VideoStudio :: Flip Ultra MP4 Files Crashes / Pro X4
Jul 4, 2011
I just downloaded Corel Video Studio Pro X4 as a trial.
It works okay when I import most formats of video, but when I try to import any MP4 from my FLIP Ultra HD, then try to play it, the program locks then crashes. This happens 100% of the time. I tried installing SP1. It installed without a problem, but the error persists.
It is not an issue of corruption. WMP plays the files without incident and Windows Live Movie Maker will import and edit these files without problem. Likewise for Windows Movie Maker on another system using Vista.
Incidentally, Corel itself will recognize and convert these same MP4's to MOV without a problem. And it will play old MP4's from my previous non-HD Flip without a problem.
View 4 Replies
ADVERTISEMENT
Mar 24, 2013
I have for a long time struggled with obtaining hi resolution maps to include in my movies of trips I have done.
I have searched the internet for images of such maps for download and even used screen shots when using Google Earth.
I always wanted a higher resolution so that I could ZOOM in without the image becoming too fuzzy due to the fact that I was ending with an image of only (say) 512 x 288.
I am also a fan of FSX (M/S Flight Simulator) and recently taught myself how to create photo-realistic scenery which uses the TILES from Google Earth to create extra large (in pixels) images of parts of the world.
Today I realised that I could use the same to create images for maps to use in movies (I recently created an image around 5200 x 3000 pixels - the only limit to image size is how much memory you have and so using a 64bit processor and system works a lot.
It is named sBuilderX and it is available from [URL]....There is documentation within the zip file HOWEVER to create the image files for hires maps you will need to search for and download file make_photo-real_ground_textures_in_fs_x.zip which is available as a free download at [URL]...
You may need to join the web site (FREE) to enable the download.
Within sBuilderX you can choose to use Google Earth or or Microsoft Live Virtual Earth, terrain or streets. Also note that the image files are BGL files only however you can change those to JPG if required.
Hope this may have useful for few people who like to include hires maps (which they can use zoom without loosing sharpness) in their movies.
View 12 Replies
View Related
May 20, 2013
i'm using videostudio x6 to cut and recode ts-files from am Kathrein UFS 923 sat recorder. But i have infrequent crashes during "opening video file". Some ts file makes the opening dialog hangs up (this occurs at the mouse single click on the ts file and the double click too Another software: DVD HD Studio 3 from Hanilein-Software manage this ts files correct ..
Exist a Corel-log-file to see the problem ?
View 4 Replies
View Related
Oct 2, 2010
Just got a new Panasonic SD700. It should effectively be the same as the other Panasonic 700 camcorders like TM700 and HS700, but this one stores on memory cards only.
Now, with my VS 11.5+ (Windows XP SP3), clips whose length is 1 minute or less work fine, clips that are 2 minutes cause my VS 11.5+ to crash when I try to preview them. So, I can insert all my clips in the VS timeline. SmartProxy is on and with SmartProxy Manager I can check that the proxy files are created (although it takes a very long time).
Then I do nothing but try to play a preview of the clips. Clips that are 1 minutes or less play well. Then I have two clips that are almost exactly 2 minutes. These 2-minute clips play for some 5 or 6 seconds, then the picture halts but sound goes on for another few seconds and at roughly 10 - 12 seconds I get the typical message "this software failed, do you want to send a report to Microsoft ".
The same problem occurs whether I directly copy the MTS files from the memory card and then insert in my timeline in VS or download the clips to my hard disc with the HD Writer software that shipped with the camera and that renames them to M2TS.
This is repeatable. Rebooting does not work. I installed the latest directx today. The total duration of my test projects have been 2 - 4 minutes.All my test clips are 1920 x 1080i PAL, with a bit rate of 16800. The Panasonic software is able to play the clips well. Project settings are default DVD.
I'd like to be able to make AVCHD discs of my footage as well as standard DVDs for friends and family who don't have BlueRays yet. A year ago I was able to edit some footage from a friend's camcorder and produce both DVDs and AVCHD discs from that material. The clip properties then were close to the same as what I am using today. But now I cannot even get started.
View 14 Replies
View Related
Dec 8, 2010
I am using a Flip Slide HD video camera. After importing the videos into Corel VideoStudio, a video that should be 25 seconds long only plays 12 seconds of the video. The big issue is that the rest of the video is not there. It's almost like someone cut part of the video off. When I play the video on the camera and on my desktop with Quicktime, it plays the entire video. After I import the video, it is cut in half again.
View 4 Replies
View Related
Oct 3, 2012
I would like to know if it is possible to get rid of the black box that comes up when using the Flip Album transition? I don't even understand why they have the box appear.
View 2 Replies
View Related
Dec 17, 2012
Please take a look at the attached dynamic block.
I have two flips in there, one verticle, one horizontal. For some reason, whenever I tell it to flip, and then select everything in the block, it doesn't flip the other flip's arrow.
Then, when I created the second arrow, and went back to include the first flip in the second flip's Action Selection Set, it doesn't pick it up. Doesn't matter if I do "modify selection set" or "new selection set"... doesn't matter if I select everything within (blue box) or everything that touches (green box).
Yet, when I highlight the icon box, it shows everything is selected.
Can flips not flip other flips?
Additionally, I want the rotation parameter to flip on the horizontal flip (so it stays outside the block), but I can't get that into the selection either.
What am I missing with these selection parameters?
View 5 Replies
View Related
Feb 25, 2011
I am looking for tumble transition "flip back" to center. I have VS 12.
View 1 Replies
View Related
Sep 29, 2008
I Have HP tx2550ee Tablet and Photoshop Hangs in its Initial
I Think This is The New AMD or ATI AGP Support Problem
View 2 Replies
View Related
Jan 4, 2014
I am trying to create 3D models that will be printed using a high quality 3D printer in Ultra Frosted Detail.
I am knowledgeable on how to draw my shapes and extrude them to 3D, but am curious is if I need to change the shapes to "solids" for the printer to print it that way? For instance, I have a model train car that I am working on, and I have attached the file below. What I did with this basically is drew the shapes and extruded them to the thickness that I needed (Measurements are actual size and will need scaled down after the model is complete).
So If I need to make them a solid, how do I accomplish that, and then join the separate objects into one complete model ready for printing?
P.S. If you need any details about this project, basically I am composing a railroad flat car, and have built the four sides as well as the top deck as separate pieces and will combine them all together as one.
2D Base Objects: This is the basic pieces in 2D wire that are drawn to life scale and have not yet been extruded to the proper width.
3D Rendering: This is a model i drew up before I realized I might need to make the pieces solids for 3D.
View 9 Replies
View Related
Oct 3, 2012
I want to make 3D assemblies of very thin layers (the layers have 1000000:1 lateral to depth dimensions) in AutoCAD. Currently I make them in PTC Creo, but I would like to move to using AutoCAD instead.
What is the best method to do this? Specifically, how can I extrude multiple (6-8) ultra-thin layers individually, then join them in an assembly which I can bend and flex to make 3D surfaces? I have attached a Keyshot render of a design I did in Creo. I would like to make the exact same structure in AutoCAD. The design is 6 layers stacked on top of each other, joined as one part, than manipulated into a complex, 3D shape.
Also, is AutoCAD the best Autodesk software to do this? I have access to the student versions of the Autodesk software if it makes a difference.
View 5 Replies
View Related
Mar 22, 2013
Executive summary of need: turn a color, line-and-fill Xara image into a very thin black line, no fills, no other colors.
I'm reproducing a 1930s - 1940s decal from a toy crib that we're restoring and repainting. The original decal on the headboard is deteriorated and flaking off, so I decided to reproduce it on clear inkjet waterslide decal paper. (White paper wouldn't work because of the open area between background ovals and the figure itself; here's the reproduced decal image - imagine everything not in color to be a clear area: )
However, since inkjet printing doesn't include opaque white, I need to manually paint white on the decal sheet behind the ovals and the figure to make the colors pop and to prevent the pink-painted crib background from showing through. I'd like to take the Xara image, copy it, then turn the copy into a very light black or gray line with no fills. This becomes guidelines for hand-painting
I'll print the black line version first on the decal sheet, paint white on it, then print the color version over top.How do I transform a copy of the original into my guidelines?
View 8 Replies
View Related
Sep 20, 2013
This evening I wanted to import a series of images from my card reader using LR (just updated to 5.2 from the 5.2RC); I have ~240 images to import. I always have LR set to convert to DNG on import, and also to save a backup of the original raw file (NEF) onto a separate HDD at the same time. LR has always been pretty fast to carry out this process: normally just a few minutes are required for that amount of images (not including rendering previews once the DNGs are imported). However, today it's suddenly become painfully slow - as I type this, it's so far managed to import a mere 58 images, having so far taken about an hour and twenty minutes! Each image is being added one at a time, with a long pause before the next one clocks up in the 'current import' folder. I've never seen such slow performance with LR before.
I wonder if this is a bug connected to the final release of 5.2? I doubt it, as I would have expected to have heard about this by now, but you never know...
I have recently - in the past few days - set up a number (at least 80) of new smart collections that pick up raw images taken at specific focal lengths, as well as another set picking up specific apertures used for each raw shot in the catalogue (unlike the majority of my pre-existing smart collections, these new collections are purely there for interest really - nice to see which focal lengths are the most used for example - but don't serve as an aid to any specific workflow). In short, I've greatly increased the number of smart collections running in my catalogue. Would having a significant number of smart collections slow down the image ingestion process? For example, is LR updating individual smart collections on the fly as images are imported, and thus having to pick through each collection in order to complete the import (I'd always assumed that this would all be added to a central index in the catalogue that the smart collections feed from, but perhaps there are multiple indexes, one for each smart collection)?
I guess the other possible cause could be a corrupt catalogue, although both the catalogue integrity check and optimisation complete without a hitch and everything else seems to be fine.
I'm on Win7 x64, running the LR catalogue and previews from an SSD (with images stored on a separate HDD), with an i7 3770K CPU, 16GB RAM, and an AMD 5850 Radeon graphics card.
View 2 Replies
View Related
Sep 12, 2012
For those who are familiar with the Ultra-Pipe Program, when I open a drawing from Ultra-Pipethe title layer is updated by the kbupdate.lsp file and the drawing decription (title Layer) is updated with the Circuit ID and TML range. Referencing the attached pdf, you can see that this would be misleading in some cases. I need the description in the title block to be updated with the drawing name instead.
We have changed the default layer colors before in the kbupdate.lsp so I know it's not impossible. I am 99% sure that the changes needed for the problem above would be in the same file.
View 1 Replies
View Related
Oct 5, 2010
Sometimes (only every now and then), when I try to render a project to AVI VS instantly crashes. Lets say I have three projects, project1, project2 and project3. Project1 & 3 will render to AVI just fine, every time. Project2 will crash every time I try to render to AVI. I can render any of the projects to MPG, MP4, WMV, whatever else I want. If I recreate project2 from scratch as Project4, it will then render to AVI just fine. If I remove >>EVERYTHING<< from all timelines in project2, then add a new clip that did not exist before, it crashes when rendering to AVI. Project2 contains both AVI and MPG clips created/captured with VS X3 just a couple of days prior. VS X3 has all the latest updates.
When I say render to AVI I mean I select Share->Create Video File->Custom->AVI and leave it at the default of 24bits, 720x480, 29.97fps, Lower Field First, Uncompressed, PCM, 48.000kHz, 16bit, Stereo. Video on the timeline includes MPEG-2, Lower Field First, 24bits, 720x480, 16:9, 29.97fps, VBR, LPCM, 48000Hz, 16bit stereo and Microsoft AVI OpenDML, 29.97fps, 30532.12kbps, uncompressed, 24bit, 720x480, PCM, 48000Hz, 16bit, Stereo.Although this is a rare occurance, it is a real pain to have to recreate the video from scratch every time this happens.
The computer is a new Windows 7 Pro 64bit, Core2Duo E7500, 4GB Kingston HyperX RAM, 750GB WD Black SATA, Radeon X1550, Asus P5QL/EPU, Pioneer SATA DVD+/-RW, Antec 380 power Supply. Windows has all updates, AV is Microsoft Security Essentials, software installed includes VS X3, Adobe PS Elements 8, Super Video Converter, Office 2010, Nero 8 Essentials, Microsoft Expression Web 3, QTIndexSwapper2, Filezilla, Audacity, Adobe Reader 10 and supporting software that those applications install.
View 1 Replies
View Related
Jan 22, 2012
I have a problem with VS X3 due to the fact that the burner crashes. I have made some DVDs with it previously. I have loaded VS X4 trial version and that will burn the DVD. I do not feel that I should buy the new version just to get the burner. The error message is:
Stopped working
Problem signature:
Problem Event Name:APPCRASH
Application Name:BurningApp.exe
Application Version:1.0.0.50
Application Timestamp:4b293ba0
[code]...
View 2 Replies
View Related
Dec 11, 2012
I installed a trial version of Pro X5 with Windows 7. Almost every time I try to capture video it crashes.
Camera is a Sony HDR-HC5E. The only format I am offered is MPEG. Sometimes it begins to capture, other times there is no picture on screen and nothing is captured, most times I get a NOT RESPONDING warning and Video Studio just freezes. Sometimes it works but very rarely!. I have reloaded X5 three times.
View 10 Replies
View Related
Feb 25, 2011
I just bought VSx4 but I noticed it crashes as soon as I try to capture
my camera: canon HV20 -firewire connected
my OS: windows 7
I already:
uninstalled, re-installed VSx4
turned off/pc - camera
connected/disconnected camera
since I installed vsx4 I can't capture in vs x3 too.
View 6 Replies
View Related
Feb 4, 2011
First, it took several days just to get it to install. It finally installed after a sys restore and I was off and running. I really liked the package, especially Express. I played with it for a day, liking it more and more, and then all of a sudden it says " Corel has stopped working". Does this when I trying to do anything. Last thing I did was edit a few old clips and put them back in the folder with the originals (renamed). Could this have caused it? This is getting to be a High Maintanence program.
View 2 Replies
View Related
Feb 6, 2012
I purchased Ulead Video Studio 10 for my son about 4 or 5 years ago and installed it on his Vista machine. When first installed, it worked great. After a few months, it began freezing and/or crashing his computer. I was unaware that he was having problems. He just kept rebooting and then continued until his project was completed, or just got frustrated and quit the project.
When I discovered he was having these issues, we found and ran the available Ulead patches, which improved things a bit for a while. Then, having issues again shortly thereafter, we upgraded to Video Studio 11, which again improved things for a short while. He has been unable to complete a project within the last year. Video Studio is at a point now where it freezes constantly and Vista pops up the message “Ulead has stopped working” with a “Close Program” Button. Sometimes it takes 10 or 20 minutes to freeze, sometimes it freezes instantly and sometimes in between.
View 9 Replies
View Related
Aug 13, 2011
I've been using VSX4 for about 4 weeks without any problems, aside from the very occasionaly crash. The last time I used it was three days ago.
I've tried to use it today to find it crashes at startup every time. I have restarted my PC several times to no avail. As far as I can recall, I have not installed anything in the last three days, or updated drivers.
I have uninstalled and then reinstalled. Again, to no avail.
VSX4 creates a dump file each time, which I can't view in any software I have.
I have tried contacting Corel but get a very cryptic message that a case has been created then "Case creation fail" message!
View 2 Replies
View Related
Feb 10, 2012
VideoStudio PRO X3 crashes very often when rendering a VSP-file (with m2ts videofragments) that contains also transions and text.
It happens when I want to create a HD-file (PAL, Blu-ray /MPEG or H.264/ 1920*1080). Disabling SmartRender did not work. Also setting off hyperthreading did not solve the problem.
The problems do not occur when the VSP-file only contains m2ts fragments.
The recommendations given by Corel Helpdesk (download & install VS updates, C++ and DirectX updates) were not very useful because I had already implemented the most recent updates
My current version of VS PRO X3 is 1.6.2.69.
- Does these kind of problems also occur with VS PRO X4 Ultimate?
View 4 Replies
View Related
Apr 25, 2012
I've been using VSX4 for about 4 weeks without any problems, aside from the very occasionaly crash. The last time I used it was three days ago.
I've tried to use it today to find it crashes at startup every time. I have restarted my PC several times to no avail. As far as I can recall, I have not installed anything in the last three days, or updated drivers.
I have uninstalled and then reinstalled. Again, to no avail.
VSX4 creates a dump file each time, which I can't view in any software I have.
I have tried contacting Corel but get a very cryptic message that a case has been created then "Case creation fail" message!
View 1 Replies
View Related
Sep 4, 2011
So I had VS x3 and it started to give me serious problems, i.e. no longer able to export to MPEG-HD, So now I have X4 thinking it would resolve my issues, but no. Now I cannot even launch X4, as soon as it opens I get an 'unexpected error, program needs to close' message. It freezes immediately, and I cannot even open any menu items. I have tried removing and reinstalling QuickTime 7.55, also tried updating my codecs and uninstalled/reinstalled VSx4, none of that worked. I installed this program on my desktop, and it works fine there but ther only difference there is my desktop runs Vista Ultimate 64-bit, and my Alienware M11x runs Windows 7 Home Prem 64-bit.
View 5 Replies
View Related
Jul 9, 2011
I've been a VS users since version 6 and have been able to work around the many nuances that each version upgrade had. I upgraded to VS X4, got myself a blu-ray burner and some BD-R's, and prepared my home videos. I'm consistantly geting the 'Unspecified Error 5:0:0' during the burning stage. After 6 wasted BD-R discs,.
Camera: Canon Vixia HF20, all AVCHD formatted video
Background music selected for all menus
Motion menu checked (tried unchecked as well)
No background image (using one of the provided 8 templates)
Moving path unchecked (tried checked as well)
Menu In/Out: none (tried both enabled at default, initially)
Video length is 19.66GB total, 26 menued video segments
I've updated to X4 SP1
I even tried copying over the afCvtTitleMenuRenterUnit.dll 'fix'.
For the video segments, I initially let X4 render them all. When it failed, I created video files (previously my standard method when making discs), creating .m2t (blu-ray H.264 (1920x1080)) for each segment and used those video files for all future burning attempts (as opposed to the VS Project files).
I can see the blu-ray disc has almost fully been written to after ejecting it (after the error). However, it can't be read either on my computer or on a standard TV blu-ray player.
I haven't tried burning a DVD yet, and will try that next to see if this is just related to blu-ray discs, or not. I can't really tell if all of the other posts on this similar topic were in regards to DVD burning, or blu-ray burning.
Running into this issue on earlier verisions, I was able to make an ISO file then burn a DVD with other software. That option doesn't seem available for blu-ray discs?
View 3 Replies
View Related
Mar 3, 2013
I wanted to make a gameplay, with voice-over, but every time I try to render the project, the Videostudio crashes (When I try to reder it as MPG/MP4/WMV, it crashes at 4%, when I try to render it as avi, it crashes at 91%) SP1 installed. Video files and audio files:
Note: The first Windows shows the bandicam-video properties, and the second one shows the screen capture properties. (*recorded)
My hardware informations are on my profile. The Event Viewer (or something like that, I have hungarian windows) says this:
I tried everything, Even recording my screen while playing the project. But the video was lagging.
View 6 Replies
View Related
Sep 19, 2011
i have the Pro version (purchased) with SP 1 (VS X4) But i have one error all the time, it crashes at exit, all the time.
I cleaned up temp folders, run disk cleaner in windows, run CCleaner and other utils.I also deleted all registry entries to VS X4 i could find, reinstalled VS X4 with SP1, but same problem.
System: win 7 32 bit With Nvida card 500mb
CPU: Intel core duo 2.8 GHz
4 gig ram
about 200 gig free at system-disk
View 3 Replies
View Related
Sep 10, 2010
My VideoStudio Pro X3 crashes every time I run a project. The projects vary in length from 15 seconds to 30 minutes and comprise MP4 files in one and MOV files in another. I have applied the latest patch, but that didn't work. When it crashes I get the following error message:An unhandled win32 exception occurred in vstudio.exe [9600]. Each time the number in square brackets changes as well. I have an HP PC running XP with plenty of grunt and 900GB of disk space and 3.84GB RAM. The files are coming from my Digital Video Camera HiD with a resolution of 1920x1080. I have the latest versions of Quicktime and Bonjour.
Since purchasing the product last year I have not been able to use it and each time I fill in the contact form to send to Corel support, I hit the Continue button and nothing happens, so have not been able to get any support from Corel. There is no error message or reason for not being able to contact Corel.
View 14 Replies
View Related
Dec 2, 2013
I have a 1 hour long project. Nothing too complicated. There are about 20 smart sound clips, no clip longer than about 4 minutes. If I disable the Smart Sound track, the project renders correctly. If I enable the smart sound track, I get a crash at about 95% along the render. If I select smaller portions of the project, say 15 minutes of it. It might render. Sometimes yes, some times a crash at 95%. what I can do to fix the crashing with smart sounds?
Note, same project on two different machines acts the same way. Reseting VS X6SP1 didn't change a thing.
View 1 Replies
View Related
Mar 6, 2013
I have been using Pro 4X for just over a year now but have recently been experiencing crashes while encoding HD MPEG files. I have also just activated/unpacked the included music with the software and these issues just started after I did this. Note: I do not use the provided music but believe the conflict is because of this.
Problem signature:
Problem Event Name:APPCRASH
Application Name:vstudio.exe
Application Version:14.0.0.0
[code]....
View 1 Replies
View Related
Sep 15, 2011
My evaluation copy of VideoStudio X4 crashes whenever it tries to write an mpeg4 file. I get a message to e-mail the DMP file but thee is no e-mail address given or found on this site.
View 6 Replies
View Related
