duplicate in the Edit Menu, I created the other half.
4. In the Edit Curves Menu, selected Attach Curves and connected two curves.
5. I, then selected the Animation Menu and created an object to be used as an aircraft and followed the same steps shown in the tutorial and it worked nicely.
View 2 Replies
View Related
May 13, 2009
I am trying to attach an object to a motion path but when i do the object goes to the beginning of the path but when i move the time slider nothing happens and when i move the object it isn't attached to the path.
View 8 Replies
View Related
May 31, 2012
I have animated a biped with 10 bip clips in a Transition Track. I need to insert another clip inside of the set of clips. Nothing worked in trying different things in MM, and I couldn't find any tutorials that are comprehensive. Is there a way to insert a clip inside of a mix rather than only at the end?
View 2 Replies
View Related
Feb 13, 2010
Trying to find the closest thing to 3dsmax trajectory, I'm using a motion trail. Once deleted the specific controller it was used for becomes very very slugish, with over 20 sec to respond.
I tried deleteing all the connections in hypershade and using the delete command but nothing works.
View 2 Replies
View Related
Sep 18, 2010
For certain and obvious reasons i need to delete history, problem is since i never deleted it, certain problems occur, like the very binding of my character to the skeleton is undoed, is there a way out of this mess, i just want the texture to stop moving when animation starts.
View 2 Replies
View Related
