I have been trying to burn a Blu Ray project. It is a 108 minute compilation of HD material that I assembled over the last year and am scheduled to show it Christmas Eve for my family. The project burns fine to a Blu Ray disk and plays back fine however for some reason, it will only burn in stereo and not Dolby 5.1. I have 5.1 sound enabled in the settings and when I burn the disk it is also the audio format I have chosen. I have burned two disks with the same results. I burned a test Blu Ray of this project back in November and it was encoded correctly in 5.1.
Running Ulead Video studio 10 Plus and have used it well for the last few years, on Windows Vista Home ed. Have put the audio on to the project as i always have and ever had any problems wih it. Now though it will only play the sound when the audio clip is selected and not when project is selected, although the coloured lines move on the mixer in both sourround sound and non-surround sound when project is selected.
I have a black magic and have problems setting the sound properly in PR to get the sound out through the black magic. Although settings seem to have been done properly, there is no sound coming out. When I start the setting again, most of the time the settings have automatically changed and are not on the black magic anymore.
I have recently completed a new project and made a video file (using the DVD option). This video file plays perfectly with media player etc., but when I the burn a DVD from the file all I get is the pictures with no sound.
I am using VS Pro x4 ultimate - what I am missing (apart from the sound! )
I'm using a freshly installed VideoStudio Pro x5, so all settings are standard.
I imported XXX.MTS files (AVCHD) from a camcorder into VSX5.
Info on the files File format: NTSCVideo Type H. 264 29.97 fps Audio Type: Dolby Digital 48khz , 2 ch Bite rate 18.00Mbps
If i preview the files before putting them into the project, there is no sound, movie plays fine. If i add them to the project and select "project" instead of clip there is sound... If i add them to the project and select "clip" instead of project there is no sound...
I import any mpg file which are known to have sound and when i ty to play it there is no audio at all from Pro X3. This has been working all along and it just seems to have stopped. I have made sure of the obvious things.We get sound from other apps so the computer and speakers are fine. I have checked the sound icon from within Pro X3 and it is turned up to max.
Whenever I import an AvI file into Corel Video Studio Pro X5 there is no sound whatsoever. Other file types work fine, but any and all AVIs I try will not play back any audio. I have tried at least a dozen from different origins and no success.
I'm outputting DV-AVI files filmed on a Sony A1 in DV CAM as MPEG-4 videos for upload to Vimeo.
The projects and source files are:
PAL (25 fps) Microsoft AVI files 24 bits, 720 x 576, 16:9, 25 fps Lower Field First Matrox DV/DVCAM -- type 2 PCM, 48.000 kHz, 16 Bit, Stereo
I have been outputting to upload the files to Vimeo as: MPEG-4 Files 24 bits, 1280 x 720, 25 fps Frame-based H.264 Main Profile Video: 5000 Kbps 44100 Hz, 16 Bit, Stereo MPEG AAC Audio: 128 Kbps
My question is if there's any benefit or drawback to outputting at 256 Kbps sound instead of 128? The file sizes are pretty similar (I guess the extra sound quality takes a bit of the picture kbps instead?) but I can't notice a difference with either image or sound quality.
I have a short project which I am trying to burn on to a DVD. When I play the DVD after I have successfully burned the project, I get video but no sound. I have tried both normalize audio checked and unchecked with the same results. I am using DVD-video as the recording format. I am running VS Pro x4.
Using VS Pro X2 on a 2.67GHz i5 with 4GB of memory running Windows 7 Home Premium.
Had lots of problems creating this project as during rendering to DVD or to a file it would get about 80% and then get the dreaded "Program not responding" message from Windows 7 Home Premium. I solved that problem by reducing the size of the many images that I had in the project and successfully rendered to an mpg file which has sound ok.
Now when I try to render to a DVD, at the preview stage there is no sound, but there was sound before I reduced the size of the images in the project.
I am using VideoStudio X5. Generally video clips in various formats play properly in VS - except for MPG clips. In the case of those, the sound is very "echoey". In other words all the sound is repeated just a second or so later even though I know it is fine in the original. I do not have the same problem in other formats such as avi or wmv.
I'm using win7, and just from today, x4 has stopped giving any sound output. Playing mpg files I can see the sound levels in the mixer, but there's no output audio. I can hear mpg audio in other players, just not in Corel.
I am attempting to transfer old VHF video to DVD. Using Hauppauge win Tv capture I achieve a surprisingly good quality sound and vision when capturing and all appears well. But! when I play back the VSP, after approx 2 seconds the sound starts going out of sync and progressively gets further and further out of sync, at worst approx 1 min separation. I hoped that after rendering this would correct itself, but no. I am using UVS 1.
I just began using Version X4 of Corel VideoStudio Pro.
I just used it for the first time after upgrading from X3. I rendered a short video and when I tried playing it back the slide moves across the "time bar" BUT there is no motion on the screen. The same when I tried to play it w/Windows Media player.
I started coverting MPEG 4 video to DivX which always worked in X3. No I get no motion at all and no sound. Do I have a bad download?
I am using Corel Video Studio Pro X4, I have asked the below questions previously, so far there has not been a solution. It appears Corel do not have any way to contact them when there is a problem
I chose this programme over Cyberlink Power Director as it had the 5.1 mixer and 3D capabilities. I now find Power Director Ultra 10 now has the 3D Capability, the 3D works very well, but no 5.1 mixer only a pesudo type 5.1 sound, the programme itself looks to be excellent quality.
Should there be no solution to my above problems, then the only choice I have is to use Power Director, a pity.
My previously posts are below -
3D Anaglyph - viewtopic.php?f=1&t=44703 5.1 Sound - viewtopic.php?f=1&t=41984
I own a copy of Corel Video Studio Pro X3. Since installing the patches for it, the sound stutters on the finished videos that I make. Original files are fine. I had this problem on the previous computer I used this program with, and after searching this forum, found a hotfix for it. Unfortunately the hotfix link is no longer working.
I am editing videos (that need to be completed urgently) in Corel Pro X4 and have serious troubles. VSP file looks absolutely fine during Project preview. Yet when MP4 file is produced (iphone/ipad HD format as suggested originally by support for the web) – then the sound disappears after a few minutes.I tried to play this MP4 of a few different computers and it looks the same. I am in deep sh…t with all my 20 videos.
I do have an video cd contain an mpeg 1 file and I am trying to convert it to dvd PAL I start the VS x12 trying to create a dvd but it is creating it without no sound so I try to make it as an iso file an I mount it to playing it in windows media player same problem the media player playing it without no sound so I tried to create an mpg2 file with 720x576 and 3500 constant video data rate Audio format :mpeg /stereo 224kb/s When I am doing this the mpg working very well with sound normally in media player so I try to create a dvd from this mpg file the same problem happen again the VS x12 create the dvd without sound.
I am new to this, I have just bought EasyCap adapter with audio it came with VideoStudio 10.0 and I am trying to copy my old holiday videos from my Hitachi VM-E210e 8mm camcorder which plays fine on the tv with sound but I only get a picture on my preview screen on my laptop and the sound from the room not from the video, the camcorder uses a yellow and white jack plugs to a usb, so the picture is ok but the sound is not from the recorded tape in the camcorder. i am using win 7 Home Premium, also I am totaly confused as to what to save them as (dvd,wmv etc etc) I would like to save them to disks to give to the family to work on their dvd players and computers.
Opened VideoStudio to re run an old .vsp file and the sound had disappeared completely. I checked using a music file and again there was no sound. Other programs are fine, Youtube works OK and my Microphone is still operating.
The loss of sound seems to only affect VSx5. I cannot work out if it is the program that has corrupted or I have pressed the wrong button. I have checked all the usual suspects like the mute buttons and these are OK.
I somehow caused my sound track to overlap. I can't seem to remove it. Down at the bottom of the picture looks like a white X on the bottom music track.
I hesitate to mess with it much because I had two video tracks and spend some time getting them synced.
I am trying out a few video editors, having never worked with one before. I shot a video with my camera and have imported the MP4 file into VSPro x4. But I would like to disable the audio track --to silence everything my camera's microphone picked up when I was shooting the video and save the result as a "silent film" also in MP4 format. I don't even need to do any splicing or cutting at this point. But I cannot figure how to kill the sound. In one of the products I'm looking at, there's a Disable Audio option on its Output menu. I cannot find a counterpart option with Corel Video Studio Pro x4. Does it have this capability?
i was work on some project and it's was going well and everything was just fine but then i've saved it and close the program (went to watch tv). after few minutes i've opend the program again but then the sound didnt play with "project" but only when i play the clip alone or in edit sound mode. * when i'm playing the project on "audio" instead of "thumbnail" it's working fine...
Corel VideoStudio Pro X6. The file is made in H.264 Video M2T ( large ) , in the DVD - mismatch-Sound !!!. If an MPEG-2 , the output DVD OK !?
VStudio X6 : there are 2 of the same file , 1 made in H.264 Video M2T (20000 bit) ( 1 hour ), 2 to MPEG-2 Video M2T (20000 bit)( 1 hour ) . When recording to DVD - 1 file ( H.264 ) - in DVD is sync sound , if 2 ( MPEG-2), then the DVD is fine . Why do so with the format - H.264 Video M2T ?
I have been using this product for years on XP, with success. However, just this past week, when I try to add an MP4 to the timeline, and play the clip or project, there's no sound, for about 80% of MP4's I've tried. I have uninstalled the product and SmartSound (both), and reinstalled, including all patches, having tried the sound before installing the patches. I know my hardware and OS are underpowered, but it worked, prior, without me making any system changes before this situation arose.
I am a Video studio PROx4 user. Recently, I had some old 8mm films transferred to video and now I'm editing them in Videostudio prox4.
I have a few clips where I want to add sound; HOwever, when I drag the sound clip to the Voice track or the music track, the clip remains silent. The original clip seems to have a audio track already. I can split the audio and the delete the track from the voice track, and then unmute it and re-submit the music track I want to use but it somehow doesn't do the trick.
I am trying to export my 3D project as 3D (MVC) but I can't get VS to preserve the 5.1 sound. Either I get a 3D movie file with stereo sound or a movie with surround sound but then it's only 2D.
How to do this properly? I also tried creating a new movie template but it doesn't offer any 3D/MVC export option.
I have been recording some narration in little chunks (for easier editing if needed), but they are called uvs130819-011.WAV. I understand about the date, but I would rather have them named by the first few words of the "paragraph" read, or something else that would make more sense to me.
Is there a way to change the name of the sound clips ?
