I'm trying to render some passes in Maya 2013 and Mental Ray using proxy assemblies. The trouble is that none of the passes that do some kind of material definition override ie AO, camera depth work correctly with proxies. I have read a few posts where people have said that these passes need to be applied in the render globals when exporting the proxy file. This method works correctly in Maya 2009 and fixes the issues, unfortuently this method does not work in Maya 2013.
I updated a working cad station with the lastest pathes. It loaded the new MS Dot Net framework 4. Now Acad crashes if you open it, see below. If you click on an existing drawing it opens and you can work with no problems.
My question is - Is Acad 2011 compatable with the new DotNet 4? The fault module below is DotNet. The old drawings were created using 3.51 DotNet so it looks to me it tries to use the dot net 4 on new drawing.
Problem signature: Problem Event Name: APPCRASH Application Name: acad.exe Application Version: 24.1.208.0 Application Timestamp: 4dbf9c16 [code]...
Last week everything was working fine, this week my render window in vacation. Or something.Hit Render frame or even IPR (doesn't matter what renderer I use) and no render window pops up to chew on the image. I get a progress bar and the .IFF is saved in my project folder, but no render window. No error messages that I can see either, maybe I'm not looking in the right place.
this has been only happening since updating this morning from 13.0.1 - 13.0.2...I have a problem where if I create a new curve layer and then press the preview button on/off it fails to re render the preview and nothing else happens until I OK it. I also notice that it creates history entries on the history panel like I'm making adjustments? Weird!
There's been a few other noticeable things too. The liquify window now doesn't draw as nice and smoothly as it did with 13.0.1. The cursor jitters a lot and control isn't as smooth.
Each time I want to have batch render with 4 camera views. I thought it would provide me with elements along with it. But it just brings me only one file as I set .png.
I know it works with State Set by changing camera view. But Batch render should work too.
I want to know if there is a command that passes all entities (lines, text, etc.) to a single layer, but that the institution holds the color and line style assigned according to the original layer that contained it.
Up until two days ago, my Photoshop Elements 11 installation worked just as I expected. Since then, when I launch, it goes through its startup, displays the editor interface and then quits. The only error message I get is from Windows (version 7) informing me that the program has stopped working
When I try to backup my catalog to DVD it appears like it is working then a box opens with "Elements Organizer" at the top. At the bottom it says, "Disk Creation by Sonic Solutions" and in the middle there it says "Writing Disc" with a progress bar under it. This displays for a while but the progress bar never goes above 0%.
After a while (like 5 minutes) a Windows Error message appears that says "Elements 12 Organizer has stopped working. A problem caused the program to stop working correctly. Windows will close the program and notify you if a solution is available"
There is no other error information displayed that indicates what the error is however I went to the Windows Event Viewer and found the following Event:
I have recently discovered what I think could possibly be a bug when using the OpenEXR format with Mental Ray passes and color management in Maya 2011 & 2012.
For example If I create a scene using the below steps:
1. Enable Color Management (default linear work-flow)
1. Create a sphere and assign a Maya material or a mia_material_x_passes shader to it (textured)
2. Add the sphere and light to the masterLayer or any custom layer.
4. Create a beauty pass, and associate with layer
3. Change the output image format to OpenEXR
4. Render and the color looks correct once a gamma correction of 2.2 is applied. See image attached goodColorSpace.jpg
However, If I add a (CGpost) pass to the same layer; for example a cameraDepth or Object Normal. The color space for the beauty and even the masterlayer passes are all washed out. See image attached badColorSpace.jpg
It seems that when using Color Management and combining (illumination) and (CGpost) Pass Groups in a single layer with OpenEXR is creating this outcome.
I should add that changing the frame buffer dose not work either, same result with 8bit Int --> 32bit Float.
I have attached 2 images which show that by simply combining a CPost (cameraDepth) pass with an Illumination (beauty) pass creates a very different looking color space.
Catalog fails to load in Photoshop Elements 5.0 on windows 7 operating system. After installation, the "edit" portion of the program runs regularly but the "organize" portion fails to load the catalog.
Problem in Photoshop Elements11 Editor The Organiser works OK.OS = Windows 7 with Internet Explorer 11Error message = 'Microsoft Visual C++ Runtime Library Error. Program: C: Program Files (x... This application has requested the Runtime to terminate in an unusual way.
During installation of Elements 12under Windows 7, while installing Shared Technologies installation stops with error DF 037, and then reverses the entire process. I found the corresponding errors in the installation log: Unable to delete a number of directories under: c:Program DataAdobeCamera RawLens profiles1.0Tokina I deleted these directories manually, but the problem persists and the deleted directories are back.
I just upgraded from PSE 7 to PSE 11. Everything seems to have installed and the organiser loads, but I cannot get the editor to load. When selecting editor mode, it attempts to load but then crashes, a window pops up "Adobe photoshop elements 11 has stopped working".
I made a shortcut of the editor to desktop, but it crashes as well. This has happened since install, the editor has never worked.
System: meets all minimum requirments for software to run.
Just installed version 11 of PhotoShop Elements. In trying to convert the Version 10 Catalog to Version 11, the conversion fails. I have repaired and optimized the Catalog with Version 10, but still no luck with the conversion. A
Just installed elements 12 (on windows 8), built a catalog but can't load jpg files taken on an LG phone. The pictures load into picture viewer and into elements editor (at which point they are then in the catalog), but I can't import directly.
nothing was imported, the file or folders selected to import did not contain any supported file types or the files are already in this catalog.
the files are jpg and they are not in the catalog.
Ive noticed (scanning the forum) that other people have had issues with LG phones in previous versions of elements
A few months ago I successfully loaded Elements 11 onto my desktop. As we are going on holiday decided to load also onto my laptop. As laptop does not take discs, I decided to download as a trial and then put in serial number. It seemed to download alright but every time I have tried to instal I get the message "Installation failed to initialize". This has happened many times and I have tried rebooting etc. At one stage they got me to download Adobe Application Manager, but it was not explained, or identified, why. Adobe Application Manager seems to be for more advanced Adobe products. I have also got Adobe Download Assistant, which seems appropriate.
Organizer and Editor launch after computer restart. But, after exit the program, only Organizer will re-launch- Editor won't. The PSE Editor PROCESS continues to run in the Task Manager even AFTER I close the Editor. - and ONLY if I END the Process in Task Manager ( or re-start the computer) will the Editor then launch. Did a clean install. Problem continues.
I updated Camera Raw today (12-14-12) through the Adobe Software Updater. Now when I start PSE 11, I get a message that the software has exceeded its activation limit.
I rebooted the computer, and the same problem re-occurred. Upon startup, PSE 11 pops up a message that the software activation limit has been exceeded.
Let me be clear, I bought the application from Adobe, I have a valid license that was delivered from Adobe via email, the software has only ever been installed once, on this machine.
I had PSE9 & PRE9 installed on my Windows 8 machine. Upgraded to Windows 8.1, disliked it, reinstalled 8.0 and am trying to put my computer back to where it was. No problem with CS4 re-installation but PSE9 & PRE9 reach almost the end of the installation process, then roll back the installation.
I upgraded from version 8 to 11. I tagged many images with people tags. I had 4 people tags. After importing, the images still show the tags. However, under people view only two of the tags resulted in stacked photos. The other two tags report "no people exist in this group" if the tag group is selected. Why aren't the photos stacked for the people tags I prviously had tagged? How do I find all images with each of hte tags?
SurfaceBody.GetExistingFacets( ToleranceIndex As Double, VertexCount As Long, FacetCount As Long, VertexCoordinates() As Double, NormalVectors() As Double, VertexIndices() As Long )
This works fine in VBA (Inventor 2014). But when I start using the same in VB.NET (VS 2012) all declaration as long shows as integer and fails on compiling. If I change to integer compile passes but fail on executing in Inventor 2014.
This problem has existed since I purchased a replacement laptop and reinstalled PSE 8..I have a little less than 8,000 photos and I back up to an External HD..I have read the earlier extensive discussion on this topic which seemed inconclusive as to whether it could be resolved.The problem seems to exist in PSE 8
The editor program in PSE7 does not properly recognize the screen size of my monitor. Some photos and parts of menus fall outside the viewable area to the right side. How can this be fixed? Can some setting be easily changed? Do I need to reload some part of the program?