after selecting a plant in AEC Foliage Library, I tried to place it into the szene. The geometrie pops up for one second and disappears again. Only the selected pivot is visible and the object is listed in the object-list, but it is not shown in the view-port nor in rendering.
View 3 RepliesI have a jpeg of two people standing in front of some foliage. I want to use the background eraser to remove the foliage.The tool removes most of the foliage but leaves small unerased areas all over. I have to go over it many times to remove everything which takes ages.I am using the default settings for the background eraser tool. The only setting I have changed is the size (to 150).It certainly does not seem as easy to use this tool as the Corel tutorial on background removal makes it seem!
View 6 Replies View Relatedi have got 2 ways to create foliage for architectural rendering. One of them is using proxies and the other is using particle system.I have got another idea.
Use position restricted one polygonal plane with opacity mapped plane.Scatter.Look at constraint with camera.
I have tried everything that i can think of. I use a mac and when i try to load photoshop everything appears to be working normally. I see the box come up and the tools loading and then nothing! Gone! I did a search and deleted any adobe items including the program and tried reinstalling and it still happens. I have tried installing DIFFERENT versions of PS and it still happens. What should I do? Reinstall my operating system? I'm using 10.4.8 and have plenty of memory left as well ...
View 3 Replies View RelatedViewport lag is not connected with graphics card driver. 3ds max 2012 has well known issue - Viewport lag- 1-2 seconds every time using middle mouse orbit/pan.
When You use alt+z or pan tool there is no lag.I have tried disabling wacom hid devices, disabling tablet pc features, changing group policy management, disabling display drivers... and much more. nothing is working.how to map orbit to the middle mouse button by some other command.
i have dual quadcore xeon, not the 6-core one.Also for sure it is not 3ds max issue. windows is a pice of garbage thet inteferes with max. something wrong is going with the middle mouse button.
I have had CS6 for about a month. The past few days when I click to use crop, magic wand etc my photo disappears from the screen. The screen is black.
View 12 Replies View RelatedUp until recently I have been continuing to use VS9 for creating DVDs but I use X2 for editing and rendering video files. I have now created templates in X2 but the video files that are displayed at the bottom of the 1st DVD menu has now twice disappeared relating to 2 DVDs (so 4 times).
The VSP files are 2.0MB and 2.5MB so the data seems to be there but are empty when calling up the DVD menu. My video files are in an external file but that has never been a problem with VS9 and I can't see that being the problem.
All works fine on the day I create them and I can sut down and reopen VS without trouble. When I log on another day all the data is gone. I have wasted many hours and am at the end of my tether.
New to Corel Draw X5. I recently switched from X4 (on Win XP) to X5 on Win 7. I have over 1000 files I created with a CutPath outline. I open the file - assign the new Cut Path outline I created in X5 (didn't know how to import it from X4) and after a few minutes the cutline turns white and I have to keep re-doing it.
Also, quite often the palette I created disappears and I have to keep opening it up when I open new documents.
I am editing videos (that need to be completed urgently) in Corel Pro X4 and have serious troubles. VSP file looks absolutely fine during Project preview. Yet when MP4 file is produced (iphone/ipad HD format as suggested originally by support for the web) – then the sound disappears after a few minutes.I tried to play this MP4 of a few different computers and it looks the same. I am in deep sh…t with all my 20 videos.
View 1 Replies View RelatedI am using VSP X4 on Dell laptop running Windows 7.
When editing the timeline, select and play an individual clip, the audio works fine, on every clip. However, when I play the project, the audio is missing on some clips. If I render the project, the audio is missing on those clips.
When I switch to sound mixer view, some clips show the sound wave, others give the message "loading wave data", which never loads.
I imagine if it was a codec problem, those clips would not play the audio at all.
While working in AutoCAD, Sometimes everything just disappears.
I'll be working. I move a block, or draw a line, copy something, etc.. And after I execute the command, and finish. What I just moved,copied, drawn, etc, doesn't show up. I do a _regen, and EVERYTHING in the drawing disappears. If I zoon extents, everything is gone. I can undo commands, but nothing shows back up. If I save the drawing, and reopen the file. Everything shows back up. Is there a setting I need to click or something? It's getting really annoying. It happened 6 times in the hour.
My company recently upgraded to 2013 (from 2010), and we've had nothing but problems. It's one thing after the other with this version.
I have created a custom ribbon in vb.net. And it works now.
However. To make it work i had to do a workaround because IExtensionApplication.Initialize is apparently run before the Ribbon is created in AutoCAD. To make it work i created a time that runs until the ribbon is created.
But i think this is implementation is flawed since i had to do the workaround, but also because the ribbon disappearse when the ribbon is updated. Say when the user changes something in the CUI menu.
Partial Public Class BenteMenu Implements IExtensionApplication Dim WithEvents WSARibPanel As RibbonPanel Dim WithEvents ReformerRibPanel As RibbonPanel Dim WithEvents CNVPanel As RibbonPanel Dim WithEvents ModelPanel As
[Code]....
When panning/zooming in mid-command, say while drawing a polyline and I need to pan from one side to the other to complete the line, my navigation bar disappears. Very annoying. If I change layouts, then come back, the navigation bar reappears. When I click the User Interface, under the View ribbon, the navigation bar is checked. Unchecking and rechecking causes the navigation bar to reappear. Running Autocad LT 2011.
View 3 Replies View RelatedDefinitely one of the most bizarre things in my 5 years in PS.
I have image with some text. I forgot to do underline, so go back and underline some text. which I need as link indicator for web page link.
I save for web, jpeg looks great, but when copy that jpeg anywhere, to website folder, or evern desktop, the underlined word is no longer underlined.
I use the rectangle tool to draw two rectangles where I use blending options to set opacity to 0 (no fill). But when I draw the second rectangle the first one disappears. How do I see both rectangles at the same time?
Another thing. How do I change linesize for the borders for the rectangle?
I just upgraded to AutoCAD LT 2012. I am having a problem with background jpg's disappearing when you pan. It comes back once you stop but it really, really annoying. I have to trace drawings off of jpg's and I have to do a lot of panning. It didn't use to do this in AutoCAD 2010. Ohh I am doing this in Model space. Is there a new setting or something that I don't know about.
View 9 Replies View RelatedI've got multiple objects selected, and I can set "Use Selection Center" to rotate all around center, but NOT if the animation button is on! "Use Selection Center" disappears! How can I animate these three object on center (or single pivot point)?
View 5 Replies View RelatedWhen I use various sliders to adjust values of modifiers, I will sometimes push the mouse up or down until the cursor wraps around the screen, sometimes multiple times, depending on how much the values are being adjusted.
After adjusting the value, when the cursor has gone off the view of the monitor, it will not return for a minute or longer.
I put some AEC Wall on my scene and then put windows in it. Converted window to Editable Poly to assign material to glass and frame, and when I'm changing glass material properties (diffuse or something) the windows just disappears it looks like it was covered by the wall, I can see only the outer frame of the window because it is deeper then wall.
View 1 Replies View RelatedHaving issue with linked DWG which disappears arbitrarily? It is still linked and the visibility of Imported categories is set to ON, but DWG is not visible in a view. When we were linking it we set Current view only (so we can not see this DWG in other view than in the particular one).The solution is to remove DWG and link it again..What may cause it is that we copied the DWG into all levels because it contains floorplans of all levels. In every level we moved the DWG into correct position and it is working for a while. We did not find a moment when it disappears .
View 2 Replies View RelatedIt would appear that my licensed copy of Lightroom 5, which I downloaded online, has disappeared with the install of CC. In my dock I have a question mark on the Lightroom icon. And installing from CC asks for a license number. Is there a way to retrieve my license?
View 4 Replies View RelatedWhen I turn a layer into a 3D layer it disappears. If i turn draft 3D on it will reappear, or if I preComp it will reappear. continuous rasterize is not on so its not that. Active camera is set in preview window, so its not front view thing.
View 3 Replies View Relatedwhy the content of a Configurator panel dissapears when I leave Photoshop and return? The panel loads fine at startup but when I go to another app and return, the panel is empty. The name of the panel is there, just no contents.
View 2 Replies View RelatedI've recently installed CS6 on a new Win 7 64 bit machine.
I'm beginning to install various plugins (Topaz, Nik, etc.).
I think this is the correct procedure, but let me know if it's wrong: I open Photoshop, go to Edit, Preferences, Plugins, then check the "additional plug-ins folder" and choose browse. I navigate to the main folder for the product I'm looking for. For example, Topaz... I'm using 3 plug-ins: Detail, Remask, Adjust. I highlight the folder, click OK, close PS, then reopen it. I open an image, then go to Filter, and find that all three plug-ins are there. I open each one, make sure that they are activated with my activation key, then close each application.
I then went back to Edit, Preferences, Plugins and browsed for the next plugin folder. In this specific case, it was Portraiture, by Imagenomic. I highlight the folder, click OK, close PS, re-open, and when I look for this plugin under Filter, I see it. But, now, one of the Topaz plug-ins are gone. It always seems to be the Topaz Adjust. If I navigate back to it, re-do the plug-in from PS, then the Imagenomic plug-in disappears next time I open PS.
In each case, I just highlight the main folder (Topaz, or Imagenomic), not the Topaz Adjust folder (though I did try this, and it made no difference).
When using the crop tool, and I expand the cropped area outside the original image, the image disappears and the area turns white. How do I turn what ever "feature" this is off?
View 2 Replies View RelatedI created the text with a drop shadow.
But as soon as I flatten the image or merge visable the drop shadows disappear.I had to actually take a screen shot in order to show what I'm talking about.
CS6 Photoshop. Why does brush cursor disappear under 20 pixels?
View 2 Replies View RelatedI am on a Mac Pro with Magic Trackpad. Using Photoshop CS5, the cursor/pointer disappears after a while, and I have to switch to another application, then back to Photoshop to bring it back. The pointer does not disappear over the image window, just over the tool palettes, toolbar, menus, etc. This is a recent development, and I've only ever seen it in Mountain Lion. None of my previous systems exhibited this behavior.
View 2 Replies View RelatedSince uprading to X5, virtually every file with text that I open has a problem. All text (artistic or paragraph) is visible when selected with Pick Tool but when Text Tool is selected, the text "disappears" either partially or totally. Very difficult to edit! Invisible text areas can be highlighted but not seen.
On the same page, when editing different different blocks of text, some have become totally invisible, or, just at the bottom of a paragraph, or just as a strip down the right hand side of artistic text (almost as though a white box was placed over it). Where there is a red underline, indicating a possible spelling mistake, the red line is still visible althought the text is not!
It is invisible in any Text Tool View - Enhanced - Wireframe etc.
Text reappears if I click on bottom middle handle (eg to flow to another paragraph) but as soon as released, it disappears again.
Ctrl W works rarely and only partially. I have tried different basic fonts with exactly same results. (eg Arial, Times NR)
Select text with Pick tool and there is full text again.
In the nature of my business I hardly have a file without text in it!
I have a georeferenced drawing with aerial photos and linework that I have Xref'd in a recent survey drawing. I checked that the coordinate systems match and the xref shows that it is loaded and the layers are listed as on and thawed.
However, the xref is not visible.
I tried a new blank drawing using the Map 3D template, same coordinate system. Same thing happens. However, this time, I noticed that the xref is visible when zoomed out. When I zoom in, it disappears. Screen shot attached.
I have a drawing xrefing another drawing which has the ecw attached to it - if I change the UCS the ecw disappears.
So the image only shows when the ucs is set to WUCS - I should also note that just the image disappears I can still see the image frame.