3ds Max :: How To Use Civil View For 2011
Jul 31, 2013
I'm trying to use Civil View for Max Design 2011.
I couldn't find the plugin in the original CD for Max 2011... I found one here:
[URL]
Problem is when I install it, I can't see the Civil View menu that usually appears. It says that the plugin is installed for Max 2011 but I can't find any interface for civil view in max.
Am I using the right plugin? Is it even available for max 2011? I tried installing the one for 2014 and it works perfectly. But the one for 2014 is included in the 2014 CD.
View 4 Replies
ADVERTISEMENT
Jun 13, 2012
I am just starting out in Civil 3D and we are using the 2011 version. Anyway I have created cross sections along the centerline of a profile. How do I get the elevations and offsets to show up without digits to the right of the decimal, in other words to the nearest foot (ie. 3820.00 = 3820, 50.00 = 50)?
View 1 Replies
View Related
Aug 15, 2012
What do I draw the existing pipes as that will be under the surface that I'm profiling? I have the surveyed invert points I'm assuming that won't be polylines? how to get the pipe to show at the proper elevation on the profile?
View 2 Replies
View Related
Mar 21, 2013
I'm trying to add assign a Pipe Network to a profile view Band in Civil 3D 2011. I was using COM to add profiles to bands because I couldn't figure out how to do it in .NET. But when it comes to pipe networks I don't see how you can do that with COM. How the .NET implementation is supposed to work? Here's the code I have that works for COM, except for the pipe networks. I essentially need to assign the correct pipe network to the band.
public static void AddProfileToBand(this ProfileView profileView, ObjectId profObjId, List<BandItemInfo> bandStyleInfosFromSet, ObjectId profileBandSetId){
using (Transaction tr = Application.DocumentManager.MdiActiveDocument.TransactionManager.StartTransaction())
[code]....
View 1 Replies
View Related
Jan 21, 2011
The view cube in INV2011 has the front view as the front view and the top as the top (I am using XY as top, and XZ as front). When I export to DWF everything gets turned on its side. XY is FRONT (previously TOP), top is upside down view of one of the sides. I've done the make current view home in 2011.
View 3 Replies
View Related
Apr 27, 2011
I have been using Maya 2011 for a while now with relatively few real problems.
Recently I followed a modeling tutorial and everything was going great until it came to the application of materials and rendering. I applied materials of my own design and when I click on the Textured view icon in the perspective window, Maya freezes and nothing works...I have to open the task manager and terminate the process and re-start Maya.
It does not happen with other models or animations that I work on, just this one. I have looked at all my settings and there is nothing unusual happening as far as I can see!
If I render the model, it works fine in: Maya Software (No problem - looks great!), Maxwell Render (fine but very slow) and Maya Vector (Fine but obviously not what I want!).
If I try to render using Maya Hardware or VRAY it freezes up Maya and I have to terminate the program as before.
Once again other models and projects render fine in Maya Harware or VRAY
View 5 Replies
View Related
Jul 2, 2010
Using "transfer Project Standards", I'm having trouble getting everything to come across, particularly the V/G Overrides Filters. They are included in the View Template in the original project, but are all missing after transfer.
View 6 Replies
View Related
Oct 27, 2011
All I have to do to get Maya to freeze is to open Hypershade and view all shaders.
View 2 Replies
View Related
Nov 26, 2011
In AutoCAD 2011. After a little bit the view cube stops working. Ill click for ,example, left side, and nothing happens untill i close out and reopen.
I sucks big time when your modeling and you use it constantly while drawing on different axises.
View 1 Replies
View Related
Nov 19, 2010
I have a iLogic question about finding out if a View exits..
Lets say I have a drawing that I want to read the scale of a view.. All the snippets I have found is pointing to the name of the view like "VIEW1". But if I have deleted the first view I created it will give me an error..
So, is there ant possibility to check if the "VIEW1" exits without getting an error?
View 9 Replies
View Related
Dec 20, 2012
I was wondering if after drawing an alignment, creating a profile, and profile view, is there a way I can mark items along the alignment so they could show up in the profile view. I am laying out a pipeline and want to have the profile display a marker for items such as tees, elbows, reducers and other items. The marker I would like to use will be something like the vertical style grade break markers.
Also on a side note, as each of these items will have a different name, is there a way that I can add these markers and then have each one with a unique name?
View 9 Replies
View Related
Nov 28, 2012
1. I had trouble with profile view of the alignment line shown. What step am i missing? Are there things that is turned off?
2. How can I best come up with the right volume to fill.
3. Do I need to learn the grading tools? or could i get buy with a section profile from the alignment. ( it is not even an alignment yet)
4. How to I render a rock fill in this cave-in.
The attached aerial image , has survey or cogo points that are imported to surface, to become surface points. . So I wanted to create a surface profile below and an outline of fill above it. Iideally the side profile would look like a trapezoid, where the base is the surface proile and top would be the design embankment.
But the reason , a surveying crew went down and took shots at the shoreline and a couple shots around the cave-in walls (higher elevation on the cave-in wall cannot be surveyed, although I coud have used a laser , did not) is so that a more accurate volume of the cave in can be obtained. I tried to label how far the road edge is from edge of the cave-in . Norice the higher elevations are the top edge around the cave in area.
The ouline for the embankment will be a mild slope then breaks to a more steep slope. like 4 :1 , then 1.5:1
View 5 Replies
View Related
Sep 23, 2013
I created 8 points (4 locations with 2 depths in each location) in the DWG of my AutoCAD Civil 3D 2013 project. I grouped these 8 points into 2 Point Groups: Point Group 1-high depth has Points #1, #3, #5, #7, and Point Group 2-low depth has #2, #4, #6, #8. I changed the 2D Wireframe to 3D Wireframe and on TOP view I saw Point Group 1 is on the top of Point Group 2 (because the 2 Point Groups have the same values of X- and Y-coordinates with different Z(elevation) value - see the first attached file. How can I change the TOP view to the TOP-FRONT view by using some Command to get this fixed TOP-Front view thar has the good separation of the 2 depths as shown in the second attached file?
View 7 Replies
View Related
Oct 1, 2012
how to create a section view for a pond other than quick view.
View 2 Replies
View Related
Aug 26, 2013
I have been creating directly the DWG of AutoCAD Civil 3D 2013 for a couple of months.I created a project for the 8 points (4 locations with 2 depths in each location - i. e. same XY-coordinates, but different Z) And I just cannot separate the 2 "depth" points of the "same XY-coordinates" location in the 3D Wireframe by using the 3D Rotation Cube. I wonder I should start the C3D 2013 with choosing the right Template, configuring proper Viewports and creating suitable View Frames. I don't know what Template is right for my project of the 2 "depth" points of the same location in the 3D Wireframe of C3D 2013 - see the attached file. what Template (.dwt) is right for my project, how to cofigure 2 or 3 Viewports, and create the View Frames.
View 1 Replies
View Related
Jan 18, 2013
I was given a horizontal centerline of a 5 mile bike path. We have to stake all the even stationing every 50 feet and all the VPC's and VPT's with vertical elevation. I have created the horizontal profile and also the vertical profile including all the vertical curve information. Is there an easy way to incorporate the elevation information back into the plan view so I can create points that carry x,y & z points that I can transfer out of autocad as a .txt file so we can upload it on our gps equipment?
View 9 Replies
View Related
May 29, 2013
Is there a way to easily add an object from a profile view to a plan view? I have developed a pipeline profile that has high and low points and I would like to show these points on the plan views.
View 9 Replies
View Related
May 15, 2012
We are geographically spread out and need to come up with a way to have all Civil 3D files locally available to each office. There is a way to replicate the files to every office. Has tried DFS?
View 1 Replies
View Related
Mar 23, 2011
how to explode a PDF in Autocad Civil3D 2011? I need to be able to manipulate the PDF by removing parts and drawings new sections.
View 9 Replies
View Related
Mar 11, 2013
We've recently done some work for an engineering firm, and have also recently upgraded to Civil 2013.
It turns out they are using Civil 2011, and obviously are unable to open our drawing. As far as I'm aware, they need a TIN surface and cogo points, but I'm unsure of how to provide them with this other than reproccessing the job on an older version of Civil.
I'm thinking that I might be able to export to LandXML to keep all my points and surface, and then just export to Autocad 2010 for the linework?
View 3 Replies
View Related
Feb 11, 2013
I am using Civil3d 2011 and the ribbon will not display. The button seem to work some times but I can't see the ribbon, QAT, or Infocenter. I tried relaoding the CUI files, updated video card drivers, Civil3D patches, even uninstalled and reinstalled Civil3D.
I can turn the ribbon off (ribbonclose) and the ribon area is rendered correctly on the screen. I can turn the menubar on/off and it works just fine.
I tried logging on to the computer as different user, as the administrator, etc. Same error.
I use the Ribbon but now I can't because I can't see it.
I have attached a screen shot of the ribbon area.
View 5 Replies
View Related
May 18, 2010
Are there any compatibility issues with Autoturn 6.0 (by transsoft) and civil 3D 2011. Our Traffic Engineering Division uses the Autoturn program for turning templates, etc.
Windows XP SP3
C3D 2011- 32 bit
View 5 Replies
View Related
Aug 8, 2013
We have some clients that are using version 2011 and we are using 2014. The landxml we made for them was too big for them to import. My boss made a DEM GEOTIFF to send as it was much smaller.
The client has called me and asked me how the heck does he import the file as he as never worked with them. I have a computer with a 2012 installation, but it's corrupt, none of the MAP utilities work.
how to instruct my client to import this file.
View 6 Replies
View Related
Feb 19, 2013
I have a job that the customer provide the original CAD files with Civil 3D styles in them. As the project has progressed we have found many of the styles were not created properly and notified the customer. They have told us to fix the errors and send them the corrections...
Now that I have one file working properly I have to push the changes to the 30+ styles through the 100+ files of the job. Is there a quick way to do this in Civil 3D 2011? (It is part of our contract to use this specific program and release year without converting the files.) Or do I need to drag-and-drop each style into each file?
AutoCAD Civil 3D 2012 (Primary), 2011 by contract.
Dell Percision T3500: MS Windows 7 64-bit SP1; Intel Xeon CPU W3505 @ 2.53GHz, 12.00 GB RAM, NVIDIA Quadro 600
View 4 Replies
View Related
Apr 30, 2010
I have yet to be able to connect to our ArcSDE database using 2011. In 2009 and 2010 Civil 3D I had to move 3.dll files from my ESRI directory to the FDO/bin directory for Civil 3D. This immediately allowed for a connection using CAD's Data Connect.
View 5 Replies
View Related
Apr 16, 2012
We're teaming up with an Architectual firm on a project. They use Revit 2013, we use Civil 3d 2011. They will have to save back for us. Will we be able to incorporate their dwg's into our dwg's and vice versa. If so, will the 2 be compatible with any issues?
View 2 Replies
View Related
Mar 9, 2012
Having trouble with splined polylines in 2011? I tried to edit a splined PLine and the program was unresponsive for about 10 minutes. After I edited the spline the drawing size doubled. I reverted to a backup and erased the spline. I drew a Pline and used Fit Curve with no problem.
I draw another PLine and didn't like the results. So I tried to spline it and now Civil is unresponsive for the past 5 minutes. I'm doing this on a different computer. So it isn't that particular machine or installation.
View 4 Replies
View Related
Aug 2, 2011
I cannot insert an ecw image in AutoCAD C3D 2011. Ecw does not appear as a choice when I use Image Insert. I have already downloaded the AutoCAD Raster Design 2011 Object Enabler.
View 5 Replies
View Related
Apr 3, 2012
Is there any way to put the 2011 topobase and the 2011 ArcGIS plugin into 2012 or 2013? Seems such a shame just to lost all of that functionality.
View 2 Replies
View Related
Apr 13, 2011
Have downloaded the raster object viewer. It seems all commands, typed or as menu tabs don't list .sid files as an option.
View 3 Replies
View Related
Jan 21, 2013
I received a 2013 dwg file and want to convert it to 2011. I am currently running C3D 2011. I used the DWG TrueView program and was able to convert the 2013 file to 2011, but none of the alignments, profiles or corridors converted over. How to convert a 2013 file to 2011 and get the alignments, profiles, corridors, etc., to convert over as well?
View 3 Replies
View Related
