The scene is a 100 meter dash. I have animated one biped character and would like to add four more characters, identically dressed but in different lanes.
1) How can I duplicated the character?
2) how can I get the animation to be specific to each lane?
3) Can I vary the speed using Time Warps in Mixer?
I have a character with animation. Another character is the same(same bones, meshes), but with no animation, 100 times larger in size and I resize the head to make the head looks slimmer. They are saved in different fbx files and I imported them into mb scenes. I select the root bone and "select hierarchy", the export options is shown below. Then select in the same way in the larger character's scene, the importer options is shown below. THE PROBLEM is: after I import the atom, the character becomes shrinked to the same size as the former one and the ratio of head becomes the same as the former one too.
View 1 Replies View Relatedi've got an animated character and have just realised i need to put a watch on his wrist! I've created the watch but how do i get it to follow the wrist? i've tried using motion paths but the watch doesn't rotate to follow the wrist.
View 1 Replies View RelatedWhich is the best type of setup for the Spine ? Which one do you use in your rigs ?
I've tried the following setups:
Simple FK
Spline IK
Awesome Spine
Ribbon Spine
Fk Spine(with stretching similar to the IK one)
I am also looking for a scene file which demonstrates "The Divine Spine".
I'm trying to copy animations from the OpFor Drill Sargent to this new Drill Sargent model. The guy who modeled it seems to have gotten the arms' scales wrong. I used 3ds Max to apply Position+Orientation constraints on the New model to copy animation from the old one. His arms stretch out a lot.
View 1 Replies View RelatedI'm trying to use the same interactive skin capsules for multiple characters. Because the characters have different geometry I can't simply copy the weights. Is there some way to copy the capsules used for interactive skinning to a new model?
View 1 Replies View RelatedIn my scene i have a fully rigged character, with a walk cycle animation on him. what i would like to have is a row of characters walking around. (kind of like how you see military soldiers walk around while in group). The part that is giving me the most trouble with this is getting multiple copies of the same character into my scene.
What i have tried and failed with:
Grouping my full rig and then duplicating.
making instances of my character and messing around with particles.
i have made multiple attempts at trying to use duplicate special.
the only thing that seems to kind of work is making a scene with just one character and importing it into my main scene and changing a bunch of stuff around. with the amount of copies i need this workflow just feels really degrading and tiresome.
When Saving an animated GIF in Photoshop CS3 the animated frames slow when viewed after the save. Therefore any gradient fades etc seem to stutter, about 25% slower than the frame rate set initially.
When the animation is played in photoshop it plays at the right speed, only slows when viewing the file after saving...
I'm trying to mirror an object (wipers). But i can't. Mirror tool not mirrors the animation, just the model, so when i play the animation on the mirrored object, it moves weirdly. Symmetry is nor an option. I'm not using bones or anything, just 3 objects, two with rotation, one with rotation and translation.
View 5 Replies View RelatedI have a very complex hub model that needs animated visibility on certain areas. So I took all the parts I need to fade out and in and wired them to a slider, and did so with everything else that I need.
I don't get a gradual fade. If the slider value is zero, nothing is there but if its even 1, everything is solid.
I am trying to export a rigged character mesh (with clothes and shoe meshes too) using fbx so that i can put the character into UDK. Max wouldn't do it at first. (exporting all the meshes with the textures) that is, it did do the fbx file but udk would always crach importing it.
Then i managed to export the meshes seperatly and udk would import them with the textures moslty ok. But.... then max would not export the animations correctly. it totally ignores the 'range' you specify when doing the export. UDK would import them but they were the wrong lengths because of what max exports. i had to go into max and delete the frames and keys of the animations i did not want exported. that worked. obviously i had to do that for all of my animation sequences.
Now. once i figured out that max would only export animations that way i thought 'a-ha, now i can try exporting the character mesh with the clothes and shoes and rig with the textures. but max won't do it. i even tried to just do the body mesh with the rig as i did before (she runs around naked in udk) but now max won't even export an fbx file that UDK recognises as having a skeletal mesh in it. UDK only sees a static mesh.
Do i need to re-install max? is that a hassle? or does it do a repaire?
I have an animated GIF that I'd like to insert into a regular PSD file that I'm using as the background. The GIF is a foreground object. Another way to phrase my task is that I'm trying to add a static background to an animated GIF. How should I do this in order to preserve the animation?
What I've tried to do is insert the animated GIF into a smart object in the PSD file but I can't get it to preserve the animation, even after making sure all the frames are copied.
why the create animated sequence (Make Preview) will often times freeze and get stuck on one frame even though the time is progressing? Quite often when I create my previews, it will progress to a certain point and the frame won’t progress and it will continue to create the same frame over and over even though the time slider is progressing through the animation. I’m using Max 2011 and 2012 but this has happened in 2009 and 2010. To fix it I have to keep a close eye on the sequence images and stop the preview to restart it at the point it stopped.
3ds Max 2013/2014
Autodesk Inventor & AutoCAD
HP xw8600 Workstation
Windows 7 64Bit
Dual Intel Xeon 2.83 E5440 GHz
8.00 GB of Ram
When I merge an animated camera from another scene, the movement setting keys for the camera and target are there, but it appears that animated exposure settings are not. Is there a way to import those with the camera, as well?
View 9 Replies View RelatedI'm trying to create an animated array with an offset on the distance between objects.e.g You have ten spheres, and when you a controller dummy they all move in one direction (e.g. to the left), but each sphere moves progressively further away from the last one - like an array with an offset.
View 3 Replies View RelatedI have 2 identical files. same character, same rig, same character sets. One has animation. Can I just copy the curves of one character set and somehow put it into the character set of the other file?
View 1 Replies View RelatedMy model has turbine engines complete with blades.
After attaching the engine to the rest of the model, I tried to animate the blades using Cycles, however, because the engine itself is attached with a 15-20º incline, the blades do not rotate around -360 properly. The illustration below shows the blades at the -89º mark.
How do I reset the pivot point for the Rotate Tool, or at least compensate for the offset pivot?
I have several art assets that I have already rigged, skinned, and animated. Unfortunately, the objects have to be re-sized.
There isn't a simple way to simply scale the rigg to match the new size, because then the transforms are incorrect, and the scale on the bones are no longer at 100%. Normally it wouldn't matter, but these objects need to go into a game engine, so it has to be at 100%
No, simply re-sizing the rigg and hoping to just 'reset scale' will not work either.
Save/Load animation will inherit the pivot points of the original animation and paste them onto the re-sized objects, so that does not work either.
Is there a way to transfer a rigg and save it's animation when an object gets re-sized? I'd figure that Autodesk would have made some kind of feature for this scenario, since in game production things will inevitably be scaled at some point.
It's easy to scale everything to it's new size... the problem is... how do I reset it's transforms without the rigg going bonkers?
How do I take the original animations and re-apply them to the newly scaled down version?
I've set keyframes on the Glow Intensity attribute of an object so I can slowly reduce the intensity at certain points. Now I need to create a new expression to give a random flickering to the glowing object as the scene plays, until the glow finally dims out.
But when I select Glow Intensity and try to create the Expression, there is no option now to 'Create New Expression'. The other options are still there, but it seems that at the top I'm left with an option relating to the Animation Curve Attributes (animCurveTU..?)
Is there no way to add a rand() expression to give some flickering to the Glow Intensity if I also have a few keyframes set that slowly dim the overall intensity level? Surely not.
I've tried to manually create the expression in the Expression Editor, but when I have to type in the name of the attribute, it hangs the whole program and I have to kill Maya and restart. Either it will not work that way or I'm missing something.
Maybe another way get the flickering short of manually keyframing the intensity level for the entire sequence.
I have an object with several animation layers. When I clone(copy) it, the new object also has the same animation layers. That should be OK.
The weird thing is, when I start to mess with the animation layers of the second object. If I disable, lets say, layer02 on the second object, it affects(disables) layer02 on the first one. Somehow the objects are connected through the animation layers.
Is this the normal behavior of the animation layers? And if it is, how can I make two separate copies of the animated objects?
I know in max its possible to bake out a spline using an animated objects keys. Is something similar possible in Maya?
View 2 Replies View RelatedI have a hard time copying/pasting graph editor curves from a scene to another, since it`s only a specific part of the timeline, is there some basic rules that are to be observed for things to work properly? Yes after a thousand tries i`m going to have to edit every darn ecking curves accordingly to those i wanted to copy.
View 2 Replies View Relatedwhy my video plays faster than the set animated sequence i have saved in the playback preferences. I have a camera on a motion path and have slow the playback speed to 3fps yet when i play the avi video in quicktime after it's rendered it plays much faster.
View 3 Replies View RelatedFor certain and obvious reasons i need to delete history, problem is since i never deleted it, certain problems occur, like the very binding of my character to the skeleton is undoed, is there a way out of this mess, i just want the texture to stop moving when animation starts.
View 2 Replies View RelatedI am animating with mocap and biped in Max. A character that is walking, the mocap I have is a straight line. Is there a way in the mixer to have the characters walk curve without having a clip of a curved walk?
View 1 Replies View RelatedI run into this from time to time: I have animated some components using dummy objects but then realize that at some point I need to animate them all moving together, so I link the dummy objects to a new parent dummy that I just created. However, most of the time the child dummy objects go haywire, orienting themselves in new directions as soon as I link them to the parent dummy.
View 4 Replies View RelatedI have rigged a character and made it into a character set in which i have locked the scaling attribute , I have then saved this file. I have then referenced this file and and have done a walk cycle animation and saved this file. I have then realised that I needed the scaling attribute when I have added other parts of my scene. Is there a way to unlock the scaling attribute in my walk cycle animation file or will i have to go back and change it in the rigged file, create a new character set and do the walk cycle animation again?
View 2 Replies View RelatedIn the timeline panel in CS6 EXTENDED, you have a video feature, where you can animate three things:
Position Style Opacity
What I would like to know, is: How can I animate rotation of a layer? I want to rotate my layer at an angle and animate it. But when I rotate, the first animation frame is also rotated, resulting in NO animation between the frames.
How do I remove the blues eye lines and text when creating a animation preview?
[URL]
My current scene has 10 animation layers for a character, and seeing every f-curve from all layers, although grey and locked, when I only need to see the f-curves in layer I'm working on is really cluttering the graph editor. My current work around is selecting my active layer in the Layer Editor every time I select a rig control. Simple enough, but a pretty inefficient way of working. I can't seem to find a setting that allows me to just see ONLY the fcurves in the active layer. I imagine some of you out there may have hundreds of animations for a single game character.
View 4 Replies View RelatedI'm trying to animate a moving rope based on simulation data. I know how to import my motion data for individual objects.I've seen lots of tutorials where one uses simulations or soft bodies with IK in order to create a rope. how to use all these features and I want the rope to follow my coordinates exactly. I was hoping I could do something like the following:
1. create points in Maya which correspond to my data points
2. connect the points with a curve
3. loft a circle using the curve as a path in order to make a rope
4. move the points. due to History, the rope position is updated
Is there a way to do something like this in Maya? I've tried, and it looks like ep points do not have key-able channel data, so I can't create animations for them separately. I'm using .mov data file imports to generate x, y, and z motion keys for the points.