Actually I can create the map by itself and its ok. I can render without FG and its ok. If I Render with FG, right after it creates the map, it crashes.
3ds Max 6.5 - Max 2013
Windows 7 Intel Core 2 Quad Q9400 2.13 GHZ
64-Bit, 8 GB RAM
how can i open and edit the drawing created by autocad 2011 into autocad 2007???
View 7 Replies View RelatedNever had this issue when running past versions of Autocad but every time i try and hatch using 'pick internal points' the program crashes. "FATAL ERROR - Out of memory - shutting down" message comes up every time. Hatching by selecting an object works fine but most of time this option is unusable.
2.66ghz
3.25gb ram
windows xp 32 bit
NVIDIA Quadro FX 570
Let me start this off by saying that I am completely new to Revit Architecture. Just recently I got the program off of the student site and have been looking forward to learning how to use it. However, it seems as though I am stuck with a problem that will not allow me to use the program at all. Every time I try to create an object, be it a square, line, or column, Revit experience "a fatal error" and needs to be shut down. I have tried to reinstall Revit but it hasn't worked the situation in any way. What could possibly be going wrong that is causing this program to fail at its most basic functions?
View 1 Replies View RelatedI created a number of 3D blocks to be inserted into a 3D model of a building. I created the blocks in a separate drawing first; i defined them locally, then, when i had them the way i wanted them, I used "wblock" to save all of these blocks to a folder.
I then opened the 3D building model and tried to insert one of my new blocks. I repeatedly get the following:
"AutoCAD Application has stopped working"
with the following info from microsoft:
"Description:
Stopped working
Problem signature:
Problem Event Name: APPCRASH
Application Name: acad.exe
Application Version: 24.1.208.0
Application Timestamp: 4dbf9c16
Fault Module Name: KERNELBASE.dll
Fault Module Version: 6.1.7601.17651
Fault Module Timestamp: 4e21213c
Exception e053534f
Exception Offset: 000000000000cacd
OS Version: 6.1.7601.2.1.0.256.48
Locale ID: 1033"
I have tried repairing my installation of autocad with no improvement.
i tried opening the drawing of the block itself, copying it, and pasting it via the "copybase" command into the other drawing with the same result.
Occasionally, autocad will ask me if i'd like to debug the program (and visual studio opens) -- it mentions a "StackOverflowException" within acad.exe, and also mentioned "windowsbase.dll".
I am using windows 7 pro x64 and autocad 2011.
CPU: intel i7
Graphics: NVidia GeForce GTS 250
8GB DDR3 ram
The autocad error-reporting dialog never gets launched as it is forced to close before this point.
Someone in the office is running AutoCAD 2011 (Windows 7) and the program keeps closing itself just saying fatal error. It seems to happen when a command is entered, particularly while editing text which seems to close it every time. It's not limited to editing text though. It happens on multiple files as well. I've read there were some issues with 2010 closing while editing text but I can't seem to find anything about 2011 having problems with it. She restarted her computer and it seems to be working now, but this has happened in the past and the problem will come back.
View 1 Replies View RelatedWe have used Inventor 2010 with PSP 2011.
- Recently we have upgrade to Inventor 2012.
- Installed pspro_cad_fp_10.0.39.3 update for PSP Server and for PSP Clients.
And now, some drawings we can not open in Inventor 2012. Inventor crashes!
But some drawings we are lucky to be able to open and work with.
Drawings have the same template.
If the drawing is locked (read only) then inventor 2012 can open it without a crash.
If I drag&drop drawing out from PSP onto my Desktop, Inventor 2012 can open drawing without problems.
So we are not able to work with some drawings in Inventor 2012 and PSP 2011.
As the first and quick (and 100%) solution - rollback to Inventor 2010 can cost us about 5 man-days of work. (Because we have done some work in Inventor 2012 allready and will not be able to work with this in Inventor 2010)
I am having an issue running AutoCAD LT 2011 on a Windows 7 Pro 64-bit. If I have orthographic dimensions on the drawing, AutoCAD crashes if I try to move, modify, or delete the dimensions. Recovery does not work. I am stuck with the dimensions once they are placed because if I touch them, the program crashes.
I do not know if this is important but I will include it anyway: this does not happen with older drawings that were created under older versions of AutoCAD LT. It only happens with ortho dimensions created in LT 2011.
I have applied all the latest patches, drivers for the video card, and even tried opening the drawings in 32-bit mode. Nothing seems to work.
My system is a Dell Precision T3500 Windows 7 Professional SP1 64-bitIntel Xeon Dual Core 2.53GHz cpu12GB ramNvidia Quadro 4000 running Nvidia driver version 265.70
I am having a problem with AutoCAD crashing without fully loading. I will get the splash screen and the application background will momentarily appear with "AutoCAD 2011" in the title bar then it will all disappear with no visible error message. By checking ACD2011ENUAdlm.log in C:Documents and SettingsAll UsersApplication DataAutodeskAdlm I get the following error message:
3536 2010/10/04 10:05:39 Reason=Fatal error
Autodesk Inventor Professional 2011 will crash when we try open a 3D model (Inventor Component) as a Baseline View for a new "Drawing" file.
To replicate the error, we draw a simple Circle and extrude it so it is then a 3D Model. We then create a new "Drawing" file, click the Baseline View button at the top left, and then select the 3D Model Inventor file (the extruded circle). The program crashes and we get the following error from Autodesk Software, NOT Windows.
dumpdata.zip
dumpuserinfo.xml
Inventor11101152546.dmp
Version: 150239000 AIP
This is for our college... students need to perform this action for their exam. We have had success using the same software and OS configuration, along with the same steps listed above, on different machines on campus. Not sure what is causing the error on these machines.
I work with a national company that creates criteria drawings for new projects. They recently changed to the 2012 version but they save it down to 2007. There has not been an issue with opening files with my 2009 version until recently. All of the computers in our office are unable to open these new files, although they claim nothing has changed. My CAD will pop up a fatal error and shut down whenever I attempt to open the new files. I downloaded the 2013 trial version and saved the file down to the older version, but that does not work either. Newer versions do not seem to be affected by the files, just my 2009 version. I tried creating a new file in 2013 and saved down to 2007 format. When I try to open it 2009 there is no issue. besides purchasing a new version of AutoCAD?
View 1 Replies View RelatedOne to Five people has the same project loaded into their Project Navigator.
One of the people opens a plot sheet while using the Project Navigator.
ALL computers with that project loaded experience an Autocad 2011 Crash.
-No Error Message appears.
-Autocad shuts down completely with no warning.
-Simultaneously!
This only occurs with DWG files located under the Sheets Tab of the project navigator.
It is not Project specific. This has occured for different users in our office with different projects open. However Autocad only crashes for the users with the specific project accessing the plot sheet loaded.
We recently made the switch from 2009 to 2011. So far this is only a problem for projects where the plotsheets were created in 2009. We can't go back to 2009 to plot since the walls etc have now adapted to 2011.
I've tried this on three different machines now, definitely seems to be a bug. We are creating these on the X drive or Autodesk 360, do n't know if it does with any file folder, but guessing it probably does since the sync is an external process.
Autodesk Infrastructure Suite Premium 2012/2013
Windows 7, x64
Xeon E31225 w/ Quadro 600
AutoCAD Architecture 2011
Windows 7 x64
8GB RAM
Created new PC3 for KIP 3100 plotter using its AutoCAD Heidi driver for Win7x64. Upon plot preview the following error occurs.
This causes a crash report which has been submitted to Autodesk. The response was to install service pack 2. Error still occurs after installing the service pack.
Using the non-AutoCAD driver works.
Is there any way to put the 2011 topobase and the 2011 ArcGIS plugin into 2012 or 2013? Seems such a shame just to lost all of that functionality.
View 2 Replies View RelatedI have a user who installed Map 3D 2011. We originally had some install issues, but a clean install and update to .NET framework 4.0 has seemed to finally be able to allow us to install the software. During installation the AV software was deactivated. User has full admin rights. Now when he double clicks the icon to launch the software he's receiving an error dialog box that is titled "Exception in acmgd.dll ARX Command". The only way he can get it to run correctly is to right click on the icon and select "Run As Administrator".
View 2 Replies View RelatedHow do I find out or what are the KB short cuts for Revit 2011.
View 3 Replies View RelatedI change my motherboard ans proc and memory yesterday, but i don't reinstall windows seven, and now i don't have time to reinstal windows now.Before change my motherboard, 3ds x64 worked good, and now he crash on startup with the report error on jpeg attachement.
3dsmax_minidump.dmp
dmpuserinfo.xml
dumpdata.zip
(and it's written version 3ds max 13 - 64bits)
But 3ds max 2011 x32 works very good I need 3ds max 2011 x64 for use the plugins hair farm.
I already reinstall a several times 3ds x64 but nothing, et try to remove the three dmp, xml, and zip, and also put on Open GL
windows 7 ultimate x64
intel i7 2600 3.4 ghz
8,00 gb ram
geforce 8800 gt
I used to be able to preview an animation in 2010. Is it possible to do a Preview in max 2011? Where would I find it?
View 3 Replies View RelatedI'm trying to use Civil View for Max Design 2011.
I couldn't find the plugin in the original CD for Max 2011... I found one here:
[URL]
Problem is when I install it, I can't see the Civil View menu that usually appears. It says that the plugin is installed for Max 2011 but I can't find any interface for civil view in max.
Am I using the right plugin? Is it even available for max 2011? I tried installing the one for 2014 and it works perfectly. But the one for 2014 is included in the 2014 CD.
Is there a way to get the same colors on the drawing when exporting to ACAD?
1. If I user ColorIndex the colors are transfered from RGB => Color Index 0-255 giving slightly incorrect colors, this is what I use and have a VBA match the colors in AutoCAd, but unfortunatley I have a family where some objects are "correct" colors, but some object in the family just get wierd color and whatever I do I just can't get all of them to have the same. This uses the layers and properties file to define some colors.
2. If I use TrueColors in the export only the objects that have true colors set in the override, everything else is white. This does not as far as I can tell use the layers and properties file to define colors not set in the view manually.
I would like to have the Exported DWG use the same TrueColors as in the drawing with in the Revit Drawing, but apparently it is not possible.
My workstations have a long load time for 3DS max 2011 - not sure why is it so, but if you ask me I think that is not normal. Moreover its a 64bit machine.
View 7 Replies View RelatedHow can I use vector displacement in 3dsmax2011 ?
View 5 Replies View RelatedWhen I import a photo file from CS6 for MAC, 1x2" at 300 ppi, into Word 2011 for MAC on my new MacBook Pro, the file is importing to fill the page width. When I import a similar file from my old CS2 on the same new computer, the file imports at the correct 1x2" size. I think there is some setting I need to change in CS6, but have been through every place I can find to look.
View 2 Replies View RelatedI tried to call COM object created by C# from other C# module.
I did:
1. Create simple COM object by C#
2. Register it
3. Try to call this COM from other C# console application - it works fine
4. Create simple AutoCad module by C# with IExtensionApplication
5. Try to call this module from AutoCAD - it works
6. In Initialize() method I wrote:
Type myClassAdapterType = Type.GetTypeFromProgID("CoreAdapter.CoreAdapterClass");
acDoc.Editor.WriteMessage("Type is OK: {0}", myClassAdapterType.FullName);
object myClassAdapterInstance = Activator.CreateInstance(myClassAdapterType);
acDoc.Editor.WriteMessage("Created");
6. Open AutoCAD again
7. Load my module
8. I saw "Type is OK" (becase it was registered in registry)
But I can't create instance.
I have added reference acdbmgd/acmgd from C:Program FilesAutodeskAutoCAD 2011 with copy local =false I can see from the list the version are 18.0.0.0
But when I start debug the project I got the following error..This project used to work with AutoCAD2010, now just moved to 2011 I can't even start debuging
System.IO.FileLoadException: A procedure imported by 'acmgd, Version=18.0.0.0, Culture=neutral, PublicKeyToken=null' could not be loaded.
File name: 'acmgd, Version=18.0.0.0, Culture=neutral, PublicKeyToken=null' ---> System.Runtime.InteropServices.COMException (0x8007007F): The specified procedure could not be found. (Exception from HRESULT: 0x8007007F) at System.ModuleHandle.ResolveMethod(Int32 methodToken, RuntimeTypeHandle* typeInstArgs, Int32 typeInstCount, RuntimeTypeHandle*
[code]....
When JIT debugging is enabled, any unhandled exception will be sent to the JIT debugger registered on the computer rather than be handled by this dialog box.
Is there any way to import SAT or STP files into AutoCAD LT2011?
View 2 Replies View RelatedI've got a .PDF of a survey attached (not overlayed) to my site plan construct...on a printable layer. In my sheet it shows up. When I print preview it's there. When it comes out of the plotter it's not there. If I print the PDF by itself through Acrobat it prints fine. Is there a bug here?
View 2 Replies View RelatedWhen I try to install on my new computer I just keep getting a dialogue box that says "You cannot install this product on the current operating system". I purchassed Autocad in about January 2011 and have a valid licence. The setup program gives me no other options. I just downloaded the program files rather than buy a hard copy.
View 8 Replies View RelatedWe are geographically spread out and need to come up with a way to have all Civil 3D files locally available to each office. There is a way to replicate the files to every office. Has tried DFS?
View 1 Replies View RelatedDoes IntersectWith work with 2011? If not what is the fix? Apparently I cannot find the apparent intersection point of two lines.
If I try to use IntersectWith, I get an error that it is obsolete.