I'm trying to itemize every grid in the project and then export it to a text file. Grids are not an option under the schedule/quantities or material takeoffs. I'm not sure where else to start.
I'm using Revit 2012.
How do you extract an Export to DWG setup .txt file from a Revit project model?
View 3 Replies View RelatedI see that keyboard shortcuts in revit 2013 can be eported as xml and imported back from an xml? Is it possible to export the shorcut list as a simple txt file or excel file, for printing purpose. Some of the bim modellers in my office would like to print the shorcut and stick it on their desk.
View 2 Replies View RelatedI added a FILE PATH label on my titleblock but when I load it to my project file it does not show. Why it does not show, I added a new lable for CLIENT NAME it showed fine. Just to test it out I changed the lable of the second one to FILE PATH and the first one that I did to CLIENT NAME. When I loaded it to my project, the second label dissappeared and the first lable now shows.
View 1 Replies View RelatedOften as a sole user of Revit when I open a project I have been working on I get the following message:
"This file is already open for editing by another user. You will be unable to save any changes before that user closes the file."
Since I am the only one working on the project there are no other users and as far as I can tell no other files open. Any insight into what has triggered this message?
On my current project I get the error message "Software problem" when attempting to open the project file. This problem began last night and affects the project file and all automatic backup files of my current project. It does not seem to be affecting other projects.
how to recover this file?
I need to be able to combine two revit project models into one .IFC export per floor. Initially I was able to accomplish this by binding the linked subcontractor’s model into my project model and then exporting each floor as an individual .IFC file. Within the past couple of weeks my sub-contractor has nested face based families into some of the more compex casework families. These new families are throwing up errors during the binding process that result in the content being deleted. Ultimately looking for understanding these warnings and how to resolve them so that I can continue with the work flow that was initially in place. How to streamline this process in the long run. I started looking into plug-ins or supplemental software that might enable me to merge .IFC’s generated from two different sources. I haven’t had much success.
View 1 Replies View RelatedWe have to do a project in Revit The residential complex consists of 6 free standing buildings of a maximum height of 10 stories. Approximately 700 apartments.(50 different groups)The Office building is a 16 story high structure with a stepped silhouette GFA of the entire complex is 100 000 sq.m. We use Revit Architecture and Structure 2012. The project team is 12 people
How best to divide a file?
What will be the best allocation of project work?
What to avoid?
Some materials that describe how to work on such a project?
I've created a Title Block Family and when I bring it into the project I want to be able to edit the text on the project without having to go into the Family and edit it from there, how do I do this?
View 2 Replies View RelatedIs there any way to publish a revit project to a locally stored dwf file? I want my students to be able to submit dwf files for grading without setting up buzzsaw accounts.
Seems strange that there is no obvious solution in the ribbon. Are we relegated to printing to PDF?
We were updating the wall finish schedule in our template. Now using the template, if we create a new room, it's number is 3. Where is the setting that controls what the next available room number is?
View 2 Replies View RelatedRevit has a propensity to locate a lay-in ceiling grid with a grid intersection in the center of the room. You can use the alignment tool to align the grid with a wall. But I see no way to center a tile in a room. This is often a necessity in a narrow room, to keep the lights centered. Also, installers, when not given specific instructions to the contrary, will often locate the ceiling grid to minimize narrow tiles at the wall. We need more control over the position of the grid.
View 1 Replies View RelatedI have thought about this and want to get input on a best approach to utilizing Views created in a linked Revit project file. One need is to create a Callout within the current Revit project and reference a view from another linked project. This is a common need in many of our projects
View 3 Replies View RelatedI have a Revit file with over 1,000 materials and associated appearance assets. It was created in a previous version of Revit before library support. What I want to do is create libraries from them. However, the only instructions to add them one at a time using dragging and dropping. That will take me days to do. Is there a way to simply create an asset or material library out of multiple materials from a project file at one time without having to individually select them?
View 1 Replies View RelatedI am having some issues in exporting a Revit 2013 file to gbXML file. I have already followed the instruction steps about how to do the gbXML export in Revit 2013 given by the Offical Revit website.
View 9 Replies View RelatedI used railing tools and created railing in the project files. i want to change rail and Baluster.i created metric baluster and rail from family and saved in the local drive. i used in to my project also it is working fine.
i want to use this railing to some other project. how to get it either copy past or revit link or any other way because the railing created in project file.
I exported a Bim model (IFC format) from Butler Advantage XP. When I open the IFC in Revit it says that it can't create blend and can't regenerate family. When I continue, by deleting the elements, the model is without the roof on the building. Is there a way to prevent this from happening before I export it from the other program, or a way to fix it once I import it into Revit?
View 1 Replies View RelatedI have a larger Revit file that has linked in models (mutiple buildings - each bldg is its own model)
I need a COMPLETE file for Navisworks...
When I go to Revit, and try to export to NWC file, it starts the export process... about 40 minutes in (YES, 40 mins, it just loads and loads and loads) I will get an error message that "Revit has stopped responding"
This is now the 3rd time today I have tried this with no success. I also tried loading into Navisworks directly (Nav 2013) but will not read the files properly and bring them in together.
I know Revit 2012 is capable of exporting linked models to a single NWC file... however my computer does't seem to like it. I even just sat and read a book and did not internet serach or running any other programs at the time....
I NEED THIS TO WORK
Exporting each individual Revit model to NWC and recompling them in Navisworks IS NOT AN OPTION.
I need to export this large linked Revit file as ONE nwc file.. I know it CAN be done...
My laptop is fairly newer and has like 8gb of ram, so that shouldn't be the problem, is it?
how to import and export ETABS file to Revit Structure 2012 & vice versa. I need to show this to one of our customer how it can be done exactly. I could have tried this, but I don't have ETABS software.
View 5 Replies View RelatedI would like to create a Word/text file and import it into my Video Studio project file for the credits at the end of a play that I have taped.
View 6 Replies View RelatedIs it possible to export a Revit architecture 2009 file into Autodesk VIZ 2008?If it is, how do you do it?
View 3 Replies View RelatedI have a jpg file that I must use as a background in a Dreamweaver project. There is some text embedded in it that I can't edit. I have tried using Illustrator and Photoshop but I lack experience so I'm probably missing something.
The file address is lecaff.fr/images/home_banner.jpg
why the "custom text" and "start number" is not available anymore on Export?
View 2 Replies View Relatedi have any problem about export point from dwg to *.txt file.i have point file *.dwg from my friend,,but i confused why that point can't export, show warning "No point were transferred from the source" point is in layer 0...I attach the dwg file.
View 5 Replies View RelatedHow do I export all the text from a PS file to a text file like word?
View 1 Replies View RelatedI have this file that won't open in AutoCAD Architecture 2012, well let me rephrase that, it won't finish opening. It has 4 or 5 xref's attached. I was able to open this same file using 2010. Through process of elimination I was able to determine that a file that was exported from Revit MEP 2012 was the problem. When that file was detached the drawing would open just fine. To make things more interesting, I am able to open the Revit Export file just fine using 2012. What diabolical combination of event has happened to cause this SNAFU.
View 2 Replies View RelatedI've built a project up with several smaller project file components. It's an easier way to create a video than editing one big project.
Opening the overall project and running it on screen is not a problem. However, when I try to create a smart package of the composite project, I get a consistent error message rejecting the process because of the existence of the component vsp's.
Is there a way to avoid the error and create a smart package from a project file that has smaller component project files?
Is it possible to assign a project number to a project file and have it fill in the project Iproerties field?
View 2 Replies View Relateddoes AutoCad 2012 LT version can export text to csv or excel file
View 2 Replies View RelatedIs there a way to import or export a text file into and out of Photoshop, via text layers?
I'm aware of the being able to manually copy and paste, however I'd like to automate/batch this process.
I have a lot of AutoCAD files which have embedded OLE objects (excel) inside. I want to be able to export only the text from the Excel OLE object using VBA (or Lisp, I don't mind which) without having to fire up the OLE application (i.e. Excel).
The embedded OLE objects have no link to any external files - so I imagine it must all be held somehow inside the AutoCAD file, but how it can be accessed?!!?
