Revit :: Make Spot Elevations Not Be Sticky?
Jul 12, 2013
Is there a way to make spot elevations not be sticky?
When I am annotating spot elevations in a site plan on a steep slope with retaining walls, the spot elevations keep snapping to points that I don't want them to. When I get close to a point I want to annotate, the spot will jump to another point that is close, such as the bottom of a retaining wall, and I want to annotate the grade at the top of wall.
Snap Off doesn't work.
Is there a setting buried in Revit that can be changed to control this? My guess it that it's built in and can't be changed...
View 4 Replies
ADVERTISEMENT
Mar 5, 2013
I have a topography model that I've been working with for a while now, and all of a sudden the spot elevation stopped working. I have one spot elevation that works, that i can move around and it'll change to the right plus height. But as soon as i try to make a new one it just says -0.05 no matter where i put it except for if i hover over a stair, then it displays the correct plus height.
View 5 Replies
View Related
Dec 19, 2013
How can I make sure the annotated surface labels spot elevations from my 3d design drawing which is being xrefed into a new Precise Grading Breakout Sheet plots screened?
The Label Style which I created for the annotated surface label spot elevations has all its properties set to be ByLayer for example its color and lineweight. The Layer I assigned the Label Style was assigned to a layer with a color and plot style that should plot any object screened. Color 8 and Plot Style Screened.
What other steps am I missing to assure myself that this Label Style will plot screened in my new Precise Grading Breakout Sheet?
I also made sure that the xref drawing in which this Surface spot elevation has the correct colors and lineweights and Plot Styles in my new Precise Grading Breakout Sheet.
View 5 Replies
View Related
Sep 6, 2012
In 2012 I can no long grip a spot elevation RC copy. It just ignores it an moves it to the new location.
Is there a setting I might have to re-set?
View 4 Replies
View Related
Jun 5, 2012
In the previous versions of Photoshop I've used (CS3, CS5), when I opened multiple panels (e.g. History, Info, etc) they would all stay open for reference. However with CS6 I've noticed that if I have, say, the History panel open, and also open, say, Info, then the History panel closes.
How can I change this behavior such that each panel I open will stay open and visible until I direct it otherwise? It's frustrating to have to keep using Window->History (or whatever) each time I need to see one or the other.
View 5 Replies
View Related
Nov 17, 2011
Tech- MacMini 2011, Lion, CS4
I edit color in LAB mode. In CS3 I would use the eyedropper tool to select a neutral point and then a levels layer to adjust the color while I was watching the LAB sliders in the color panel. Quick and easy.
Now the problem. In CS4 the color panel changes to greyscale when the levels layer is highlighted. How do I make the LAB sliders sticky? If I edit the color with simply a levels adjustment (not layer) it still works the old way I am used to. I toggled the dynamic slider preference to no avail and I can't find anything else I can change.
View 1 Replies
View Related
Oct 19, 2012
I just completed my first topo using Civil3D 2013 (yay!) and now I want to send it to a client. However, when I save it as an ACAD 2007 file and go to open it using ACAD 2007 the spot elevations and all text and symbols associated with them disappear. I can't imagine that you have to have Civil3D to view a Civil3D file. Is there something I can do here?
I did not create a survey database with these points, just imported the .txt file from the field.
View 1 Replies
View Related
Jan 8, 2014
I created the attached block to add spot elevations to a drawing. The block has attributes allowing elevations to be manually typed in, but also includes many dynamic features for rotation, lengthening, mirroring, etc. The block was created as an annotative block.
The block and all of its features work perfect as long as the dynamic features (rotation, etc) are not used after additional annotative scales are added. I often times have a drawing set at 1:10 or 1:20 scale and need to do an enlarged detail at 1:5.
What I would like to do is have this block set at 1:10 scale and 1:5 scale and manually rotate it (ideally using the dynamic features) at different angles for each scale. Is this possible and if so, why is it not working with this block? This works flawlessly when using annotative multileaders, so why shouldn't it work with blocks or is this just too labor intensive for the software?
I have also tried attsync, etc. and often times when rotating at different annotative scales, the text attributes go "bonkers" for the opposing scale when applying attsync.
View 0 Replies
View Related
Oct 20, 2011
It is almost seeming like you should not try to creat these views in templates to get a jump start on projects. but for the life of me I am not understanding how you can get level lines to appear elevations that have already been create. or in new ones?is there away to successfully get these back?
View 3 Replies
View Related
Aug 13, 2013
Several buildings are linked and share coordinates. How can the host file be used as the datum base Finish Floor 0 and all the other buildings relate, even though at different elevations of floor levels? Right now the sections show FF 0 for all of them and they are at different heights.
View 1 Replies
View Related
Dec 5, 2013
This and other elevations have lines between new and existing walls/soffits. Joining doesn't eliminate the line. The existing wall is also in a group.
Is there any way to selectively hide an edge in an elevation?
AutoCAD 2010
AutoCAD LT 2013
Revit Architecture LT 2013
View 2 Replies
View Related
Dec 12, 2009
was setting up my printing sheets when i noticed my south and west elevations are showing up as sections. how to change back to elevation views.
View 3 Replies
View Related
Aug 5, 2013
When I open a number of templates, I will see a Basement Plan, however when I go the the Elevations I do not see a Basement Level.How do I add the Basement Level to the Elevations ?
View 5 Replies
View Related
Mar 8, 2012
I've been away from Revit for awhile. Isn't there an easier way to edit lines in elevations without creating dozens of masking regions to hide model lines from walls, roofs etc.?I thought in older versions, (I'm currently on 2012), that you could just select lines to make them invisible.
View 1 Replies
View Related
Feb 10, 2014
I am trying to generate counter elevations from my Revit Model. I am designing a coffee bar area and have developed a Revit family for a "U" shaped counter. In trying to set up my elevation, I notice my elevation views of the inside right or indise left of the "U" shaped counter are blocked by the opposite leg of the counter.
Also, I am trying to generate an elevation of my rear support counter and it seems to be blocked by the bottom of the "U" shaped counter. I have attached a sketch of the plan view of where I have set up my elevation views.
View 9 Replies
View Related
Feb 23, 2014
How do I edit the points in the toposurface programatically? Like the elevations all increase 2 times the original one.
View 3 Replies
View Related
May 30, 2013
I want to create sections and plans showing interior finishes. As walls are all of the same structure I used the split face tool. When applying 'paint' to the face it only gives me the options of materials not fill patterns i.e. hatches. How do I get it to apply hatches or is there a visibility setting that i need to change.
View 1 Replies
View Related
Oct 21, 2013
Background: infrequent user who is in AutoCAD withdrawal but forcing himself to move to Revit.
I've just started a new project. I've imported a survey done in AutoCAD and converted it to a Topo surface.
The surface appears in two of the Elevations (East and North), but not the other two. I have two empty views. I've turned off Crop View. When I did this and a Z A, I was able to find the East and North elevations and move the views over to them. However, I can't find the elevations in the other views.
View 3 Replies
View Related
Oct 17, 2013
I downloaded a pocket door from Revitcity.com and noticed that whoever created this family had one of the "controls" that flips the family on the elevations. When I am in elevation view my controls are grayed out. Just wondering how to place a flip symbol on the elevations?! I would love to be able to switch the swing of a window or door on the elevations!!
View 5 Replies
View Related
Apr 2, 2013
Is there any way to show my detail views in my elevations?
In autocad we use a little line with the detail number, but I can't find anything like that in revit. I've attached an example.
View 2 Replies
View Related
Jul 26, 2013
I have adjusted my North Elevation (using View Graphics) exactly the way I’d like it to look in elevation, and would now like to apply those same visibility adjustments to my other elevations. Is there a way I can save that view as a template and apply to other elevations, or do I instead need to create a view template, make all the adjustments to that template, then apply the template to the elevations?
View 3 Replies
View Related
Jun 25, 2012
I had a few exterior elevations (actual design elevations not 3d) of a building that looked great and had nice shadows and materials and everything was wonderful until today when I turned off a couple section marks and a level mark and then the back turned black and the dialog box in Graphic Display Options does not show the background section anymore?Now I can't even get rid of the black background!!
View 2 Replies
View Related
Dec 5, 2013
How to get the brick hatch pattern on my elevations to line up between levels. I have a two story residence with one wall the front that has brick all the up to the roof (the rest of the house has cement board side on the second story). My problem is that the brick pattern on the second floor wall does not line up with the brick pattern on the first floor.
I tried to just extend the first floor wall up to the roof, but I did not like how it wrapped around the corner of the second floor to tie in with the siding. Surely theres is a way to set the hatch patterns origin like in ACA so that all the bricks line up nice and pretty. Also would lining up the brick pattern on the quoins, which are, whatchamacallums... in-place-edit components?
View 2 Replies
View Related
Dec 5, 2011
I just download my Revit 2012 and the Project Browser does not show options for Elevations and Sections.It only shows Floor Plan and Ceiling Plans.When trying to bring Windows or Door, it says it is not loaded. It asking if I want load it. Well! The next step has 20 something options but nothing to do with Windows or Doors. How to get out of this Nightmare?
View 9 Replies
View Related
Mar 27, 2012
why have the levels not showing up on all of the elevations even when I adjust the drawing viewport??
View 1 Replies
View Related
Jul 12, 2012
I have a large building project with multiple linked files (building split into blocks plus furniture etc models) with shared co-ordinates. All are working fine except one which happens to be a furniture and equipment model. When sections and/or elevations are placed in either the host or the linked file the views do not corrospond with the cut line of the section or view line of the elevation, for example if I place an elevation within a room the elevation looks as if it has been placed in a different position some metres away. When the files are linked within each other using the shared co-ordinates they place themselves in plan and elevation perfectly. I am trying to create room elevations to show furniture/equipment layouts and this is making it impossible!
View 3 Replies
View Related
May 9, 2012
I know there are different ways to do this. Would like to know multiple options so I can see which might be quickest for me.
I have points with elevations and 2D plines at elevation zero drawn between them.
I would like 3D plines instead. This is the easiest way for me to transfer them to another drawing where I will make surfaces with them. I don't want to have to transfer the points over.
I can redraw the plines as 3D plines but this is time consuming and seems unecessary.
I don't want to have to convert them to Feature Lines either. I prefer they be 3D polylines.
Is there a simple command for this? I already have a surface containing the points and lines as surface breaklines.
Is there a project objects to surface command that will make these 2D plines at elev 0 into 3D plines while assigning elevations (and vertices) only at the current vertices?
What about a simple series of commands to convert the 2D plines to 3D plines, then force the 3D pline to take on the elevations of the points at its vertices? (I think this would be my preference, but don't know any of these commands or where to find them.)
View 9 Replies
View Related
Apr 30, 2013
One of my colleagues was able to insert Spot Elevations by picking anywhere on the surface of his floor objects in his floor plan yesterday (2013 Central file with two users working). Today, when he tries to place the same Spot Elevation object, he is only able to pick the floors at the perimeter of the floor objects instead of the surface of the floor. what setting or mode they accidentally changed to prompt this unfortunate behavior?
View 2 Replies
View Related
Oct 16, 2012
Spot elevation doesn’t’ take the correct measurement,
I tried to add the “spot elevation” for the stair plan but sounds not to take the correct value.
Software: AutoCAD 2014, AutoCAD C3D, AutoCAD M3D, Revit
Windows 7 (Ultimate 64 bits),
Firefox 20.0,
Kaspersky 2013.
View 2 Replies
View Related
Jul 22, 2013
What I have is a shape which uses a pantone colour. However, the background is also the same pantone colour and I'd like it to stay 100% tint of that colour. What I'd like is for the top shape to be darker than the background even though it uses the same PMS colour.
I've tried to do some reading about it, but couldn't quite get the answer I was looking for. I have my .ai file set to Overprint View and have given Multiply a try, but it doesn't look any different.
View 8 Replies
View Related
Sep 27, 2012
I have just discovered that Spot Elevation text is mesbehaving in rotated dependent views:
If you have an orthogonal parent plan view, then create a dependant view from it, then rotate just that dependant view, then place a spot elevation - the spot elevation symbol respects the rotation of the view (ie its paralel to screen/view boundary), but the spot elevation text remains in the orientation of the parent view. see attached image.
This does not happen if you rotate a normal Revit plan view; nor does it happen with a callout - both cases the symbol and the text are parallel to the view boundary. I think this is a bug?
View 3 Replies
View Related
